Canon PIXMA G6020 All-in-One Supertank Wireless (Megatank) Printer, Copier and Scan with Mobile Printing, Black, Works with Alexa

Es perfecto por lo que la necesito. Tengo una pequeña empresa y me ayuda con todos mis proyectos. Aun me falta probar una variedad más grande de papel y ver como le va con el tiempo. Es muy muy facil de instalar al contrario de lo que dice algunas revistas. Vivo en México y la instale en menos de 10 minutos.

UPDATED Jan. 2022: I've now had this Canon Pixma 4210 printer for over 18 months. It has worked well overall for my purposes. It does a nice job of printing color photos on glossy photo paper, and does it so inexpensively when compared to ink-jet printers and their relatively expensive cartridges. I also use the Pixma 4210 when I print or copy stuff with lots of color graphics. While it does NOT print on both sides (no auto-duplex), and the LCD panel is hard to read without good light (we use a small flashlight kept next to the printer), I have yet to replace ANY of the inks (tanks are still over half full after 18 months). If I need fast color laser printing with auto-duplex, I print to my HP Color LaserJet Pro M252. But it costs over $400 each time I need to replace the 4 cartridges (with HP brand), and I've done that several times in the past 5 years! The HP is NOT a bargain--costing me about $1,300 more so far for a $200 printer, way less than the Canon which cost me about $300 new and still using the original ink in the 4 megatanks. Not only is the HP a lot more expensive to use, the PHOTO quality on the M252 is poor and unacceptable. Yes, the Canon uses more paper (because it prints only on one side), but paper is way cheaper than HP laser cartridges. As for reliability, the Canon needs a little more attention occasionally. The biggest issue I've found is that if it has not been used in a while (several weeks or more), the inkjet nozzles can dry out and clog, and eventually one of the colors stops working. However, using the Canon firmware that does printhead cleaning has solved the problem each time (though sometimes it takes several iterations). I've also had that same problem with ink-jet cartridge printers in the past, where the only solution was to replace the expensive cartridges or even buy new printheads (even more expensive). The HP Color LaserJet M252 has been super reliable, but very expensive to use for that convenience and speed. I'm considering replacement of the HP with a fast, black-and-white laser printer with duplexing, even though it has grayscale graphics. -------------------------------------------------------------------------- ORIGINAL REVIEW: I have a 10+ year old HP AiO printer that is no longer supported, and it is increasingly difficult and more expensive to get cartridge replacements. I also have a very good laser printer that is fast and prints on both sides of the paper, which I use for professional writing and proofing. However, the laser color photo quality is not satisfactory for making good quality prints on glossy photo paper. I was attracted to the Canon Pixma G4210 because of the Consumer Reports review, and bought it for the better photo quality when compared with most of the other inkjets reviewed, and especially for economy of use for refilling ink tanks. The real cost of inkjets is, of course, the long-term expense of replacing ink cartridges; and replacing the plastic cartridge housings every time is wasteful. I knew that the 4210 would print on one side only, and the LCD display was hard to read in poor lighting, but this printer is for light use and occasional photo printing where quality matters, and also for copying and scanning. That it does not do auto duplex was a trade off for better photo quality and low maintenance costs. I almost cancelled my order after reading many of the Amazon negative reviews, but I am giving the G4210 a try based on the Consumer Reports review. I have a variety of devices in the wi-fi network that I print from, including MacOS, Windows 10, Linux, iOS, and iPadOS. For me, the setup went very smoothly. I followed the job-aid, and it worked as it should right out of the box. I did not have any wi-fi issues, as some reviewers report. The only thing unexpected with the default settings was that the printer turned itself off after a few hours of non-use, and was no longer connected to my wi-fi network. I used the web interface to the printer, with the serial number for the admin password, which I changed to something different. Then I changed the energy settings so that auto power off was disabled, and auto power on enabled. You must click the OK button to save the changed settings. I would agree with Consumer Reports that photo print quality is very good on glossy photo paper, and sharpness of text printed is also excellent. Speed is so-so, but that was less important to me than quality and inexpensive ink replacement. To deal with the LCD display issue I've put a cheap LED flashlight next to the printer, since the area lighting is poor where the printer sits. I have had decades of experience with many different kinds of printers. With any mechanical device, it needs to be treated properly and maintained. Otherwise, trouble will eventually occur, whether it is cars, lawn mowers, dishwashers or printers. Only time will tell if the Pixma G4210 is a good value, and I'm willing to see how it goes in the long run. If this one lasts 10+ years as has my HP8500, then it will be an even better investment. This is my first foray with a Canon, but they have been around for many years and have a good reputation for quality for their better products. The G4210 was designed for economy overall. Lack of auto duplex and poor LCD are a good trade-off in my view. Most of the time, I do print jobs from apps on my devices and just go pick up the output, seldom using the buttons and display on the printer. If I want fast auto-duplex for text and fair quality graphics, I use a laser printer for economy.

