UltraGlass Top 9H+ Armor for iPhone 15 Screen Protector Glass, 2 Pack | NO.1 Military Grade Shatterproof, Screen Protector 15 Tempered Glass, Longest Durable, One-Pull Tray Full Coverage 6.1"

I just applied my first UltraGlass Screen protector, and the application system works great! I will be back in a few weeks to give report on durability. But so far, so good. 1. Remove old protector, applicable. 2. Thoroughly, clean the phone screen with a lint free cloth or paper towel dipped in rubbing alcohol or denatured alcohol. (I prefer denatured alcohol. KEEP AWAY FROM SOURCES OF IGNITION!) 3. Look across the screen to check for lint and use one on the provided lint free polishing clothes as needed. 4. Apply the UltraGlass screen protector using the included template frame. 5. Allow the screen protector to adhere to the phone screen. Help it on the edges by applying light pressure with your finger, movingly from the adhered portion of the screen protector towards the edge, watching the air gap disappear in front of your finger as you slide towards the edge. 6. Polish your new screen protector and enjoy your phone, knowing your phones screen is protected from cracks and scratches! Less than 5 minutes, if you need to remove old screen protector. Two minutes if you are placing the screen protector on a new phone. I am glad I spent a little extra money of the UltraGlass Screen Protectors. The package comes with a frame for application, so the Screen Protector is perfect aligned. You pull the tab to expose the adhesive to the phone screen, then just have a little patience, and watch the screw adhere itself you your phone screen. About 30 seconds. I needed to give it a little help to reach the top edge. Be sure to apply light pressure to the protector to where it is already adhered to the phone screen and, gently, help the adhesive finish bonding to the screen. Work, slowly from the bond part of the screen towards where you see an air gap. You should see the air gap disappear in FRONT of your finger as you gently, and slowly glide your finger towards the edge. Applying light pressure on the edge of the screen and sliding your finger towards the bonded portion of the screen could result in an air bubble, so DON’ DO THAT! It should go without saying that I, of course, thoroughly clean the phone screen with denatured alcohol, sometimes referred to as, “FUEL.” So don’t smoke while cleaning! Rubbing alcohol will also work, but rubbing alcohol is more than 1/2 water, as opposed to denatured alcohol, so it takes rubbing alcohol long to dry. But, if that is all you have, go for it. Just be sure your screen is dry and lint free prior to applying the protective screen. Cleaning and assuring no lint is on the phone screen is the most important step so don’t skimp here. Actually adhering the protective screen to the phone screen is the easiest part thanks to the UltraGlass template. It took me far longer to write this review than it did to, flawlessly apply the screen protector to my phone. Flawlessly applying the screen, including cleaning took less than two minutes. This was a new phone, so I did not have to remove an old screen, first. However, that should not take long and denatured alcohol will remove any stray adhesive from the previous screen protector. Great product, great system for application! Perfect fit, great value for the money!

Very easy to install and fits exactly to my phone. I couldn’t tell initially that I had put the screen protector on because it was so precise and exact. Very awesome. As far as installation goes, very easy and no problems whatsoever. Instructions are very clear and the installation kit is good quality. The screen protectors privacy features are awesome, one of the best I’ve used in a while. I also love how if you hold your phone up and look at the side you can’t see your screen. I’ve had a few privacy screen protectors and it has always bothered me you could see out the side of the screen protector. All in all, very happy with this purchase and I will definitely be looking at this brand going forward and would definitely recommend it.

UPDATE: After a while, I started having similar fingerprint issues and had to occasionally tap it 2 times to register. I checked with Gemini, my AI, and it solved the problem. I had dry hands. So I could use moisturizer or dampen my finger first. No more issues and even with my moistened fingers, I don't leave smudges. This was the third brand of screen saver that I installed on my Pixel 10 Pro XL. The kit comes with everything you need. The frame aligns the screen saver so there is no guesswork. The fit was perfect. Even the squeegee was impressive, not like the cheap cardboard ones included with other brands. This was made with heavy plastic with the edge covered with cloth. There was absolutely no drag when using it. It went on easily and at first, I couldn't tell if the glass was on my phone.(The fit was perfect) Then I saw a tiny bubble at one corner so I knew the screen saver was installed. I used the enclosed squeegee to push out the bubble and it worked perfectly. No bubbles, no dust, it was invisible. Then the big test. The past two screen savers had trouble with the fingerprint sensor. I had to push firmly two or three times to get them to register. I used all the tricks like adding the same finger multiple times, increasing the screen's sensitivity and re-adding the fingerprints after installing them. Nothing worked. This one worked perfectly with the increased sensitivity. Since I didn't have to re-add my fingerprints, I left the multiple prints for the finger. The whole thing took less than 15 minutes and I am thrilled. This is a keeper!

Was easy to install, fits my phone perfectly, I like the screen but it’s definitely not all a privacy screen but it good quality and not cheap and it’s durable. I’ve had no bubbles yay! So overall it’s good but if your wanting If for privacy this is not the glass to get. So I am a bit disappointed about that but I still like the glass anyways. I’d definitely buy this glass again. Comes with two glass and accessories to make sure the glasses goes on well and a tool to help with the bubbles I’ve never had to glass go in this easy and perfect. Highly recommend this glass.

I chose this screen protector after watching some YouTube reviews, and I appreciated how easy it was to install. I had no issues with it. I drop my phone a couple of times weekly, but last week, I got a new phone case. While at the drive-through, it slipped and fell. The screen was cracked, which ruined my day. However, after removing the screen protector, the phone screen was fine. It was great that the package included two protectors, so I could install the second one immediately.

