E-Bike Battery Bracket for Battery Adapter Frame Mount,Aluminium Alloy Mount Plate for Hailong Batteries,Ebike Conversion Kit for Battery Adapter Frame Mount

These spare parts fulfil my requirements. But is missing maybe an additional length to ensure the fix use of the bottle hole. Eventually, I have solved the problem using one hole and fixing with the supplied material. One suggestion is to provide rubber strips instead of Velcro strips. This would reduce the risk of the patching the frame. To be recommended

Worked great for modifications made to my Happyrun G52 Ebike. I extended the battery from 1 to 3 batteries and I needed to place one of them under the frame which is where this came in handy. Worked like a charm but if you have a large frame you may need longer hose clamps

Good for trike where drilling is not possible

I am going to answer some questions that i was unable to find before i purchased so maybe you won't make the same bad call. First, the slots cut into the aluminum where the hose clamps are supposed to rest are cut to narrow. You will need either narrower clamps or to file the slots down about 2mm. Second, the back side of the of the bracket is completely flat. There is no concave edging to allow it to make contact with the bike tube cleanly. Because of this, it will not solve any wobble that already exists with typical drink holder attachment. Third, the bracket is so thick that it holds the battery even further off the bar than the normal rubber bumpers that came with your battery and if you were to add these bumpers under the bracket to reduce vibration and wobble, the battery would then sit almost about 3/4 of an inch off the tube. I don't recommend this bracket for any purpose.

works well

works great

I was pretty unimpressed with this. I gave it 3 stars because, with way more modification than should have been necessary, it did fix the problem I was trying to solve. I had the base that came with my e-bike kit attached directly to the water bottle bosses in my frame. There were three problems with that: I could only install it upside-down (so the battery had to slide up into it), it was off-center (due to the slightly off-center location of the water bottle bosses), and it moved around a lot more than I was comfortable with. I found this kit, which seemed like it would solve all three problems. Other people have commented on the mismatch between the 12mm hose clamps and the 10mm machined recess, so I was prepared for that. The first surprise was the size. One of the images in the listing shows this base with the factory base, which I took to show relative size, so I was expecting this base to be close to the same length as the factory base. It's a little over half the length - maybe 7". The second surprise, and probably the more important one, is that the hose clamps are total junk. In order to install them around the downtube of the frame, it's necessary to open the closed loop to allow the strap to be fed around the tube. This is done by running the captive screw in reverse. When I did that with the first of the clamps that came with this kit, the "captive" screw backed itself out of the buckle. I could have screwed it back into the buckle and used it, but the fact that it did what it did made me leery of using the clamps at all. Fortunately, I have a collection of hose clamps among my hardware assortment, so I used one of them. As to the 12mm/10mm mismatch, I solved that by running the plate over my table saw with the blade set very shallow. Being aluminum, the carbide blade cuts it easily, especially at such a shallow depth. In the end, the kit worked fine, and my battery now slides in from the top, is centered, and hardly moves at all. At the price, I'm okay with the purchase, but I have tools and hardware at my disposal, which a lot of people wouldn't.

Hose clamps are comically big AND they don’t even fit into the slot on the bracket, plus the Velcro doesn’t even stick to itself, what a joke. The bracket is solid I guess, but for the price and a trip to the hardware store for correct clamps it’s just not worth it.

Works okay.. I've crashed my bike a few times and this mount holds well

No clearance for bolts. Velcro straps not long enough to go around battery and don’t hold anything. Save your money and don’t buy

Some people are claiming this product isn't long enough or as described. They're wrong. It looks like the pictures and measures up to the numbers provided. Also giving 3 stars without complaints. The Triple Bob, which is the standard for quality when it comes to battery mounts is only .7 inches longer. The Triple Bob has a curved bottom and is meant to mount on low water bottle standoffs and interface with the tube of your bike. If you have taller water bottle mounts and atypical tube size like a lot of purpose built e bikes have the curve of the triple Bob will do you no good anyway as it's made for converting more traditional bikes. Obviously if you have a massive e bike frame the included straps might not fit depending on where your water bottle mounts are. That's a simple and cheap problem to solve and doesn't detract from the quality of the actual product. The only downside I found to this product was slight cutting oil residue left over from manufacturing, and a tiny amount of left over metal fragments. The machining was pretty clean, no sharp edges, all the included screws, clamps etc fit. Best price I could find for anything similar, and worked perfectly with a little planning and adjusting.

Sturdy, well-made bracket with a good amount of fastener adaptability for many batteries.

Item is sold so as to secure battery the clips provided are too big they do not fit in the channels DO NOT SHOP FRIM HERE. GO ELSEWHERE