Amazon Basics Banana Plug Speaker Connectors, 6 Pairs (12 Pieces), 0.54 inches x 0.54 inches x 1.62 inches, Black

捻じれが気になり難いし。 ケーブルの締め込みにドライバーも必要ないなんて･･･。 使い易いが過ぎるっっ！

接続部分がねじ式になっているので、配線接続がとても楽です。複数の線を同時に繋ぎたいというときなどもとても楽なバナナ端子だと思います。コスパもいいしAVアンプ等での利用価値はあると思います。

簡単に接続できて引っ張り強度もかなりある。金属部分が隣と接触する心配もなくかなり便利に使える。価格は高めだが何度でも使えるのでお得だと思う。赤黒のテープは剥がれるので改善されれば完璧。

可もなく不可もなく

手軽で良いバナナプラグです。

スピーカーケーブルは接続しやすく、端子への挿入も適度な固定感があり良いです。 ケーブルと比較して重いので、改善要望としてマイナス１としました。 しっかりした作りで高級感もあるので、仕方ないかもしれませんが。

商品説明通りで品質も良く良い買い物でした。

2.1chに丁度の本数 ケーブルの接続もしやすくてgood

the design, fit and fnisinsh of these banana clips is perfect. starting from ease of attaching it to your wires to the fit while plugging them into the speaker and AVR terminals which is neither too snug, nor too loose. However, having attached them to both ends of my speaker wires and on playing music and movies through them, there is a very perceivable drop in sound quality. the sensitivity of the speaker has reduced which is in itself evident of transmission loss. this also has an adverse affect on the frequency range and response of the speakers while reproducing sound which now sounds muffled compared to when the speakers were connected through bare wires. I'm planning to get rid off them as the level of dip in sound quality is not worth the otherwise terrific ease of convenience that these banana plugs offer. for reference, i am running a pair of KEF Q350's for the front channels (on Sound Foundations Nemesis stands), a Q-Acoustics Concept Centre Channel and a pair of Bostons Acoustics A26's driven through a Marantz SR6013 AVR and a Marantz PM6006(as a power amp for the KEF Q350s), so the system is transparent enough to easily convey any shortfall in whichever component is introduced into the setup. Update 2020 : decided to reinstall them after all. The convenience over having to screw in bare wires clinched it. I just switched to better wires (Mogami Neglex and QED QX16) so the shortcoming may have been in the amazonbasics wire (or my head; i may very well have been imagining loss os sensitivity) - i think a pink noise test with a spectrometer with the volume knob at a constant position is in order to confirm my suspicions.

When I rewired my speakers, I used these. They work well, but they are rather loose. However they do not touch one another. So no problem there. They are super easy to use, change, etc. Recommended!

Ottimo prodotto buona produzione ,facile da installare ,peccato per il colore rosso del positivo che sembra troppo scuro e risulta difficile da distinguere dal nero del negativo, per il resto tutto ok, prezzo affare!

Saw these recommended on an AV forum, and when HiFi geeks recommend something, they're usually not wrong. You get plenty in the box, and they are surprisingly heavy and well constructed. Quite easy to connect to 2.5mm2 cable, although you might struggle with wider cables like 4mm2 as the entry is quite small. Once connected up they plug into the usual speaker or amp connection solidly and securely. I like that they have a reasonably clear red and black colour band that can be seen from above, to identify positive and negative cables easily. I could say that they deliver a clear, precise, and tight sound to the speaker but, at best, that is just my own ears telling me well done for my purchase. Obviously, there are much more expensive banana plugs out there, made of gold plated unicorn horn, and if that floats your boat, go for it. But these are great value, well made connectors that just get on with the job and don't get in the way of the signal pathway. Recommended.

Easy to connect up to my speaker wires with a very solid connection and they sound great