Electric Guitar String Retainers Tree Standard Roller String Guides Pack of 2pcs (Black)

Put this on an older Fender HSS Plus top (2017-18) Strat. The supplied screws were longer and thinner than the ones on it, which was a wing type tree, so I reused the original screw. The last thing you want is to break off a screw in the headstock installing this. This exactly matches the string tree used on a 1990 American strat which is what I was looking for. Like the older one, it has a dimple underneath, so you have to drill a small hole above the original installation hole. I located the hole by carefully tightening down the tree just enough to indent where the hole needs to go. I then by hand, using my fingers, spun a .059 drill bit to make a shallow impression. The dimple hole is smaller than the original screw hole. It stops the tree base from spinning with any unequal string tension. It is not a roller tree, Ok, a little anal, I know!

Easy and inexpensive upgrade for the crappy part that came on my Squier strat.

These are typical off brand retainers, but they work very well, bo burrs or nicks to break strings, and they install easily.

They're good. I cut the little nubs off the bottoms that are supposed to keep them straight so they wouldn't make marks in the wood. They work fine without them and they're easier to install. I like this design better than the stock ones in a Strat or Tele.

Great looking and functional.

I bought these to replace the factor squire/fender trees on my Squire Mustang. These have a small dimple on them, so requires a small modification if you are swapping yours out. *I simply slacked the strings and moved them to the side *Removed the existing tree *Placed the dimple of the new tree in the existing hole *Used an Awl to mark the center of the hole for the existing tree (see photos) *Used a 1/16th drill bit to ever-so-slightly expand the hole *Place the string tree dimple in the new hole, and use the provided screw to fasten the new tree in the existing string tree hole. The two holes will be very close together, so just be mindful if you use an Awl not to "merge" the tops of the two holes. The hole needed for the dimple is very small - I started with the awl and checked the dimple multiple times and gradually increased the size. Just be patient. Overall took me about 35 minutes and taking my time. Could do it in 5 minutes knowing the process. Final Thoughts: Would absolutely buy again, and will recommend to friends and offer to install on theirs. ***The description calls this a "...Roller String Guide", but does not move in any way. These are static and have no rotation or "rolling". For this price, it shouldn't, but that can be misleading.

I purchased these string trees to fit in a neck that I was doing a hardware swap on from chrome to gold. The quality and fit is perfect! The finish matches nicely with the rest of the gold accents. You'd never know it wasn't OEM!

Buen producto

Screws are not the right size for a Fender Stratocaster with existing holes.

These do not roll defective or false advertising. Even Tried grabbing it with pliers to rotate, won't budge.