





Desertcart purchases this item on your behalf and handles shipping, customs, and support to France.
❄️ Build Bold, Cool Hard: The Performance 1 FT Means Business
The Antec Performance 1 FT is a full-tower PC case designed for serious builders who demand superior cooling and style. Featuring dual 4mm tempered glass panels, support for up to ten 120mm fans, and compatibility with large 420mm radiators, it ensures optimal airflow and thermal performance. Its PSU shroud fan mounts provide direct cooling for high-end GPUs, while full E-ATX motherboard support and multiple USB ports make it a versatile powerhouse for gaming and professional setups.

| ASIN | B0BTRYDX4K |
| Amazon 売れ筋ランキング | パソコン・周辺機器 - 21,497位 ( パソコン・周辺機器の売れ筋ランキングを見る ) PCケース - 71位 |
| GTIN (Global Trade Identification Number) | 00761345100885 |
| UPC | 761345100885 |
| USB2.0ポート数 | 2 |
| USB3.0ポート数 | 2 |
| USBポート数 | 4 |
| おすすめ度 | 5つ星のうち4.7 681 レビュー |
| カラー | パフォーマンス1 |
| ケースタイプ | フルタワー |
| サポートするマザーボード | Extended ATX |
| ハードディスクのフォームファクター | 3.5 インチ |
| ファンの数 | 4 |
| ブランド | ANTEC |
| ブランド名 | ANTEC |
| マザーボードの互換性 | Extended ATX |
| メーカー名 | ANTEC |
| メーカー型番 | 0-761345-10088-5 |
| モデル名 | PERFORMANCE 1 FT |
| 互換デバイス | マザーボード(E-ATX、ATX、Micro-ATX、ITX)、グラフィックスカード、ストレージドライブ(3.5インチ、2.5インチ)、冷却システム。 |
| 付属品総数 | 1 |
| 保証内容 | 2年間 |
| 内部ベイの量 | 4 |
| 冷却方法 | 空冷 |
| 原産国 | 中国 |
| 品目の寸法 (D x W x H) | 52.2奥行き x 23幅 x 52.2高さ cm |
| 商品の推奨用途 | ゲーミング |
| 商品の追加説明1 | 高いエアフロー。 |
| 商品の重量 | 12.55 キログラム |
| 商品外装素材 | 強化ガラス |
| 型番 | PERFORMANCE 1 FT |
| 扇風機のサイズ | 120 ミリメートル |
| 材質 | 強化ガラス |
| 色 | パフォーマンス1 |
| 製品の推奨用途 | ゲーミング |
| 電力供給の取り付けタイプ | トップマウント |
| 電球色 | RGB |
R**M
エアフロー抜群 背面コードもスッキリ
m-ATXからの載せ替えで購入 前後、上下に通気口があるので、エアフローは抜群です 背面部も、スッキリ束ねられるマジックテープが付いているので、かなり纏まりがいいです 大きいですが、その分作業がしやすく、あり余るくらいビスなどが付属されています(笑 元々ついているファンは少し弱いので、エアフローに拘る方なら交換する方がいいと思います あと、温度表示させるには、ドライバーを入れる必要がありますのでご注意を あと、両面ガラスなので、当たり前ですが重いです(笑 前と上下に引き出し式のエアフィルターもついているので、手入れも楽で、私的には大満足です
小**林
完璧
パーフェクトです! サイズ感ちょうどいい!見た目シンプルかつかっこいい!
A**X
Perfect modern case
Well thought and spaced properly for modern builds. Airflow is also top notch but cable management and the overall layout is so well designed that I believe is one of the best modern cases.
A**様
エアフローが素晴らしい
初PC自作ということでエアフロー及びかっこよさ重視でこちらのPCケースを選ばせてもらいました PC構成はCPU ライゼン5700x3D GPUライデンRX7800XT CPUクーラーDEEPcool AG620 WH 以下省略 聞いてた話だと90度行くとクーラーファン買い替えだと聞いてたのですが90度どころか70度すら滅多に行かない素晴らしいエアーフロー性能で満足しております ただRGB周りがかなり苦労したので初PC自作としては難易度高いかも?
