FX240 PRO 240mm AIO CPU Cooler, High-Efficiency Fans

This cooler is insanely underrated. It was easy to install, and has been going strong with zero problems for around a year and a half. You can swap the fans around and mount the radiator in different ways to fit your build. I have mine in a MicroATX build with few other fans, and it still keeps my 9800X3D frosty, with temps in the 40°C range while idle or under minimal load, and never exceeding 55°C even under high settings in Cyberpunk, or maxing out FPS in League of Legends.I am genuinely shocked at how high-quality this cooler is for such a low price. Sure, it’s not the flashiest, but I love how it looks in my low-profile black build.It does have a bit of noise when starting up my PC that sounds a bit like some small bubbles moving around; but during operation, it’s very minimal noise, and with a headset on, you can’t even begin to hear it.Excellent value cooler; I would buy another in a heartbeat. ID-COOLING is a brand to keep your eye on for sure.

I have been building PC's for 20 years and have always purchased high-end brand name parts. This is the cheapest cooler I've ever purchased for a PC and must say I have zero complaints. I've been running it for a month straight now with no issues and don't expect any. It is quiet, maintains a cool temperature, and the cooler itself looks sleek and simple which matches my entire all-black build. No frills, just black on black quality cooling for a solid price. If the aesthetic is what you're looking for and it helps out your budget, I would recommend this cooler all day. If you are looking for an affordable, yet quality AIO I would also recommend this one all day. Pleasantly surprised.

I am new to pc stuff but I started a little while ago And have some time under my belt. This is my first ever AIO for overclocking and it is great the copper is physically cool to the touch it is made out of aluminum if I am right and is very Durable. It seems to be a good product on the value of money. Now here is my problem I didn't do enough research and it doesn't fit my case(didn't stop me). The instillation was very easy by comparison the the old intel push pin coolers that can turn into anti mater at a stare. And (this is for me with a max overclock i5 11400) it is dead silent and over my speakers it is basically inexistent. So if you are like me and need a descent AIO for overclocking I would recommend this one.

I am using this in an A4-H2O and it gives some of the best performance to dollar of any radiator. It is a plain black so it looks great in any case, the height of the cold plate and a standard 240mm radiator allows it to fit in most SFF cases. The installation is very straight forward and takes maybe 5 minutes on the first try, then can be taken on and off repeatedly without any problems. It provides amazing cooling even though it's inexpensive. Due to the price, it also leaves room for upgrades, such as the Noctua A12x25 G2 or Phanteks T30 for even better performance.

First time experience with an AIO cooler. This one was cheap so I took a chance with it on my i5 11400. It worked much better than the arctic freezer 34 I had and cpu would never go over 70 Celsius while under full load, granted it is a low tdp processor at 100-110 watts. Problems started a few months after I got it. It would make a weird scraping noise on startup that was pretty loud and annoying, and would last a minute or two then go away for the rest of the time I used the computer. I think this was the water pump itself as I was listening for it and it was definitely not the fans on the radiator and was coming from where the processor sat. I also use this computer daily so it never sat for too long. The pump was also definitely not running dry since the radiator was still full of fluid being only a few months old. It would also occasionally make a bubbling sound every now and then, not sure if that is normal either. I ended up just taking it off and going back to air cooling, as I did not trust it and did not have enough money to replace my system if it were to catastrophically fail. I doubt anything crazy would have happened, at most maybe the pump was defective and would prematurely die but I was paranoid especially since I had never heard of this brand before. I would spend a little more and go with a more known brand of AIO coolers if thats what you are looking for. Couldn’t return it as it was outside of the return window.

This AIO looks great aesthetically with a minimal sleek design. It also does its job keeping temps low. Main pain point for me is that it has a constant humming noise. Without this pump running, my pc would be very quiet. Knocking points off because of this reason.

This is probably the first and only AIO I will ever buy because for what it is it’s really good. Good cooling for my Ryzen 5 3600 (overkill) but instructions were a tad bit confusing, needed some help. It’s been used for over 100 hours now and it works fine still, I can hear some humming though, and some water. It’s a metal built so it’s very durable.

Works as advertised. I don't like all of the lighting effects of other AIO CPU coolers and have my system blacked out. It was simple to install, comes with AMD and Intel backplates, all of the screws, etc. It keeps my Minisforum B795M motherboard/CPU combo nice and cool. I front mounted mine in my case, so I flipped the fans so that it vents into the case to improve airflow. I have three other fans pulling air out and it works beautifully. It was simple to flip the fans and they have double sided silicon bumpers to minimize fan noise. It comes with thermal paste so don't waste your money on that. Five very big stars!

Keeps my ryzen 5 7500f perfectly cool while not using to much power 👍

Istruzioni abbastanza chiare anche per chi non se ne intende e dissipa veramente bene

Pretty good, simple and efficient.

I previously had an Arctic Freezer III in my build and when the pump failed, I decided it was a good opportunity to explore other options.I went with the FX240 PRO, having been impressed with ID-Cooling products in the past, and I’m genuinely glad I did.**Look:**The cooler looks excellent in the case. Clean, understated, and premium without being over the top. The tubing and pump housing in particular give off a much higher-quality impression than the AIO it replaced.**Fit:**Installation was considerably easier than the Arctic Freezer III. Everything lined up perfectly, the mounting process was straightforward, and the daisy-chained fans made cable management far simpler than expected.**Functionality:**The daisy-chained fans are a great touch, making header connections quick and tidy. After around 30 minutes of runtime, it’s already noticeably quieter than my previous AIO while maintaining solid performance.**Size:**The 240mm form factor fits comfortably in the case with no clearance issues, and the tubing is flexible without feeling flimsy, which made positioning stress-free.Overall, I’m really, really pleased with the purchase. It feels like a meaningful upgrade in build quality, ease of installation, and noise levels — exactly what I was hoping for when switching AIOs.

ちゃんと冷却できる