dent removal tool

If you have an expensive car or a complex dent and you want it to look perfect. Hire a PDR professional, it is definitely an acquired skill. If you are like me and have an older car but still want it to look nice and enjoy DIY projects this is a outstanding kit. It has everything you need with the exception of a battery for the light which the seller points out. I pulled multiple small dents from door and quarter panel from a black car. They were removed over 80%, so you would not notice them unless I pointed them out to you while looking at the correct angle. Which was totally acceptable for me. The key is to make sure to clean and remove any wax/coatings/dirt from the paint, before applying the glue. It going to take many pulls to step by step reshape the metal outwards. Be patient, pay attention to the amount of flex of the actual sheet metal. Different areas (middle of a door lots of flex) and wheel well (very little flex) will require different techniques and strengths. I used a combo of the slide hammer and slow puller depending on application. The small body hammer was excellent as well, nothing fancy but got the job done. The different size and shape pull tabs were extremely helpful. I didn't use the provided glue gun, I used my cordless one instead. I was quoted $450 to pull all the dents from my car. If it was a newer and very nice car, I might have done that. But it wasn't worth to me on my older car. For the $70 on this kit, I am happy with the results. Also, can use it on other potential cars in the future. Just keep in mind, go slow its going to take several pulls and tapping. But the patience will pay off. Don't expect perfection especially on a dark car. Overall a great kit DIY kit.

The kit was good but didn’t completely take any dents out. It definitely helped and it’s a great alternative instead of going and getting your car forced but it may not permanently remove your dent (depends how bad it is). Good value and it was pretty easy to use.

Some awesome tools, I bought some extra glue because the ones that come in this kit are... not the best. At first I couldn't get it because of the glue kept coming off, but then when I used my separate glue, it started working. This kit doesn't come with good instructions. So if you're new like me watch a video, let the glue cool down for a long while, in my case I had to wait about 45 minutes in the heat and 15 minutes when it was cooler. Also you have to wait until the glue gun heats up otherwise it won't adhere. You can see from my picture that the bridge dent puller uses plastic and it broke. I was almost done with my repair too, I think I'm going to have to return the kit. I was very happy when it started pulling out my dent, but very disappointed when it broke. Update they sent me a replacement puller with metal parts.

The kit came with everything pictured and the glue gun works with the sticks.. but it didn't pull out my fridge dent at all. -_- Made in China

With only 200 miles on the odometer of a new car, some careless person did a double-tap on a rear door with their grocery cart. Two small dings and scratched paint. A shop gave an estimate of almost $1,500 and about a week to get repairs done. I already had 2 open claims related to a house fire so intended to pay cash for the door dings. But I thought, what if I pay to fix the door and then weeks later the car is damaged again? So, I ordered this tool to see what I could do on my own. Happy to say, I was about to reduce the ding size by 95%, and then I bought a kit with matching paint and clear-coat for the scratch. The ding was too ‘sharp’ to pull out completely, but reduced to a 1/4”, barely depressed area. It’s not perfect, but hardly noticeable. Now I won’t stress over keeping the car ‘perfect’. The kit is easy to use, well worth the cost, effort and time. Might come in handy for vehicles of other family, or friends. Recommended.

Disclaimer: its Nov 30th so yeah the car was cold. I pulled it in to the garage and cleaned the spot off. The adhesive dries quickly and no matter how long i let it set, it would pop off the adhesive and the dent remained. There was two very small dents. I even heated it up the car and still the same results. Second part, trying to get the adhesive off. Damn that was a pain. I ended up have to use my wife's Dyson hair dryer to heat it up at max settings and then use a combination of rubbing alcohol and the scrapper. After much elbow grease and waisted time, I finally was able to get ot all off to be left with the same two spots still there laughing at me. I was very hopeful but was let down dramatically.

Why did you pick this product vs others?: I picked this product because it came with a large glue gun and black and clear glue sticks. Also it has a better price and the kit comes with different size options for the dents. So it can pull out the tiny dings in my car

Once you start putting pressure on the tool, the glue separates from the puller tab. The tabs seem to be made from a slick plastic that does not allow the hot glue to properly bond to it. Did not work, used the proper glue at 75 degrees.

Package as described haven't had opportunity to use yet

I was really pleased with this kit overall everything arrived exactly as listed and in perfect condition. All the components worked just as expected, and the quality was surprisingly good for the price. It made the whole process simple and effective, and I got great results in the end. The only downside was that it turned out to be a bit messy to use, so I’d recommend laying down some extra protection or working in an easy-to-clean area. Still, I’d definitely buy it again for the value and performance.

Quality is good. Today, receive a replacement for the damaged line board mirror. If I can give 6 stars I will do it.

Fonctionne très bien et facile d'utilisation les bosses disparaissent rapidement

Absolute junk. Pieces broke easily. I returned the product