CRAFT RESIN Deep Pour Epoxy Resin Kit 51 Oz – for 2” Pours, Casting Resin Epoxy for River Tables, Wood, Flower Preservation & DIY Crafts – Crystal Clear & Bubble Free, UV Resistant & Food Safe

I’ve worked with many epoxy resins over the years, and Craft Deep Epoxy Resin is hands down one of the best for deep pours. It mixes smoothly, levels beautifully, and cures crystal clear with zero cloudiness. The viscosity is perfect for river tables, large molds, and thick pours—no rushing, no panic, plenty of working time. What really impressed me is the minimal bubbles. Even without aggressive heat, bubbles rise and release easily, which saves time and stress. Once cured, the finish is rock-hard, glossy, and professional-looking, with excellent color clarity when pigments are added. No strong odor, consistent results, and reliable curing every single time—this resin delivers exactly what it promises. If you’re serious about high-quality results and want a resin you can trust for deep projects, this one is a winner. I’ll definitely keep it as a staple in my studio.

I’ve tried many resin brands but Craft Resin is by far the best out there! Their deep pour epoxy has excellent clarity with no bubbles in sight. You have a long working time and NO ODOR at all. The finish product is strong and crystal clear with no cloudiness. Cure time is about 48hrs which is normal for deep pours. Craft Resins Deep Pour is absolutely worth it. It’s reliable, consistent, and produces a finish that looks high-end every time.

This deep-pour resin is great! It mixed easily and smoothly, and bubble-free! It's a slow cure, but that gave me plenty of working time with it. Color poured and cured perfectly clear and colorless. There were no odors at all, which I appreciate! Very happy with this product.

I gave the Craft Resin deep pour a try and I'm not disappointed in the resin. I poured a set of dice and a small skull with no colorants and no mechanical de-gasser to see how clear it pours and cures and it is very clear. The skull was an open mold and just shy of an inch deep. The large cavity cured clear and 97% bubble free. There were micro bubbles that gathered around the eyes and cheek bones where there was a ledge in the mold. I should have gone in with something after a few hours to eliminate them, but I wanted at true unaltered test. The dice were poured in a closed mold and, unfortunately, there were some large voids at the top against the mold cap. Again, I could have waited longer to cap it, or looked at it after a few hours to remedy it, but, same as the skull, I poured it as I would with any other resin and just let it be. Again, the interior of the dice are clear of bubbles, but there were some accumulated on the corners. It did take longer than 48 for it to be solid enough to demolish, but that may be on me because my house temperature is set to 70 degrees F. I did also pour a deep egg that measures 3.5 inches deep. I used colorants and poured in 2 layers 18 hours apart. At no time that I randomly felt the mold did it get hot or even warm. It is still curing and I can update when I demold it, buti was very glad that it remained on the cooler side. The only thing that I am disappointed in is the lack of certain information that may have helped in planning my pours or aiding in bubbles. Without messaging customer service, I was unable to find a pot time or a direct de-mold time. I am looking forward to trying out more of my deep molds with this resin, but will also be sure that I'm not on a time crunch when I do.

Recieved my order in good time, it was packaged good. This is the first Deep pour I have used. The only issue I had with the instructions was it is 2 to 1 and I know there is more A 2 bottles and only 1 bottle B so that made me think I use 2 parts of A 1 part of B .I did some research to verify this just expected something in the instructions. That does not take away from the product. So I decided to make a big snail added very lite blue and glitter. Just to see how the product took those items. The resin mixed well, was easy to measure, I did have a few bubbles but I figure that is from my lack of experience but the bubbles came out easy and the snail came out clear. I have attached pictures to see what I used for color and the size of the mold I used. I will use the product for any deep pours I try, next up will be a small table with a beach scene. Good value, easy to mix very happy with this product highly recommend this product.

This was my first time ever working with epoxy, and I'm so happy with the results. I wanted to preserve the flowers from my mother's spray from her casket, so I REALLY didn't want to mess it up. After watching lots of tutorial videos and reading lots of reviews, I chose this crystal clear deep pour option. It was very easy to work with and there was no smell at all. It was a little messy/sticky, but I wore gloves, covered my work area, and cleaned up immediately afterwards. I made sure that my flowers were completely dried before I began, warmed the bottles each time before use as recommended, made sure I mixed to the precise 2:1 ratio, stirred in one direction to minimize bubbles as recommended for 5 minutes each time, and I poured in thinner layers over several days. I did have a few bubbles, but I monitored after each pour and was able to pop most of them before they hardened. After my final layer I left it to cure for a full 48 hours. They very easily pulled out of the molds (I did use mold release spray that I'd seen in tutorials but don't know that it was necessary) and were completely hardened. One thing that I will note - and I have emailed the seller and waiting for a reply - as other reviews mentioned, I did not have enough hardener for the amount of epoxy, even though I was very careful and precise in my measurements. I originally purchased the 1.5 gallons but needed a little more so I purchased these smaller bottles. I had to use this bottle of hardener to finish out the epoxy from the original purchase, so now I'm left with almost a full bottle of epoxy and very little hardener left (see last photo - the hardener bottle should still be half full for that amount of remaining epoxy). That would be my only complaint about this product, but overall I'm thrilled with my results. As a first time epoxy user, I highly recommend this product! **Edited to add - The seller quickly responded to my message and sent me another set at no charge. Could not be happier with this product or this seller! Highly recommend! 5+ stars

I ordered 2 sets to make a deep pour mold for dried wedding flowers. I poured the first bottles set really nice, good instructions for my first time. When I was ready to finish the project and opened up the 2nd box order, one of the bottles was collapsed and yellow. Now I can’t finish my project until Craft resin can send me a replacement. If it want for the yellowed bottle, I would give a better review.

I was surprised to find the box included 2 bottles of part A and only 1 of Part B, however, this epoxy is a 2:1 so it made perfect sense ! The Epoxy was quite easy to mix together as I have experienced some brands can be thicker and tougher to mix. This Epoxy had absolutely NO odor ! The instructions included were clear and I knew to expect up to 48 hours for a complete cure. There were no bubbles in my finished product and I am absolutely blown away by the finish.