Decorative 3D Wall Panels in Diamond Design, 12"x12" Matt Black for Home and Office Decor (33 Pack)

This was a week-long project that took several steps to complete. My project involved more than 160 panels. The panels themselves are very sturdy PVC, and the final product is an incredibly unique accent wall that complements my entire living room. Suggestions/info: - Per the manufacture's directions, take the panels out and let them "air out" for 24 hours before installing. When installing (potentially) hundreds of these, you want to make sure they are fully acclimated/adjusted to your environment. I stacked them in alternating patterns, one by one, to provide maximum airflow. (See picture.) - My house is brand spankin' new, so I decided to put thin wood paneling on the wall instead of gluing directly to the drywall. I bought the sheets at Lowe's and had them rip them into 8'x2' panels. I was able to install them by myself, since they were super lightweight. (See pictures.) - To adhere the panels, I used Gorilla Glue Industrial Liquid Nails/Adhesion. I have no doubt the drywall would be absolutely destroyed if I ever tried to remove these panels later. It is important to glue all surfaces along the back - not just the outer edge. Use a thin line - don't let it seep outside the edge, or you'll have a mess on your hands. - I used a laser level to align the panels. It is incredibly important to find a reliable method of applying tiles straight, as every small deviation will result in a major offsets later. I began in the top right corner and worked my way down, one column at a time. I tried using super-thin tile spacers in the beginning (as you can see from one photo), but found that it was harder to keep the panels in place/straight versus just butting them up against each other with the help of a laser level. - Take your time to caulk the seems, and do it the right way. No matter how hard you try, there will be gaps, and they look much, much better when you fill the gaps with caulk properly. Take note of the pictures of the all-white wall before caulking for an example of how bad the gaps look before caulking. - FOR THE LOVE OF YOUR SANITY, PAINT THE PANELS BEFORE YOU INSTALL THEM. I cannot recommend this enough. I made the mistake of putting panels up first, THEN painting. All 160+ panels were paint by hand with latex paint, and as you guessed, you cannot use a roller to paint these panels. Additionally, if you do paint, you will need several coats, since standard latex paint will not adhere completely on the first application. My tiles took three total applications. I have never experienced such cramping in my hand after painting every odd angle of these panels. If I could do it all over again, I would have spray painted the tiles before installation, and touched up the seams after I was done. This would have saved dozens of hours, as painting took, by far, the longest time overall. - Take your time cutting panels. I used a compound miter saw and it worked wonderfully. I read in other reviews that the panels can be cut by hand with a razor blade or scissors, but I imagine this would be extremely difficult if you had to cut a bunch, as I did along the final column/bottom row. - I initially planned to use the "raised" outlet covers to blend them to the panels. But, I found that painting the wall behind the panels makes it look just fine, and there's no need to use a riser. (In fact, the risers I bought were flimsy and difficult to install - I think they would have made the final product look worse, not better). All told, this project took a significant amount of time - probably 80 man hours. But, more than half of that was painting. If you are doing a super basic pattern that doesn't require cuts, backer board, painting, etc., hanging panels could be done considerably faster. Overall, I highly recommend the product!

Check out the setup at MohawkNinja636 on YT, Twitch, and TikTok 😉 I got these to enhance my streaming setup. For the install.and adhesion I tried double sided gorilla tape at first but they didnt stay even 24 hours. I then used liquid nails which has held up for a week so far. They are fairly solid and the install is easy. They are very functional in the way they catch light and give your setup a very professional and well thought out look

These make your house look so luxury

These panels were the best choice I could’ve made for decorating my game room. They’re thin enough to put nails through for mounting, but they are still thick and good quality. The panels align well with each other, making for a seamless pattern when using them for a big area. They’re a great value for your money, considering you get more than enough to cover a decent part of your wall.

Hard to believe how affordable these are for the quality and coverage. A lot of people glue them to walls or wooden panels, but tiles can eventually slide or fall, also messy — and edges don’t line up well because of the way they were cut in the factory. I stapled them directly to the wall, then ran matte white pinstriping tape along the gutters. It’s nearly invisible, holds securely, isn’t permanent, and only leaves tiny staple holes if removed. Took a fraction of the time to install!

These white 3D wall tiles completely transformed my space with a modern, high-end look. The geometric design adds great texture and depth, and the material is lightweight but feels sturdy once installed. They have no sticky backing. You will need to install them with either glue, staples, or tape. It took about an hour with 2 people to install two accent walls of this tile. I used light-duty Arrow brand metal staples for installation, and they worked perfectly — quick, clean, and secure. I also used a level to make sure they were perfectly squared and lined up. The tiles lined up easily and look seamless once in place. A simple, affordable way to create a stunning feature wall. Highly recommend!

We had an entertainment center attached to this wall and it was great but needed an update. After taking it off the wall we needed to repair and paint. I decided to use these textured panels instead of painting. So many compliments on the wall. I love the look and so far everyone that has visited loves the look too.

Love how easy it is to install. I used double sided tape and it transformed my wall.