eXtremeRate Replacement D-pad R1 L1 R2 L2 Triggers Touchpad Action Home Share Options Buttons for p s 4 Controller, Black Full Set Buttons Repair Kits for p s 4 Slim Pro CUH-ZCT2 Controller

I followed instructions provided by ifixit and ordered the proper controller parts that matched my controllers id. That one is important. I broke my R2 button a while back and I didn't want to buy a whole new controller considering the price and current economy. So I decided to do it myself and purchase these. The triggers and bumpers work perfectly. They are labeled unlike the other buttons so I only installed the triggers, bumpers, and dpad. I like the PlayStation aesthetic and did not want to part with my cross, circle, square, triangle, and PlayStation button. I will say, my start and share buttons did not look removable. They looked like they were part of the frame. I did not read the instruction guide recommended by the seller but that's because I wasn't looking to replace anymore than the trippers and bumpers. I wasn't initially planning on installing the dpad, but I decided to take the risk and dismantle further, and it was a success for me. Just as well, the touchpad replacement looked sketchy at best. Again, the guide probably explains why it didn't come with the sensors or anything. I was simply skeptical about it working in the first place considering the following factors. The stock ps4 touchpad isn't the greatest. On console, it functions fine but I'm not convinced it functions well because of all the sensing boundaries and filters set by the games/console. It's also a little thinner and more polished than the touchpad provided by this seller. So considering the touch wasn't great in the first place, the touchpad from this seller was thicker and more coarse, and the bad reviews about the touchpad, I didn't even want to bother with it so I never used it. I wouldn't be surprised if it is as shoddy as people mention. To be fair, it can be a pain to make custom buttons, when the button you are customizing has hardware and software tied to it. All-in-all, my experience was excellent and I got what I wanted from this.

Always wanted buttons like this, and it just looked amazing

pretty good quality but has a slippery finish

Worked and looked great I decided to keep some out to and keep a different definition on my color scheme but are wood and l1 and l2 buttons had to take a little bit of the gold plating off to get the button not to stick otherwise they work great!

Look great be careful if your gonna swap the share and option buttons I cut where was recommended and needed to cut deeper because the share button jammed when shell was assembled remember you can always cut more you not less I had to clip it down further 3 times before it was perfect also the touchpad is a process take it slow and use a hair dryer at low heat to warm up the adhesive

Described & looks exactly like the picture. The quality is good and durable.

The buttons were easy enough to install. Taking apart the controller was the hard part. The front buttons for fine for my model JDM-001 1st generation controller. However, the TouchPad needed modification to fit as the sides were too tall to fit the plastic cover that is supposed to be inside on top of the little electronic board. So I cut the plastic cover the make it more narrow. The L2 and R2 buttons don't fit at all. I might be able to sand them down to fit, I don't know yet. I don't know yet about R1 L1 buttons, they seem to fit, but haven't been able to fully close up the controller yet until I get fitting R2, L2 buttons. I bought R2, L2 buttons that actually fit 1st gen. I would say, unless you need button replacements that actually fit the models described. Don't bother as it is just cheap plastic that is cheaply painted, not actual chrome metal. They look nice, but you can just buy chrome spray paint and DIY or use nail polish.

Looks sickkk

Ass you can see

Li ho acquistati per sostituire i tasti del mio controller che erano rovinati e volevo dargli un tocco diverso… facili da montare se avete un po’ di dimestichezza con lo smontaggio del controller ma in caso ci sono molti tutorial su YouTube

Per essere un prodotto commerciale vanno benissimo, le levetta dopo qualche tempo di utilizzo iniziano scolorirsi

Its not amazing quality but I dont know why you'd expect that. Its great for the price

Nachdem ich meinen PS4-Controller einer intensiven Nutzung unterzogen hatte, war es an der Zeit für ein Upgrade. Das Ersatz Knöpfe Set von eXtremeRate erwies sich als genau das, was ich brauchte, um meinem Controller neues Leben einzuhauchen. Die Kompatibilität mit meinem PS4-Modell CUH-ZCT2 war perfekt, und der Einbau verlief dank des mitgelieferten Werkzeugs problemlos. Die matte Oberfläche der DIY-Tasten fühlte sich angenehm an und verlieh meinem Controller einen individuellen Look. Die Vielfalt der lila Farbtöne verleiht dem Gesamtbild eine persönliche Note. Die Passform der Tasten war ausgezeichnet, ohne jegliches Knarzen oder Spiel während des Spiels. Die Funktionalität entsprach der der Original-Knöpfe, und die Haptik war ebenso zufriedenstellend. Die mitgelieferte Montageanleitung auf YouTube ("Extremerate buttons for ps4" oder "x6bgOljU-rA") war hilfreich, vor allem für diejenigen, die zum ersten Mal solch eine Modifikation vornehmen. Der Controller muss geöffnet werden, und das erfordert etwas Fingerspitzengefühl, aber mit dem beiliegenden Werkzeug war es machbar. Leider gibt es zwei Punkte, die ich als negativ bewerten muss. Erstens fehlten Stick und Controller in dem Lieferumfang, was für mich unerwartet war. Zweitens dauerte die Lieferung länger als erwartet, was zu einer Verzögerung bei der geplanten Controller-Upgrade-Session führte. Insgesamt bin ich jedoch mit dem Ersatz Knöpfe Set von eXtremeRate zufrieden. Es hat meinen Controller aufgewertet und ihm einen individuellen Touch verliehen. Wenn Sie nach einer kostengünstigen Möglichkeit suchen, Ihren PS4-Controller zu personalisieren, ist dieses Set definitiv eine Überlegung wert.