PPD Inkjet Premium Iron-On Dark T Shirt Transfer Paper Pack of 10

Decided this year that I wanted a personalised t-shirt for when I go fishing, but with it likely getting dirty and smelly very quickly didn't fancy paying loads for it to only be worn maybe a handful of times, decided to give this a whirl along with a £2.50 no brand t-shirt. Followed the instructions and it turned out great. All in all cost about £3.20 for a personalised t-shirt which looks about £30 worth if you compare the design to others on the market. Definitely worth a go, just follow the instructions and you can't go wrong

After lots of research I was left with the decision, do I save money and buy more of another product with less reviews and so on? Or do I stick to what has been tried and tested and sits a top of the Amazon suggested products page? I opted for the better known product, 10 sheets of both light and dark transfer paper (separately bought). The thing we have found about T-shirt printing or transfers is that there’s a lot of trail and error and although you’re paying a substantial amount in transfer paper, we ultimately noticed that having a reliable product to use whilst also finding what worked best for us was the better decision. The cost of these sheets compared to their realisability and end product was much more cost effective than say our journey with printers and print format. Looking back, I’m very glad we chose a product that didn’t add to our headaches of bringing all the components together to get a good final product. We will definitely be buying again.

Easy to use and good results. Item started to peel on first wash though even on low heat

I was a bit nervous with this product reading some of the reviews but I just finished making 10 t-shirts without any problem. The silicon sheet was fine and didn't get damaged at all. The only annoying thing is that the film that needs to be peeled off at the start can be a bit pesky to peel off. I tried both the ironing board and the hard surface (table covered with another t-shirt) and both worked although the table option seemed to work a bit better.

I recently used the PPD Inkjet Premium T-Shirt Transfer Paper A4 for Dark Fabric (10 sheets) and it worked really well for my custom shirt projects. The sheets produced vibrant, bold prints that transferred cleanly onto dark fabrics without fading or losing detail. They’re easy to use with a home inkjet printer, and the results look much more professional than generic iron-on alternatives. Application was straightforward and the transfer adhered nicely to the fabric without peeling at the edges. The paper handled washes well too, with the designs staying sharp and durable after several cycles. Overall, this transfer paper is a reliable choice if you’re making personalised tees or gifts and want standout results on dark garments.

The first transfers were okay, but got more and more problems once the parchment to use for ironing on got well used. Colours stuck to the parchment en parchment stuck to the photo.

If you follow the instructions this will give excellent professional results. Slightly difficult to remove the backing, you have to peel off the image from the backing rather than the other way round, but as long as you're careful that's fine.Not washed the garments yet, so can't comment on the longevity of the prints, but on first impression it was excellent.

This is one of the worst products that I have ever used. I was very surprised as their light shirts transfer paper works so well. This was terrible right from the start, I followed the instructions to the letter, as I started ironing on the picture, I saw this strange stringy white stuff coming off from underneath. After the three minutes of an even pressure going over the whole image, it didn't stick, in fact the whole thing peeled right off, which I expected whilst ironing due to the look of the corners whilst I was ironing. The white stuff that was hanging off, in small stringy tangles around the edges of the image, which is where the white stuff had come from, it had come off from the sheet. Thinking that it was a mistake on my part, I followed everything, to the letter, again! Same issue, so what if it just needs longer. Bare in mind that the top is already ruined with white stains where the strands had come off the image, where now small white dots that had ironed into the top, AND got stuck to the iron (the iron part I didn't discover till later). After trying for a few extra minutes, the transfer material was still stringing off in small pieces. THIS is the moment that I stop and try to pull it off, as the instructions say. Again I've done this successfully previously with their light shirt transfer papers. The transfer material had hold of the top and the paper it was attached to, clinging on for dear life. I decided to let it cool and see if it'll come off, unlike its temperature, it had not cooled in its determination to hold on. I then proceed to the sink and lukewarm water, over two hours I managed to get The backing paper off the shirt. Alas the image was not on the shirt, bar a small section, just the ink colours without the white background. EVEN then like I said it was only a part of the image, it looked HORRIBLE. It was awful and I've never used such a terrible product. I highly advise that you do not get this product, it does not work, and it will ruin your top. A complete waste of money.

The transfer sheets work great, printed in great quality, simple to iron on. A little hard to get the backing started when peeling off but otherwise very impressive. Would definitely buy again.

Easy to use with great results. I had a slight issue of the edge melting but I think The iron was too hot. Will experiment to see what are the best results. Would be good if they gave a temperature in the instructions

Het strijken moet goed volgens de gebruiksaanwijzing gebeuren.

J'ai acheté ce produit pour faire de la personnalisation de sièges auto enfant. Après avoir choisis mes images j'ai imprimé une page avec tous mes motifs via un traitement de texte. Pour l'impression, j'ai juste choisi papier ordinaire mais haute qualité d'impression. Mon conseil à ce niveau est de monter un peu le contraste et la couleur : le rendu a plus d'éclat. La découpe est le moment un peu délicat : il faut faire doucement avec de bons ciseaux. Ensuite il faut décoller le motif du papier de support : ici une fine lame (type cutter) sera quasi indispensable. J'ai posé le motif sur la surface à décorer puis la feuille anti adhésive (fournie) et un coup de fer (température max). Un mouvement régulier une dizaine de seconde et le transfert était effectué. On voit sur les photos que le transfert se fait vraiment en profondeur, dans les fibres du tissu. Le rendu est super, les bords parfaitement fixés et les petites têtes blondes sont aux anges. Prochaine étape tester sur des vêtements à personnaliser. Vu la prise dans les mailles du tissu, je pense que ça devrait bien se passer. Lavage préconisé à 30° pour une bonne tenue dans le temps. Si mon avis vous est utile, cliquez, cela fait toujours plaisir !

Bien mais ne fonctionne qu’avec des imprimantes jets d’encre