On-Q/Legrand AC1040F Universal Mounting Plate

Let's start by saying the overall result is excellent. As mentioned in my headline, I originally purchased these mounting plates to go in my existing (metal) Legrand On Q enclosure installed when the house was built in 2016. I was sadly surprised to find them 100% incompatible! Anyway, I decided to stay with the Legrand Brand and replaced the enclosure with a 30 inch version from my local (Blue) home improvement center. Note: The 30" enclosure does not fit Qty 3 of these 10" mounting plates. Only Qty 2 of the 10" and Qty 1 of the 5" raised plate. That actually worked out better because the raised 5" plate was able to pass cables underneath it to other components lower down in the cabinet. In hindsight I should have gotten the 42" cabinet because I realize now it would've been nice have room for future growth and to have added the Ring home alarm system module inside the cabinet. I did manage to include a home network video recorder (NVR) for the Qty 8 POE cameras I installed a few years back. Anyway, I very please with the final result. Get yourself some Velcro straps because the red clamps have limited attachment points on the mounting plate, especially if you want to mount them underneath a component. That's why mine are seen mounted on the sides. They do hold the weight of the components very well. The heaviest piece is the NVR and I imagine that's at least 3-4 pounds. Excellent product overall! 5stars

Works well, and fits perfect. Pricey but acceptable.

Works as needed, quick to install in my legrand media enclosure, the push clips secure it and don't feel like they will pull out, also using the turn tabs to hold a 12lb backup battery and it's not going anywhere. Was well worth the money to add to my enclosure. I don't use pressure mounts, but they feel solid for lighter & smaller devices.

Does the job. You don't have many other options when you have one of these OnQ networking closets. They are too shallow, you always have to add extra outlets, unless you're lucky and just have a modem/router. I tried using the clamps with these plates to mount my switch and router but I just end up using velcro tape to strap them in, works a lot better and you don't have to deal with the little red mounting clamps.

This is very helpful in organizing a panel. Love this!

This looks like it will be great, and it could have been if they had giving even one thought about how people actually mount equipment in a structured wiring panel. Instead it is incredibly frustrating, since it looks way more useful than it is, since almost nothing fits where you need it. I have a modern 42" plastic legrand structured wiring box. It easily accommodates 4 of these, but if I'm being kind, I'd say they turned out to be only slightly better than nothing. The problem is that almost all of the slots are oriented in the least useful way possible. If you want to use the orange mounts that are included, they only really fit 90 degree off of the slots. That means if you want to put them under a piece of equipment, you'll either have to wedge them in sideways (where they don't really fit and can easily come loose) or put them in the vertical slots near the center (which will consume an entire row) or along the sides (where they are useless. So basically they do not fit. I ended up buying some screws and a long roll of velcro and pretty much attaching everything with that. But even that is hard to do, because there is hidden bracing in the back that makes it very difficult to push the velcro through. Also, the slots are offset in some rows, making it difficult to even make the velcro fit properly. So you are forced to put things "where they will fit" instead of where you want them. The push pins are useful only for attaching this board to the box. They are useless for everything else, because they are too long and too thick at the head to secure any of my equipment. So basically, this is expensive, nearly useless and very poorly designed. If I hadn't already invested so much time in to making it work, I would have just returned it. If I had it to do over again, I would have just bought a roll of velcro and used that plus simple screws. That would have been much cleaner and easier, and would have saved me hours of aggravation.

I was unsure if these were going to work with the Leviton brand enclosure, but can verify they work with the Leviton 28” plastic enclosure. Provide a lot of mounting options and are sturdy. I used two of these in my enclosure. Fit great and would definitely recommend.

The plate is ok, it is doing its job. However plastic ratchet clamps are made of quite brittle material. Repositioned them a few times on the panel and one of them started falling apart. Thought contacting the manufacturer through Amazon, and Amazon directs me to the Legrand support. Contacting Legrand support and they send me back to Amazon. Do not want to waste time on this ping-pong and returning the purchase, etc. Just keeping in mind for the future shopping.

It works and takes up full width of my panel. Very happy

Llego completo y sellado