I recently purchased the UltraGlass Anti-Glare Tempered Glass Screen Protector for my iPhone 16 Pro Max, and while my experience had a rocky start, it ultimately turned into a fantastic one, all thanks to UltraGlass's exceptional customer support and the outstanding quality of this product. Upon receiving my initial order, I was disappointed to find the packaging damaged, and the screen protector developed persistent air bubbles that refused to disappear even after a week. I suspected the damage during transit caused a defect. However, this is where UltraGlass's customer service truly shined. I reached out to their support team, and I was immediately connected with a friendly and efficient representative who understood my concern. They promptly arranged a replacement for me at no additional cost, and within just three days, the replacement order was confirmed. In only five days, I had the brand-new UltraGlass screen protector in my hands. The replacement product arrived in perfect condition, and I was eager to give it another try. Installation was an absolute breeze — clear instructions, a high-quality squeegee, and perfectly fitting edges. This time, the result was flawless — no dust, no bubbles, and a perfect fit. The 3D-edge design was a pleasant upgrade over the standard 2.5D-edge found on most screen protectors, allowing it to seamlessly fit with my premium Pitaka Military-Grade 600D Aramid Fibre and Benks Montage ArmorPro Aramid Fibre cases without any edge-lifting or bubbles. But the real standout here is the screen quality. The anti-glare technology works beautifully in sunlight, and the lack of a plastic covering on the earpiece area is a much-appreciated design choice. Even better, this screen protector is a dream to use with polarised sunglasses — no annoying rainbow glare. The oleophobic coating is also the best I have ever experienced — it’s incredibly smooth to the touch, making swiping a joy and significantly reducing fingerprints and smudges. I even tested it with a specialised wallpaper that checks for edge coverage, and it passed with flying colours — no part of the display was obstructed. It is truly a premium screen protector that enhances the iPhone experience without any compromises. I was already a previous UltraGlass customer since late 2023 on my iPhone 15 Pro Max, but UltraGlass has earned a loyal customer in me, not just because of their superior product, but because of how they handled my situation. If you are looking for a high-quality, anti-glare screen protector for your iPhone 16 Pro Max that is easy to install and backed by stellar customer support, look no further. Highly recommended!

Great item, it works very well blocking the side view from prying eyes LOL! Applying it is super easy. I needed to fill a warranty claim, and the replacement was sent quickly without issues and without having to pay “shipping fees” like other companies ask for. Highly recommended it!

I tried out this screen protector and it installed pretty flawless and it went on without issue. However, I also bought the Otterbox Defender Pro XT (for my Pixel 10 Pro phone). This is why I will explain why I took away 1 star. When installing the Otterbox, the top and sides of the protector screen bubble out when pressed from the sides and even the top portion. I am not sure why that is, but I took it back out and the screen springs back with no bubbles, but when I re-installed the Otterbox, same thing. I understand that this is not tested with every protector case in existence, but Otterbox is a very known brand. If someone has any insight...I'd definitely like to know how to fix this where the screen doesn't do that any longer. I love the Otterbox cases and at this point I may have to switch to another screen protector or try another phone case. If anyone knows or have experienced this same problem and know a fix, I would like to know. UPDATE: OK, so this is what I have found out. This screen protector is a bit big, because the hard case top portion of the Otterbox case shifts into the screen protector. I tried another screen protector and it is a bit smaller all around, but the Otterbox case does not touch the sides at all. I hope UltraGlass reads these reviews & fixes or has another type that is more compatible, but other than this weird dilemma....It is a very nice & easy to install screen protector. I wrote this, in hopes that this isn't any particular companies fault, but if people are having bubble issues, that their screen protector tolerances may be too tight (too long on all sides). My recommendation is find the one that fits the case you decide on. The UltraGlass may work for other brands, but this is definitely not compatible with the Google Pixel 10 Pro Otterbox Defender Pro XT case. Good luck everyone and hope this review helps a bit when frustrated.

This is by far the best screen protector I've ever had. It went on perfectly with no need to push any bubbles out and the rounded edges go right to the sides of the screen. I highly recommend it.

Muy fácil de instalar

My previous screen protectors weren’t really built for the iPhone 16 Pro Max given that the black borders cover the corner “L’s” on the camera viewfinder. I stumbled upon this one from a forum on how this would be better value than the Flolab 3D Nano Pro Screen Protector that they have since the Flolab’s were reported to be having bubbles due to the tray misaligning by how many mm. So I went ahead and bought it for my upcoming trip and replace my old one. It is very easy to install and keep your screen dust free prior to installation. I like how this one is the “anti-glare”, it really helps cut down the reflections from very bright sources. It does make a difference compared to my old screen protector and I am excited to use this and test it out on a very sunny day! For reference the case I am using is an Arc Pulse, so it also fits this case even though it’s like covering almost 94% of the screen. The sides does have some sort of curve so it feels like you don’t have a screen protecor installed and is smooth to touch compared to my old one which was flat. My only suggestion I would provide are the dust stickers, it should be big ones that cover the screen like what Apple store uses or Flolab. But other than that everything is top notch. Also I had an inquiry with their customer service and they are very polite and considerate. There was something missing with the package and they immediately rectified it for me.

Great product, fits nicely

منتج وحش جدا و غير الصورة لا انصحكم به