(6-Pack) Apple Watch 38mm Screen Protector iWatch Series 3 2 1 Screen Protector [Flexible Clear Film] Case Friendly Accessories

Read the directions for applying the shield. Watch application videos. Be patient when applying it. If you do that, the application is really easy. I used a cup of water with a drop or two of dish washing soap to moisten my hands and dip the shield instead of using a spray bottle. Why go to all the trouble to load a spray bottle? And another thing is that you're not adding a bunch of bubbles by dispensing the soapy water through a sprayer. I think that was an excellent recommendation that I haven't read in the directions on any other products. If you don't add a lot of soapy bubbles, you don't have to get rid of them. I didn't have any issues with bubbles by using this method. Gently smooth the shield down with the small card included. Do not press down the edges at this point. Then wait. Wait about 15 minutes BEFORE smoothing down the edges. By doing that, you're allowing the shield to dry and stick to the watch face. The edges also become stickier as they dry. Gently smooth the edges down one at a time. Then I held it firmly in my hand to give all the edges a moment to stick. Then WAIT! Leave it alone. It's best to let it sit overnight before wearing it, but give it at least three hours. Mine has been on over a week and has no bubbles nor any sign of lifting at the edges. It's doing a great job of protecting my watch face and edges. When it shows too much wear, I'll apply a new one. After all they give you six. But I've never had to replace my iPhone and iPad films, so who's to say? As an aside, I've used one glass shield protector on a device. Drop a device once or twice and those shields easily crack. So I knew I didn't want that for my watch, and my watch has curved edges. I've always kept HD protective films on my iPhones and iPads because they do an awesome job of protecting the glass. I've never had a shattered screen when using a protective film, and I drop my poor iPhone at least one a day. So far, so good. I'm pleased and have what I want.

I am not yet prepared to give a 5 star rating as I've just installed it and don't know yet how it will last. However, despite somewhat intimidating instructions (I almost tossed this item to buy a different variety but am glad I gave it a try first - do watch the recommended video, it does help), the shield was quite easy to install. NOTE: you will need to plan on about 15 minutes total as you will need to keep testing the edges until they begin to adhere without lifting the main body of the shield. At that point I applied pressure to the entire watch face with the palm of my hand. (The palm has sufficient 'give' to mold around the edges while concurrently applying appropriate pressure overall to ensure smooth, complete adhesion.) The end result was a clear, virtually invisible application. I don't know how it would work with something as large as a phone, but for a watch, this form of 'wet' installation is very doable. I am pleased thus far. May 2018: Installation is actually easy - but you MUST watch the video and have a bit of patience, people! I had absolutely no problem getting the edges to stay down around the curved edge and they didn't begin to peel up until many months later. No bubbles or distortion, either. (I bought these in October and it's now May and I'm just changing out the one I originally applied. I probably should have replaced it a bit sooner but didn't get around to it until now. I moved and can't locate my remaining screen protectors so I've had to order more - I bought this same brand again.) I've now bumped my review up to 5 stars.

I gave up trying to find anywhere to install the Zagg glass protection, and after reading the reviews.. probably a good bullet to miss. These screen protectors are super tricky to install. The good news is- follow the directions to the Youtube installation guide. While I have a bad habit of never reading instructions.. the frustration level trying on my own was a fail. The guide was actually brilliant and worked the first time. I'm only using the first of the 6. The cover is durable and visually not ugly. The corners are starting to show a bit of wear, but not out of the ordinary. I have 5 more to replace it once it becomes necessary. This is a fine, sturdy product. It protects the watch face- which is what it is supposed to do. I have zero complaints.. but do watch the installation video. It will save you some angst.

Works perfect!! Protects my watch face from so many bumps and scratches. As you can see, there’s some scuffs on the face which would have been scratches or worse, cracks from bumping it. It was a little tedious installing it but it’s worth the protection it provides. I was using a whole bumper case that covered the sides and face all in one and it got way too foggy from sweating at the gym and also the touch screen wasn’t as sensitive with it on, so I decided to try one of these and I’m happy with it so far. I’ve had it on my watch since November and it’s now February. It’s about time to replace it though, because I think one of the corners got caught on something and lifted a little so there’s a little bit of lint stuck under that one corner. But it came with 6 of them so no worries there. Even after the corner lifted a little, it still stuck back down to the watch face and is continuing to cover the face. Also, the edges lay down smooth as long as you install it properly per the instructions! FOLLOW THE INSTRUCTIONS! I’ve bumped my watch so many times and I always check for the damages, and so far it’s still in perfect shape. I will buy these again if I ever run out.

