Jb Clearweld Epoxy 8oz

Easy to use, easy to apply, clear drying epoxy, the sticks to most hard plastics. Low odor, about three minute pot life, and 24 hours til really tack-free and solid to go. Does require cleaning plastic surfaces with mild solvent or alcohol to remove any residue, or super light sanding to rough up the surface, followed by a clean wipe down or air blow off. Appears milky for the first minute or so after mixing, then becomes increasingly clear. Does start to get a bit stringy when your pot life is coming to an end, and it self-levels beautifully. Does have a tendency to travel during first 5 minutes, so watch the surfaces for horizontal curing. Have used up to 2 years past purchase date without problems, but pot life becomes less. Once it is mixed and starts to “string” and thicken, and slightly warm, you’re best to quickly finish up or start a new small batch. Mixing up a quantity over what you can apply in the first 2 minutes, is much harder to apply, and leveling becomes pretty-much a rework with a second coat. Most successful if applied In thinner built-up layers, rather than filling in craters or voids in one pass. Wet epoxy wipes with a tip in one direction. Cured might lift or peel with hobby knife. Sticks well to “clean” glass and roughed or cleaned hard plastics and metals. Note...Don’t mix up the red and black top-of-spout sealing caps when you put the resin and hardener away, or your in for some unplanned cutting and creative spout resealing! Excellent, clear, good bonding, low odor, epoxy adhesive that’s very easy to mix, apply, and cure. Weatherbug

Great value, easy to use. hope it lasts longer than the syringe with the individually capped bottles. Opened with a 4D nail and it comes out pretty slow, but recapping was perfect. Good bond, but doesnt hold well for 10 min (5 min is just for tacky level). A bit hard to keep surfaces flush and clean up extra, but thats the real goal.

Very strong bond and easy to dispence.

Best adhesive I've ever used! Hours any and everything!

I believe in epoxy for all kinds of repairs and this epoxy is great. This has been my go to epoxy for many years. I have used this with metal, wood, and plastics with great success.

I was told this epoxy is the one to get. I tried it and I agree.

Great for any job I love JB weld I use it all on all the jobs

Jb Clearweld Epoxy is far superior for many glue-type applications from my experience. Realize both bottles will stiffen up after a couple of years, so I suggest finding items to use it up within a year.

Very Good

It's frustrating that the product package came open and one of the bottles cap is sealed from the inside.