BIQU CryoGrip Pro Frostbite Cold Build Plate for Bambu-Lab P2S P1S P1P X1C X1E A1 3D Printers, Super-Tack Spring Steel Sheet, 257x257mm, Room Temperature Printing, Double-Sided, 1 Piece

Totally worth buying. Run cooler bed temps and still get better adhesion. Oddly enough I find I get a smoother finish from this plate than their Glacier, which is labeled as the smooth finish. Awesome texture, superb functionality, and high quality steel.

This plate has been amazing. Was having some issues either my original plate on my Flashforge AD5X after a few months so I threw this on and problem of bed adhesion were gone. PLA sticks great at around 40c bed temp and so far every has come out perfect. Almost sticks too well at times. Also I did the full calibration on my printer after installing and I fully expected to have to adjust the z height but even that worked out same as default. So far I have had no issues and would highly recommend if using PLA and PETG filament. The only drawback I can see is not being able to use IPA on it but it appears that the plate doesn’t need to be cleaned too often. I have printed on it every day for about two weeks so far and still going strong. Definitely worth the money. Just make sure to buy the right size for your machine and it fits right on the magnetic bed.

I bought this plate because I had several failed prints due to adhesion problems between PLA and Bambu standard textured PEI plate. This plate works perfectly - no need for messy glue stick. Perfect adhesion across the whole surface and easy release when plate cools off a bit. I also like that it's almost smooth - with very subtle texture, and plate temp could run lower then with PEI plate - doesn't hurt to save a few buck on electricity. Have not tried printing PETG with it yet, but that worked very well with PEI.

This build plate makes a world of difference. I've had no problems with sticking with any types of filaments. It is a thick plates, very durable, you can tell it looks like a quality plate but you are paying a good price for it, it fits perfectly on the x1c.

Plate arrived very uneven and won’t lay flat, even on my glass table. I’ve tried multiple petg and pla filaments (all dried). The plate is way too flexible and is causing lifting at the corners (literally the whole plate is lifting away from the printer). This is with or without a brim or mouse ears and with 30, 40, 50c for PLA and 50, 60, 70 and even 75c for PETG (above the recommended range but I was determined to try everything before having to send this back). The texture itself is very nice and when and where it holds, it does so very well, but since the plate is so uneven, my p1s and a1 can’t fully compensate and I end up with wavy spots on only certain parts of the print. I’ve tried printing the exact same things and with the same settings on my stock Bambu textured plates and they all come out perfect, and without any flexure and all have 2000+ hours on them. I’ve ran with the print enclosed, or open, I’ve ran with and without cooling, nothing makes a difference with this plate and I’m tired of wasting filament trying to chase my tail with it. I want to like this plate, the adhesion is great, even once cooled. I watched tons of reviews and everyone said this is the one to buy, so maybe I just got a dud? I’ve emailed the company and am waiting to hear back, so I will post any updates I receive.

Love this build plate. Adhesion is amazing! However, be cautious. Had a print stick so well on my first day of using it, that the build plate cover ripped right off. Stuck a bit to well. Would happily buy another.

So I got this after having a lot of bed adhesion issues. I was a bit disappointed that I was still having bed adhesion issues with this plate. I still had to run my bed temp at 50C to see any slight improvement, which wasn't optimal for a coolplate. I sort of chocked it up to just environmental or that this was as good bed adhesion as I was going to get. I eventually had a mishap with the printhead that left a big dent in this plate, so I opted to get another. This time I got the YOOPAI one, and boy is that plate everything I expected this one to be. The difference is night and day. I don't have to print at 50C on that one, and the prints stick better than they've ever stuck to anything. Giving 3 stars because this build plate was not exactly dysfunctional, but it was disappointing.

Love using the Cryogrip build plates. They provide superb adhesion and rarely have any issues. Not a huge fan of them for PETG, as it has tended to stick TOO hard and removed the coating. Would have given 5 stars for this purchase, but received a returned plate. It had clearly been used before as evident from the outline of a print and the usage of the nozzle cleaning area

It is banded unable to use with my printer bambu lab p1s. So pls replace it as soon as possible

Buena placa, la tengo en otros modelos y funciona excelente no se despega nada

Muy buen producto