S**E
最近のAntecは良いですね
メインで使ってるPhanteksのEvolv-Xに構造が似てて良さそうだったので購入しました。 左右両面強化ガラスですが先のケースと同様に裏面側(右側面)は配線カバーがあり見た目スッキリに配線できます。 ただこのカバー着脱にドライバー必要であったりガラスパネルがヒンジではなく取り外し式だったりと2倍以上の価格差の違いは感じましたが総じて良い作りだと思います。 エアフローは全面14cmx3ファンで吸気、上背面に排気な感じですが、 底面全体に及ぶ大きなエアフィルターが付いているにも関わらず底面にファンが付かないのがちょっと謎。(電源は良いとして) 電源シュラウド上部にファンを付けて吸気することを意図したのかもしれませんが、中途半端な開口部は塞いでくれたほうが個人的には好みでした。 最後になりますがRTX5090(ASUS TUF)も収まりました。 12V 2-6ケーブルを急角度に曲げないように考慮するとケーブルがサイドパネルに当たる程度に目一杯ではありますが。
D**T
通気性が良い
両サイドのガラス以外はメッシュやスリットになっており通気性は良い。 天板と両サイドが外れるがフレームに剛性がある。 ネジ穴の加工や位置の精度も問題なかった。 裏配線の経路通りに留めるならCPUは延長ケーブルが必須。 HDDとSSDを載せる台と配線が通過する所が被っておりSATAケーブルが不安定に見える。 天板のメッシュ形状が影響するのか簡易水冷ファンの風切り音がかなり目立つ。
心**ん
扱いやすい
大きので拡張性もあるので当分はこれでよく、買い替えはしなくてよさそう。
A**R
でかい!重い!
でかくて重い!というのはデメリットではありません。 重さは制振、静音性を向上させ、デカさは作業のしやすさと大型グラボが装着出来て大変良い。 グラボはPalitの4070TiSを使っていますが(328.9×130.5×63.5mm) フロントにファンを付けても尚まだ余裕があります。 裏配線などがやりやすく、カバーも付いている為見た目も損ないません。 前後上下全てにファンが装着できるのもうれしいですね。 惜しむらくはフロント部のフィルターがデザインの為に掃除しにくい事くらいでしょうか。 上面下面のフィルターは簡単に脱着が出来るので掃除しやすいです。
J**E
Sobre et efficace, excellent rapport qualité prix
Un boîtier très bien conçu avec une excellente qualité de refroidissement et un montage très facile de tous les composants internes. Belle qualité quasi tout acier et très peu de vis. Design sobre et sans chichi. La possibilité de démonter complètement la face supérieure avec 2 petites vis est géniale pour installer un radiateur AIO et accéder aux connecteurs 12v de la MB. Filtres partout accessible via des plaques magnétiques. Plaque de cache des fils arrières. Existe en blanc et en RGB. Juste top. Plaque de montage immédiat de l’alimentation super idée. Parties vitrées sécurisées à l’ouverture. Filtres à poussières partout. Caches métalliques des fils en partie arrière. Possibilité de monter un radiateur et partie basse pour refroidissement graphique à haut et d’un AIO de 420mm en face avant en lieu et place des ventilateurs livrés. Les ventilateurs integrês sont livrés montés à l’avant et à l’arrière. Un adaptateur bien repéré est fourni pour le montage rapide des liaisons unitaires du panneau de commande tels que power on, reset etc…. Affichage LED intégré au boîtier de la température CPU et GPU via une application windows qui pourrait cependant être améliorée pour sa stabilité. Discord de support ANTEC réactif. Prix très concurrentiel pour la qualité.
V**S
Un des meilleurs
Ce boitier est vraiment facile à travailler dedans. Le top s'enlève facilement pour faciliter le travail, des gros panneaux en arrière pour cacher les câbles, des ventilos d'origine de 30mm d'épaisseur au lieu de 25mm (donne un peu plus de pression statique), très solide, de la place pour les câbles en arrière et, enfin un qui s'est réveillé, un boitier qui offre les câbles du front panel en un bloc (qui ressemble à ceux de l'USB 2). Par contre, ce boitier est vendu comme étant une grande tour, or, c'est plus un gros moyen tour. Il est considéré comme grande tour juste parce qu'il peut prendre des cartes mère e-atx. Et le seul point négatif que j'aurais à dire c'est que si vous voulez mettre des ventilos dans le bas, ça prend des vis longues (ceux qu'on utilise pour fixé les ventilos sur les rad d'AIO) et Antec ne les fournis pas
Z**O
Great!
