Color Enhancer Sealer for All-Natural Stone and Pavers. Marble, Travertine, Limestone, Granite, Slate, Concrete, Grout, Brick, Block. (1 Gallon)

This amazing little product took my tiles, and I just installed on my backsplash in my kitchen from looking like a very chalky pale color to bringing out its natural array of Earth tones and took the chalkiness away. I only had a very small area to do so. I just brought bought the small sample size It worked fantastically, and it was exactly the amount that I needed. In the photo, the small piece of tile in the front is a extra piece i had left over that has not been sealed.You can see that its color is a lot paler than the color of the tile around it. The directions were easy to read and basically I painted the sealer on I did two coats.And the little bottle that I bought was perfect for covering the thirteen square feet that I had. I have just completed the backsplash, so I cannot say long term.How things will go?But for the time being, everything looks amazing.And I am very happy I believe this product needs to be reapplied occasionally.So I will end up buying the larger one in the future, but for the time being.This was what I needed, and it was perfect.Great value great product!

I used this on black slate flooring that was turning white. After a mild power wash and stripping the previous sealer, I applied this product and it worked great. The white is gone and the slate looks terrific. The black color is back. It’s rained a few times since and no white has returned, so the seal is effective and durable. It was easy to apply and really no smell I could detect. I’d highly recommend this product.

I had doubts that any product said to enhance the color of stone would have the natural, beautiful effect I was looking for. Going with the good reviews and q&a for this product, I purchased it. When I selected the stones for my hearth 12 years ago they were situated outdoors in a pile on a rainy day, and I loved their rich, earthy colors and textures, foolishly not realizing that the rich colors would not look so rich when the stones dried. And sure enough, when the hearth was installed, the now dry mostly-grey stones blended in with the grey mortar, and I lived with this very disappointing hearth (which was supposed to be the "heart" of my home) all these years. Rather than tear out the stones a few months ago, I decided to give this color enhancer a try figuring it was a small investment to make before going with a complete rebuild of the hearth. I'm so glad I did! What an amazing difference it made, bringing out all the natural colors of the stone as I had seen them on that rainy day, yet not adding any fake sheen. In the attached photo, stones on the right side of the stovepipe have been "painted" with the Color Enhancer. Stones on the left side of the pipe are not enhanced at this point. You can see the rich brown and red tones that have emerged on the right side. This product is extremely easy to use, goes on with a paintbrush...I used a finer brush to delineate the outline better. Color Enhancer Sealer is clear and does have a slight smell. For the ease of use and the low price, I find this to be a fantastic product that I highly recommend to anyone who is looking to give new life to what appear to be dull stones. It will bring out the true inner beauty of stone!

I purchased this product when I noticed that after using my conditioner after cleaning, the floor (natural slate) seemed to dull out within a day. In the past, after cleaning/conditioning it would stay bright for weeks. Realizing that I had not sealed my slate floors since I installed them almost 20 years ago, I guess they were due. However, the conditioner does put a form of sealer on the stone - but just not a 'permanent sealer' - as this product is. If you are also using a conditioner and then use this product for a more permanent sealer, please note that unlike the conditioner, which you can walk on as soon as it dries (20 minutes or so), this is a true sealer and took over 24 hours before it was totally dry. It may leave footprints and feel tacky if you walk on it sooner. Considering the cost and not seeing much difference after it was done (see before and after photos) I was happy for that - because I do remember when I originally sealed the floor we could not walk on it for quite some time, and it looked beautiful for years. The 'before' photo was taken after a very thorough cleaning (hand scrubbing the grout, etc), hence, the difference is minimal. Look at the front tiles in the 'after' photo and you should be able to see where I stopped applying the sealer for the day. It is hard to determine from the photos, but it does have a nice slightly 'wet look glow' to it - compared to the unsealed stone. It has been several weeks since I have done this part of the floor and I can say it is retaining its glow very well. I held off from continuing with the rest of the floor only because of some of the reviews that stated that the sealer actually put a haze on the stone (!!) after a week. So I held off to be sure that would not be the case. It has been several weeks and that did not occur. These types of sealers appear to be very sensitive as to what it is applied to the floor (i.e., sealers or other products) before applying this product. I believe that may be why some reviewers may have experienced the haze. I was happy that the product did not react with the conditioner that I use about 4-5 times a year. I used foam brushes to apply the product and that worked very well. The only issue that I had not anticipated is that you must lightly wipe off the residue about 10 minutes after application (I used new microfiber cloths). Since you only have so much working room, I found it difficult when applying since I knew I would need to be able to reach the area 10 minutes later for wiping. That, and you must not let the sealer dry before wiping off the excess made the work flow limiting and took several hours to do this small room (about 6x6). The good news is that although I bought the gallon container based on the coverage, I thought the product went a long way so I'm not worried about running out. Overall, I'm happy that my floors look like new again and I suspect keeping it clean will be easier for quite a few years.

I used this product on my covered slate patio. It looked great after applying, other than being slick to walk on. However, the color enhancement and protection wore off after rinsing the floor with water in the spring. The significant issue is that there were cloudy, white patches on the slate. I've used a pressure washer and various commercial stone cleaners to remove the milky look, but I couldn't get rid of it. I asked a professional stone mason to fix it, and he said that it's permanent - I can't do anything about it; the milky look is now part of the stone. The product may work on other types of stone, but don't use on natural slate.

This is the perfect product to restore color and as a primer sealer on my outdoor Spanish terracotta floor tiles. I used 2 coats. Easy to apply using a spray bottle pump and spread with a cloth covered swiffer mop head. Doesn’t turn white or cloudy like other brands.

There is not 2.5 start review to make it 50% so I gave 3 start as it looked nice for 2 days. As can be seen in the pictures, it changes and enhances the stone color after application; I am not sure how long it will last as some color started diminishing but may be its the nature of that that stone; only time will tell. Note: I will suggest NOT to use spray pump or gun. You will waste lot of liquid, moreover it will splash everywhere. Try to avoid cement, only apply on the stone with a brush. That way it will look natural and cement will not suck all the liquid. Handle it carefully without spill or body contact. As the product suggests, prep work is imp. Make sure to clean stone with mild soap water, let it dry and then apply.

Works wonders brings out the beauty of the stone recommended highly