Plus 0-10V Dimmer Wi-Fi & Bluetooth Smart Dimmer Switch Controller Light Control iOS Android App No Hub Required Compatible with Alexa and Google Home Smart Scenes

I have paired a couple of these with Reylax 24V dimmable LED drivers to control LED strip lights, and they have been excellent. I fitted them near the drivers in the loft above the rooms, and they have worked flawlessly for well over a year. Unlike the experiences of others who have left reviews, I find the dimming to be very smooth, with no noticeable steps in brightness - maybe the drivers or lights that other people used are the actual problem, not the Shelly dimmer. I like that you can set the speed at which the lights go from off to on and vice versa, ramping up (or down) over a few seconds. I also like that you can set a schedule of how bright the lights are - one of the rooms I used one in is a bathroom, and I have set the lights to come on at a low level overnight so as not to be blinding. I have them set turn on and off with a simple switch, although they can be set up to work with a push switch (press and hold to change the brightness) or two push switches (one to increase and one to decrease the brightness). I have these connected to Alexa, via the Shelly skill, and to Home Assistant. For the latter I used MQTT because they are not installed in the house where my Home Assistant server is located. Voice control with Alexa works well and instantaneously, as does control from Home Assistant. Like many Shelly devices, they can be set up to act as Bluetooth proxies in Home Assistant if they are on the same internal network. This does not work for me directly because of where they are, but I have set them up to run a script that connects to Bluetooth room temperature sensors and sends that data using MQTT, which is very useful. Overall, even though they are relatively expensive, I think they are excellent value for money for how they work and what they are capable of beyond they basic light control functions.

Dimmer-Controller funktioniert einwandfrei. Man sollte aber beachten das die 0-10 Volt aus einem PWM-Signal bestehen. Manche Dimmer mögen das nicht. Besser dann den Shelly Dimmer Gen3 benutzen, der liefert ein sauberes Analogsignal.

Perfect

This product was a perfect solution for my LED panel light. The LED panel was so much brighter than the fluorescent light it replaced. I powered up and configured both the software and Alexa control before installing the dimmer. I set it to boot up at 50% and can voice command it to 100% when needed.

Ottimo prodotto. Buono per dimmerare lampade fino a 10v. Con l'app shelly è facile da configurare. In più è integrabile facilmente anche con home assistant.