This is the first pc case I've ever bought and had to transfer into. I'm kind of new to pc gaming. Only been at it for the past couple years, and never did anything like this before. Thankfully, this case made it super easy. The size, options and components make transferring into this case super easy. The cable management looks incredibly clean by the time you're finished. The holes for the cables have these nice rubber padded openenings, and the openings are all over the place to maximize which cables come out where. All the panels (the top, sides, cable channel covers marked 1 and 2) are simple to remove. They utilized these metal notches that slot in, so you only need one thumb screw to secure them, which is pretty neat. Even without the thumb screws, there are these ball joint things the panels snap into, so the thumb screws are just an added redundancy. I had 2 3.5" HDDs. In my original review, I said there was only space for one but it turns out I'm bad at reading directions. There is space for 2. There's room for 3 separate 2.5" drives on the cable management side, so plenty of options for expanded storage. The ventilation is all over the place on this thing, so it shouldn't have any problems staying cool, and keeping air going. Speaking of air, the fans it comes with are big 140s in the front, and from what I can tell, they pull a lot in through that magnetic front vent panel. I had a situation with my motherboard in my old case, and my wishes were granted with my top mounted AIO here. The old case had a problem with space for said AIO at the top because I have the extra thick Arctic 360 radiator + fans, which had to be installed kinda of slanted to get out of the way of the CPUs power cable (the connector for which was at the very top of the motherboard). With this new case, there's enough space for everything to fit as it's supposed to. I haven't done any customizing of fan curves or anything, but I played some Cyberpunk 2077 at 4k with Path Tracing and all bells and whistles on, although not for very long yet, and my cpu and gpu stayed cool as a cucumber. My 3080 used to get up to the 80s. The 4090 doesn't go over 70. I don't know if it's the case, or the cooling system on the GPU, or both, but regardless, it's running nice and cool. I saw a video on YouTube about this particular case being a little more noisy than the more pricey ones like the Meshify 2, but if what it produced was more noise, I couldn't hear it. It's much quieter than my last case, that for certain. I'm not sure what else to add that is worth while. If you get a 4090 for this case, you may have to slip the top pci slot cover in over the back of the 4090, because the plate on the top of the card sticks out a hair on the back side. You sort of have to wedge it in (angled 45, tuck in the bottom edge over that plate, then put it upright, then push it in toward the motherboard, then you can screw it in, or even just leave the screw, because it can be a hassle, and it being slightly wedged in will keep it in place). One of the neat things about it is the screens are very easy to remove. The bottom one can be slid out from the front, like a lint trap on a dryer. The front most panel just.. Pops off with a light tug because it's magnetic. I'll be up front here, as I said, I am fairly new to pc gaming, cases, etc., but I am thorough, and from what I have found and seen for myself, it's a great case, while also being very affordable. The biggest selling point other than the ease of use, is definitely the cable management. It is CLEAN when you do it right. It looks awesome if you don't care for the RPG puke, and enjoy a nice dark and sleek appearance. Also, for being a "full" tower, it really doesn't look much bigger than the mid tower I had previously. Maybe if you jump from a small tower to this one it'll be more noticeable to you, but it fit great in the same spot. All in all, I definitely can recommend this case. Especially for those on a more beginner/intermediate level who want a lot of open space to work with.
D**S
Robusto y bien diseñado, algo vintage.
Excelente gabinete, una carta de amor para los constructores vintage, no esperes poder invertir la placa madre o encontrar soportes para la refrigeración liquida custom, ni siquiera trae elevador PCI-e, pero es pesado y fuerte como una tanque, tiene un gran espacio para crear bolsas de aire internas que ayuden al flujo de aire refrigerando tus componentes, te permite poner verticalmente una GPU y tiene espacio suficiente para los modelos grandes, ésta version performance RGB tiene perforación en la lámina trasera y aumenta el flujo de ventilación hacia la tarjeta de video, el ruteo de cables es exquisitamente simple. Los ventiladores "tranquil" no son tranquilos y son ruidosos, por los que los cambié por unos noctua, el espacio es suficiente para colocar mi nh-d15-g2, utilicé unas RAM de bajo perfil para no exceder de los 175mm, me sobra un espacio (7mm aprox) cabe totalmente un sistema de refrigeración robusto, pero supongo cabe una liquida AIO grande sin ningún problema ya que el panel superior se remueve y es muy fácil conectar los cables PSU al procesador. como único detalle a considerar es que el conector al panel frontal es un molex sin indicar cual es power o reset conect, lo cual puedes revisar al checar el PCB del modulo del panel frontal del gabinete el cual si dice que cables son, el espacio de la PSU es bastante largo pero un tantito angosto, que si bien es standard hay bahías mas amplias como las de los Be quiet, y necesitaras si o si un "fan hub" dependiendo de los ventiladores que conectes, el gabinete tiene un rgb HUB que solo permite 4 conexiones y solo 1 conector PWM :( El indicador panel frontal que lee las temperaturas funciona muy bien, no he tenido ningún problema con el software ni con su lectura de datos al momento (win11 24h2) con sus detalles, por el rango de precio no encontraras nada mejor, recomendado
Y**N
Çok iyi
Kesinlikle çok kaliteli. Tavsiye ederim.
Trustpilot
3 days ago
1 month ago