Matx Case:High Airflow Micro ATX Case, Support MATX, Mini-ITX, Micro ATX Case Slim with USB3.0x1 I/O Port, Black with 80MM Fans

Got this for the price, its a little thin but makes for a very compact and light case, i mounted a harddrive on the front, an ssd on the bottom, radiator on the front above, the radiator and the exhaust fan work great in tandem and its nearly silent, handles my GTX 1060's heat well and everything fit snug with a little planning.

This is an excellent small for factor Computer Case. I have been building custom computers for 26 Years and have used 100's of cases and i REALLY like this case. !st its an EXCELLENT case for the Price, 2nd its good looking case (especially if you add 1 or 2 120mm RGB Fans (it doesn't come wit them) it does have 1 rear fan (not lighted). Cable management is a bit of a challenge because there is no space for them between the case and side panel, so they have to be inside the case (where there isn't alot of free space). It is possible Especially if you have a modular or semi modular Power supply and don't have to use all of the cables. If you only use 1 120mm fan in the front you can organize and cable tie them in the upper right of the case. Anyway i have used many small case and i do like this one very much. If you are looking for this type case DON'T hesitate Buy this one...

I recently purchased the MATX/ITX High Airflow PC Case, and I must say, I'm thoroughly impressed. This case strikes the perfect balance between compactness and functionality. Despite its smaller size, it accommodates both MATX and Mini-ITX motherboards seamlessly, making it versatile for various build preferences. One of the standout features for me is its exceptional airflow design. The case comes with strategically placed vents and fans, ensuring optimal cooling for my components even during intense gaming sessions or CPU-intensive tasks. I've noticed a significant difference in temperature compared to my previous case, which speaks volumes about its cooling capabilities. Build quality is another aspect where this case shines. Despite its affordable price point, it doesn't compromise on sturdiness or durability. The materials used feel premium, and the construction is solid, providing ample protection for my components. Moreover, the layout of the case is well-thought-out, making cable management a breeze. There's plenty of room to route cables neatly, which not only improves airflow but also adds to the overall aesthetics of the build. In conclusion, this MATX/ITX case exceeded my expectations in every aspect. Whether you're a casual user or a hardcore gamer, this case is sure to meet your needs. I highly recommend it to anyone in the market for a compact yet high-performance PC case.

Im rating this case 3 stars because there's a couple issues (I would rate it 4.5 if I could) but this is an overall good, small and cheap case. The biggest problem is also the reason I bought it: it's very small. I put an mATX motherboard (Gigabyte B550M-DS3H AC) in it, and it's a 9.6"x9.6" board. It sits right up against the front IO panel PCB, and you will not get two 120mm front fans in with a board this big. I even had to modify just one to get it to fit around the ATX 24 pin connector. The included 80mm is molex-powered, so I recommend just throwing it out and using a PWM 80mm fan. Overall, I'm happy with it. It's cheap, light, small and it works. Just be ready for some issues if you buy one.

Pros: - Cheap (as low as 18$ of you get the same case on aliexpress) - Smol (~15L in volume) - Aesthetically pleasing Cons: - not beginner friendly - difficult to cable manage (but not impossible with good planning) - construction isn't the sturdiest but with the side pannel on doesn't flex too much - front fan mounts don't allow for a 120mm radiator or alternate heights to mount the fans Other notes: - Can fit a 267mm in length gpu if you don't mind disassembling and reassembling the card like a ship in a bottle, as well as omitting the bottom fan - max wattage for a CPU with the largest cooler that will fit (PA 120 mini) is about 100w, any more amd it'll thermal throttle. - max wattage for a GPU is about 240, any more and it'll heat the CPU too much and also thermal throttle. - the holes on the side aren't quite big enough for regular case fan screws but thinner ones with a nut on the back will fit(did require widening slightly by rotating a Philips screwdriver in them) - does fit a 80mm fan with 4 screws on the side, or a 92mm fan with 2 screws and slightly cockeying the fan(ONLY IF YOUR GPU DOESNT EXTEND ABOVE THE TOP OF THE PCIE BRACKET) Overall: Definitely can't beat it for the price, does have room for improvements but if you set your expectations accordingly you won't be disappointed DISCLAIMER: he first one I received didn't appear to have shipping damage but the case was bent up and dented where the PSU mounts Parts list: CPU: 4790k @4.6ghz 1.269v CPU Cooler: PA 120 mini Motherboard: ASUS Z97I RAM: Gskill 2400nhz cl10 GPU: GTX 970 FTW+ 1500mhz (1.2v) 8300mhz PSU: TX550m FANS: 2X 80MM TR8, 1x 120mm TR12

Looks very nice and is compact l!

Bastante justo para meter una grafica, pero me gusto el tamaño, el ventilador que viene con el case es algo ruidoso pero sirve perfectamente. ＼(^-^)／

Un gabinete pequeño, pero útil para lo que yo quería. No esperes muy buena calidad de materiales. Otra cosa positiva es que si viene con los tornillos necesarios para armar una PC en este gabinete

I had a bunch of older components laying around that would make a nice gaming PC for steam os(in my use case chimera os). I wanted something on a budget and could fit into a tv cabinet. This fit the bill. It unfortunately didn't fit my rx570 which mine measured 260mm the max size this case can supposedly fit. I'm sure if if I really wanted it to fit I could make it but it was just temporary until a new to me rx5600 arrives (that's is shorter). So as temporary solution to my temporary solution I used an rx6400 from another build. A modular power supply would be a lot nicer since you can't run your cables anywhere to hide them. The case didn't have any noticeable sharp edges other then where you punch out the slots for the GPU or other add on cards. Overall I'm happy with what it is. It was less then $50 cad when I ordered it and offers good air flow. I don't think you easily get a 260mm card in this case but your milage may vary depending on the components you use.

As far as budget cases Go, this is a great one, holds an ATX PSU so compatibility is awesome, and there's a surprising amount of volume for coolers and a GPU, also quite modable if you wanted to do a front mount GPU for best cooling performance