GM Genuine Parts 88967320 Automatic Transmission Range Select Lever Kit with Both Cables

Product appears to be an actual GM product. The box was mostly plain, with a the GM holographic sticker. The shift cable fit my 2004 suburban z71 perfectly. The hardest part was getting the cable out from under the dash. That took probably an hour because of the way it was wrapped in there. It did come with an instruction sheet, that was a photocopy and nearly impossible to read. Youtube is your friend. I did not need any additional parts or pieces to install this. Tip. Before you lock the cables together, adjust the shift linkage. You do this by putting the key to run or starting the truck, put the shifter all the way down to 1st gear, then back to park. turn off the vehicle and lock the cables in place.

Cable installed and works as it should on a 2004 Suburban. I will update this review if it fails.

Perfect fit, adjustment was simple .don't buy aftermarket cheap junk, they don't fit or adjustment like oem.

This is a good OE quality Delco cable! I cannot fault the cable assembly at all! But to my dismay and disappointment,the cable does not ship with the metal retaining clips(which I would consider crucial to doing this job)that lock the cable into brackets at the steering column and transmission.They are just a staple shaped type of retainer that you push into the cable end after positioning it in the bracket.Which was the problem in my case-somehow the clip at the transmission end parted ways with my 2003 Suburban and the plastic tab on the cable end broke off,resulting in inability to select Park or Reverse.Especially fun when you need your vehicle for work and you've just had a few days of snow with bitter cold.The workaround?Disconnect cable from steering column shift selector and operate manually.Good times. Cheers to Amazon,though!I initiated a return&replacement after explaining my dilemma and they said that possibly I had received one with missing parts.The replacement came with no clips :( As for the install-not technically difficult,but there are some slightly exasperating fiddly maneuvers to get the cable positioned around the steering column.Maybe I was just mad because the the clips were missing. So out came the zip ties and I re-connected the old cable to get it functioning again.I still have to source the clips,but this project is on hold till warmer weather...

very difficult to install. takes a lot of contorting to get it hooked up completely. It may be easier if you have a lift which I do not.

So far this shift cable is great, took a minute to install mainly thanks to me making a mountain out of a mole hill. But it works perfectly. Installed in an 04 Z71 Tahoe. Make sure to lay it next to the old so you can have it set close to the OEM spec.

Replacement shifter cable. Factory fit a finish with no issues. Wish there were installation instructions, due to tricky install, but overall I am satisfied.

Took a day longer to get than it said I needed it sooner so I had to pay double at the parts store so I could use my Yukon but I took this item so I would have a spare not a great design from the factory very hard to adjust, the cost for the ac delco part was less than half that car quest charged but I did get the part three days earlier than amazon could get it to me!

Instalado en tahoe 2000

You have to join the cables together.

Muy buena calidad, excelente precio

this fits correct

fit like a glove