Carburetor For Yamaha Champ 100 YFM 100 ATV Quad Carb 87 88 89 90 91 Badger 80 YFM 80 85 86 87 88 Carb w/Fuel Filter Carb 92 93 94 95 96 97 98 99 00 01 80 G ATV Carb 05 06 07 08

I'm generally not a fan of knock off no name brand carburetors. they are typically more of a hassle than what they are worth. In this instance we were in a jam and needed something asap for a planned trip out of state. so I rolled the dice and chanced it. after properly adjusted the bike ran like a champ. its been two full riding seasons and we are still using it.

Worked for my Yamaha grizzly 80. Took a little adjustment to get it right but not bad right out of the box.

Installed 2 of these and both bikes fired right up and run great. Way easier than trying to fix a rusty carb. Fit was great just had to reuse the top plate for the throttle cable from the factory carbs. Great value for the money and comes with a new fuel filter.

Hooked it all up, fired up and ran great. But the float was sticking and kept dumping fuel out from the overflow. I pulled the bowl off and the float had a tab that kept rubbing on something. Swapped out float with oem cabs float and it works great! Not bad for 20 bucks. 👌🏼

Ran this carb for about 4 hours then the slide would bind up once it warmed up. Took it apart and you could clearly see the binding marks. When the slide binds up the throttle sticks, not a great thing when a kid is riding it around and the throttle sticks open.

Works like OEM. BUT, if you think the bike will run just by bolting the carb on, you’re grossly mistaken. You MUST know how to adjust it or know someone who does. It requires some fine tuning and it’s not something that just anyone can do. I think many of the bad reviews are because the buyer has no idea what they are doing. You may even need to adjust the float, thankfully my float needed no adjusting but it definitely needed tuned. They DO NOT come out of box tuned.

Just trying to get my kids 80 raptor up and running normally. First purchase was based on some reviews and looked like there has been some success on this carb so I bought and tried it but could not get it to idle normally. 2 turns out and fine tune from there left it surging then if I didn't give it some gas it would just die. Didn't take long to buy another one, so after install I did manage to get it to idle but the air fuel mixture screw did nothing so of course i couldn't get rid of the bogging. Going to try it one last time then if it doesn't work I'll have to head for the dealer and grab an original.

Bought this to replace the o.e.m carburetor on my 80cc raptor. Bolted right up and had to do very little adjusting to to air fuel mixture. Runs great wouldn't no the difference between it and o.e.m inless someone told you. Highly recommended for raptor 80cc