I always read reviews before making a purchase, and this printer was no exception. It had decent reviews, and I'm aware that there are always people who give one star and share their sad story about how the big prong of the plug wouldn't fit into the wall outlet, or something equally ridiculous. Rarely is it truly as awful as they make it sound, and their comments often belie user error. Thus, it is with reluctance that I rate this printer on the low end. (I've only selected five stars for visibility.) Actually, it's otherwise a nice machine if it would only work properly. One thing I don't like about the design is that the display is lacking. It has very minimal instructions if you are trying to perform functions through it, and there is no backlight, so you'd better find a flashlight if you have it in a cabinet like I do. I like the large tanks. (HP was "nickel and diming" me to death with their ink cartridge subscription.) But large ink tanks don't do me any good if it doesn't print well enough to read. I often give public presentations, so trying to read the blurry print while I'm addressing an audience is not a good look. In the end, when I purchase a printer, it's so that I can have a reasonably clean printout, regardless of whether it's text or a picture. This printer worked quite well for the first year. I don't print very often, so when I need something printed, I can safely say that I haven't overused the device. It should work pretty much perfectly, right? I'm still working on the beginning of my first ink tankful, and haven't yet printed a whole ream of paper in all the time I've had it. Lately, the text printouts have been "jittered" and blurry. Not everywhere. Just as the page comes out, there are straight lines that are jagged, and lines of text that blur. I've run through the maintenance routines. ALL the maintenance routines. To no avail. Alas, my next efforts will be to go online, try to talk with a company operative, and then when I finally get someone on the phone, I'm sure that they will have a script that they will insist we go through that repeats everything I've already done. Then what? Do I still have a warranty? No. What big deal do I have to go through and what is it going to cost me in time and money? I really don't want to go down this road. I just feel like dropping it in the dumpster and finding out how good a brother printer is. Anyway. I've attached pictures. The first one is what the black and white SHOULD look like. The second one is what I'm ACTUALLY getting. (Hey. At least the scanner works great!) [NOTE: Amazon placed the pictures in the order opposite to my submission and description.] The next two are for color and pictures. It's all garbage. Well, at least you can see why I would have rated it two stars. I'm bothering to write this up, not out of a desire to "get back" at a company that I feel has ripped me off (which I do). Rather, I'm looking out for your interest. Please don't make this a waste of time for me and a waste of money for you. Take the time to read a few of the two-star reviews. I have personally related to most of them. Seriously. Move on.

The instructions on how to put the two ink cartridges did not cover all info on installation problems. Tech support was so so. First person was not as helpful as the second one. I figured it out after awhile and sent them an explanation of what Idid just in case anyone else had the same problem.

I just received a PIXMA G6020 from Amazon and wanted to provide some information given the disparity of reviews I saw prior to making the purchase. This review is only about the initial process of setting up and printer performance. Set up Some of the reviews mentioned difficulty in setting up wirelessly, and I thought I might provide some details for potential consumers. First, Canon still provides a hard copy step-by-step instruction booklet which is helpful. Within the booklet are scan codes that can be followed or a web address to see a sequence of photographs that walk you through the setup process. I used this because some of the pictures in the manual were difficult to discern, but the photographs were very clear. Once the machine is set up and plugged in (no cables attached to any computers), Canon provides a web address which is very clean and easy to negotiate. A clearly marked “set up” button takes you to a page where you select the kind of machine you have. You’re supposed to enter some letters, but none of these are PIXMA. That was a bit confusing, but scrolling down you can see a G020 button and clicking on that opens up a window with a start button and a picture of the printer so there can be no confusion. Clicking on the start button begins the process of setting up from the pictures I mentioned above to downloading the drivers and joining the printer to the wireless network available in your home. The process went very smoothly with little input from me until an error message appeared which was associated with my Internet security system blocking the printer from the network. Importantly, there is a window from Canon during the setup process that warns you of this before it happened. As a quick aside, the hard copy manual was clearly adjusted to include anticipated problems people might have because there are several places where warnings about problems (both Windows and Mac) occur with suggested resolutions. I was impressed by that because often a set of documents are prepared and released without any consideration of problems consumers might have on their different systems. Anyhow, clearing the security issue, the download completed, and the printer was available on my computer already set up as the default. The wireless connection to my home network worked great. As I headed downstairs away from the printer and our router to our second computer, the process went equally well and again the printer was available for function on the second machine. Scanning Canon provides “IJ Scan Utility” as a rudimentary scanning software that allows you to direct the printer to scan documents or photographs. If you are scanning documents, multiple sequential scans are permitted (no document feeder, so you have to change the scanned pages yourself). These are combined into the same PDF when you save them. Both documents and images are by default loaded into a default Windows temporary documents folder which gratefully pops open when you are done. Otherwise, you would have no idea where your documents or images went. That’s a bit of a drawback because I could not find a way to change the default download folder, but since it opens, a quick drag-and-drop remedies the situation. Printing and copying I agree with the other reviewers that the panel on the printer should’ve been backlit because it’s hard to read. Printing quality is good and fast, although I did not try any pictures. The copying function is simple as well. Just put the document on the scanner and click either the “black” or “color” button on the panel of the printer itself to produce a copy of the document. Bottom line At least initially, this machine was exactly as advertised. It was straightforward and easy to set up, contained warnings and resolutions where they expected you might have trouble and then produced high quality printed documents. Some may not like that you have to interact with Canon via the web to get everything set up wirelessly, but to me it seemed like a really good way to ensure the process went smoothly which was the case for me. Hope this helps everyone if you’ve been on the fence about what printer to buy given the many bad reviews that this and less expensive printers have. So far, this one completely met my expectations. If the machine fails in the future, I will update the review.