Epoxy Putty - 8oz / 227g Pool Putty, 2 in 1 Underwater or Above Fast Repair, Fix Leaks, Cracks, Filling, Sculpting - 2 Part Epoxy Sculpt Clay for Metal, Tile, Concrete, Plastic, Ceramics (Black)

With a few extra steps beyond what the instructions indicate, you can get pretty great results. The photo shows mine on a textured black countertop, so it’s not perfect but the smaller divot doesn’t show at all and the larger one looks more like a water spot. I should preface that I’m an artist that works with sculptural materials including epoxy so I might have a leg up on this but here’s what I did. I mixed the two parts thoroughly and pressed them into the damaged spots, using the provided putty knife, pressing down and pushing to the edge to level it. I see-sawed the putty knife over the edge to give it that slight roundness and then I gave it five minutes to start to set. It should still be fully malleable but not sticky and then you can use some water on it to smooth the surface with a finger (highly suggest a nitrile or latex glove). You can also use water and a plastic scraperto help remove excess from the surface while it’s still not cured. I left the patch a hair higher than the counter surface so I could sand it with micromesh sheets (should be able to get them here on Amazon) to make it perfectly level but if you’re after a gloss surface, and don’t want to polish with micro mesh, take a piece of packing tape and on the sticky side of the packing tape, stick a smaller piece of packing tape just big enough to cover the patch area, sticky side down. Tape this over the patch areas so the shiny side of the small piece of packing tape lays over the patch area and then with a flat block of some sort (I grabbed a nearby USB block cause don’t we all have tons of those hanging around). Wrap the block in a paper towel or thin cloth to reduce friction and then rub that over the packing tape to level the epoxy. Glossy packing tape will not stick to epoxy. Once cured, the epoxy patch will take on the gloss of the packing tape. The only downside to this method is if it’s not completely level the gloss will literally highlight the bump especially on dark colors like my black counter top. If using micro mesh, go go through all the levels using a block for the first 3-4 coarser sheets. Try to get it almost completely leveled with the first coarse sheet as the finer sheets don’t take a whole lot off, then it’s a half dozen swipes with each progressively finer sheet until you get to a sheen that matches your counter. Periodically stopped to wipe it down with a damp cloth and then dry it to see what the sheen is once clean. I realize it sounds like a lot of work but, especially for the price of these countertops, a little effort to make a good repair not only looks nice, it’s very satisfying to see the great results.

This epoxy putty is absolutely amazing! What I like about it over other epoxy is that it’s not nearly as sticky, and being able to wet your hands or even wet the putty, makes it so that you can prolong your work time and also avoid all the frustration of the epoxy sticking to your fingers or your tools. Unlike PC Woody, which is great epoxy, you can roll this into a worm and squeeze it into cracks or holes. I can’t say enough good about this epoxy. I rehab houses for a living and wouldn’t go without this stuff!

Easy enough to work with and really was generous with how much they provide

Pros: 1. easy to use: just combine both parts and fill it to where you want 2. come with gloves & spatula, helped alot 3. shape it whatever you want Cons: 1. a little bit to hard, need to be heated first to soften. 2. smells bad, do it with windows opened 3. takes a day to solidified

This stuff really works well. I have used several over the years and it holds up but you have to work the 2 colors together real well. Pretty easy to do. I didn't think it would work that well, but it has held up for a long time. Good buy.

Works way better than the normal brand we bought for years. The blue and white tube kind is what we used to buy.

Most take a very short time to dry this when I checked it 12 hours or it's not completely dry. 24 hours it was dry. I have not had long enough to comment on the durability

It worked as I had hoped

I was not expecting much when I ordered this 2 part epoxy. I have used many over many years. Did I get a surprise. First of all I got colour choices. ; black , white or grey . I found: it was good inside or out, held on many surfaces, took vibrations in stride and was easy to use with little mess . My first use was fixing a rear emblem on my car. That was eight months ago. It is still holding, gone through car washes and road trips. The repair saved me $350.00 as emblem was only cracked. Since then I have used around the home. My wife has used some as a modelling clay and to repair clay pots (not food safe however ). Great purchase!

This epoxy putty saved us!! We bought it for a leak in our pool. We were very skeptical because the pool was filled with water and we had this hole about half inch big. But we were desperate and wanted to save the intex pool we had just bought. The day we got it, we mixed it up. 2 people needed to apply the epoxy from the inside and the outside. But just like that, the hole was sealed and it's not leaked since. It's been a couple of months since we patched the hole. This epoxy has come to our rescue more times than just the once. There was a leak in our inlaws hot tub and this worked well there too! It's great that it can be used with wet surfaces! No regrets at all and will continue to recommend this to everyone!

Did a solid job at smoothing a crack i had in the pool stairs. I didn't have to drain and harden while under water.

are not the same color with whta i expected

Wear gloves and mix by hand. Easy to mold and fit into a hole. Exceptional hardening. The included trowel is useless so get your own.