I was so ready to blast this product and then I realized that i'm just dumb! Thank god it comes with six screen protectors. I just opened the package and attempted to install it without reading anything. I was like what the H*&L is wrong with this crappy protector! Then I read the instructions. After wasting three of the screen protectors, I finally got it installed properly and it is absolutely amazing. Cant even tell its there and if you have any issues, just rip it off and put another one on. Offers the utmost protection and clarity when done properly. Whatever material it is made of works very well in its capacity. My advice: After you READ the instructions and follow them, use a hairdryer on warm setting to start the drying process so it will start to stick on the edges. Once you get the edges gently pressed into place and they seem to be sticking, LEAVE IT ALONE for at least 3 hours. After that, you WILL NOT want to put any kind of case on that you have to squeeze into place as it will tear off the screen. After several days it will be dry enough for you to do that, but in the mean time, I suggest the case that comes with the band where the watch just snaps into the rear of the case. It keeps the edges of the screen protector covered and keeps everything looking very nice. Overall, very satisfied with this product and I will reorder again.

There are two major issues I have with this product, but they aren’t dealbreakers: 1) If I hadn’t installed a screen protector on an Apple Watch before, I probably would have needed two tries because this one isn’t as simple as other brands. Other brands include a spray solution to help with install and clear instructions on how to use it, but for this one you need to make your own solution and there are conflicting directions on how to do so (e.g. they say use a quarter teaspoon of dish soap per cup, but also one drop of dish soap per cup — which is it?) and the install sequence is fairly vague. 2) The screen cover doesn’t go on as flat as other brands that hover around $10 for 6, which is noticeable in reflections. Luckily, you can’t tell when using the watch. 3) You have to spend roughly 10-15 minutes pushing the corners down to get them to stick, and you have to make sure that’s the last step in the process or any bubbles you missed will be stuck there, and even one small bubble makes the entire cover useless because it affects the touchscreens usability. 4) THE BUBBLES. I’ve never had to deal with bubbles on a screen cover before, and they were a pain trying to get out using the little piece of plastic they give you to use. I had to use a library card instead so I had something more substantial to grip. 5) One of the covers had a deep scuff on the adhesive side, so I really only received 5. That’s a bit frustrating to me. All that said: For $5, it’s not bad (if you receive all 6 in working condition). My current cover is holding on strong, which is what matters most.

I bought this for my wife's new 38mm Series 3 as a first attempt to protect this watch. I also had just received my 44mm Series 5 so I was looking at all the options. I was favoring a case-style watch protector but couldn't find one that she wanted. I ordered a case for mine and this film for hers. So I bought this film-style product, not expecting it to be the final solution. When it arrived, I had already watched the installation video. Simply put, follow the video and you'll have results so good that you won't realize the film is there after a day or two. It takes a couple days for all the water to vent off and the end result is fantastic. My biggest concern was how well the film would shape to the corners but it's flawless. No bubbles, no lifting edges. Since I didn't have my protector yet for my larger watch (I ordered a case-style protector), I applied this same 38mm film to my watch face and it perfectly matched the rectangular shape but doesn't wrap of the edges. Better than nothing for now. But again, the film "disappeared" in a day or two, no bubbles, no defects, etc... So today the case protector arrived for my watch, I took off the existing film protector, installed the new protector and it didn't work reliably so I put another film on my watch, and I'm returning the other one. Now I'm going to buy this film for my watch size to have edge to edge protection. Don't hesitate to try this product.

Great Value because you get 6 in a pack. I got the screen saver on fairly easily, however I managed to mess it up by accidentally getting denatured alcohol on it. Apply a second one a discovered a few flaws in the protector, third one had the same issue. Got the 4th one on beautifully, very clear and nice protector, sides stick great. I contacted the company and they send me a new package of 6 because several were defective-impressed with their customer service. Application tips. Use a TINY bit of soap in water. When dipping protector in water, blow bubbles out of the way before dipping, that helped reduce the bubbles that ended up under the protector. I also use a piece of tape attached to the top of the screen protector to handle instead of my fingers. Once applied, I used the squeegee wrapped in the lens cloth. If you use the squeegee on it's own it makes dents in the protector. Once applied, I carefully removed the tape which will pull up the protector briefly, push it back down and allow to settle. With practice and patience they go on quite easily.

At first I had my doubts that this product would work. It didn’t even look like it fit the screen on my 38mm iWatch 3. Watch the instructional video before attempting install. The stiffness of the film while it’s still wet helps align it perfectly. It takes several minutes for the edges to dry up and stick properly around the curve. Trust the process and keep pressing down on the edges. It does end up sticking and wrapping around just fine as it cures. I prefer wet application any how as it leaves room for adjustment. Highly recommended! Better value than the Spigen screen protectors I got prior that lasted maybe 3-5 weeks at most.

Viene con 6 micas, al principio es un poco problemático ponerla, es muy delgada la mica; protege al reloj.

BUENA CALIDAD

Maybe a language barrier but I asked the seller of the Smart Watch for a Screen Protector and received a copy of the manual I already have. So I took a shot on these, based on the measurements to see if they would fit the 1.3 inch screen of the smart watch and I was so pleased with the results!! Following the instructions, easy to apply and goes on smoothly. I did have a couple of small bubbles but they worked themselves out the same day. Its for the Apple but fits the Orit no problem!

Works perfectly. The instructions provided made it very easy to install. I love that it covers the whole of the face.