LIDYUK End Table with Charging Station, Flip Top Side Table with USB Ports and Outlets, Nightstand for Small Spaces, Bedside Tables with Storage Shelf for Living Room, Bedroom, White

Con: particle board thin gauge metal slightly small slight awkward assembly at the end Pros: fairly sturdy easy to assemble apart from the above-mentioned Con simple instructions unit complete as advertised all tool included Starting with the Cons. This is Chinese particle board. It's not real wood. The leg material is metal but thin. My guess is thin gauge steel of some sort. It is coated with black paint. This unit was smaller than I had expected which could be a Pro depending on what you are looking for. If you want an end table for a low chair or couch it will be sufficient. It would fit very well in a small apartment to add outlets, USB, and efficient storage space. Finally, the assembly was straightforward part from the final two shelves. I'd recommend having a small box or an assistant to hold the shelves as they are screwed in place. For one person this part can be awkward and fatiguing if you have poor upper body strength. Now on to the good. For such a small end table it is surprisingly sturdy. Included are some screw-in adjustable end caps for the legs which make this much nicer for wood, or tile floors. The instructions are in total about 10 steps. I mentioned in the cons it is made of Chinese particle board which is true however I was also surprised by the finish on the parts. usually, there are blown-out corners or rough router marks but this was finished fairly well. I hate that my expectations are so low that I was surprised by that but the finish on this particular piece was quite nice. They even added a miter cut for the drawer bottom so the electronics cable could be routed without additional fitting. The until came with all the necessary parts but more importantly, it also was exactly like the picture. Again, I hate that in today's world I have to write that but it is true. The outlets sit where they are shown in the picture, the size is estimated as close as possible, and overall if your expectations are correct for an $80 end table then you will not be disappointed. The last thing that I'll mention about the pros is that all tools are included. The only two tools I needed were a knife for opening packaging and at the end one of the foot didn't want to screw in so I had to use a pair of pliers to get it past a manufacturing defect in the tapping. Beyond that, you only need the included Allen wrench and a Phillips screwdriver. The one included is a nice size too. IT was study and fit the small screws exactly. There were only 8 screws so this was a bonus for anyone not in possession of a Phillips screwdriver. You might keep it for a while to use around the house. Overall I gave this 5 stars. I only took one star away from sturdiness as I have no idea how sturdy it will stay in the future. The long Allen head screws seem to be well placed in the particle wood. The question will be the wood as the screws seem well suited for the job. If the wood holds up then this would be 5 out of 5 for sturdy again with the understanding this is a light-duty end table made of particle board. It's a step up from Ikea but not by much. I wouldn't sit on it but you'll be ok to put a lamp, computer, coffee, and a small house plant. If the cat jumps up with all that it may become sketchy. At this time I'd recommend the product. It is doing the job I bought it for and I'm overall happy with the fit and construction for the price. If the quality were to be less then I'd price this much lower. Since there was some attention to detail I'd say it's priced about right. Anywhere between $50-80 would be correct and a good buy.

I love love love, love these end tables,. They have a nice slim design, and I'm using them in my tiny house. They were a perfect fit. I love that there are plugins and charging USB ports in the back and I was surprised to learn the top lifts up and there's some storage right under the top. It's a perfect place to hide my charging cords.

The first think I noticed when I received these at my door was how small the box was. It was fairly heavy but small. I opened it to find a neatly packaged product with foam protection. The instructions are well written and no tools are needed as they are supplied. If you have ever assembled anything from the big box "I" store you are familiar with the process. There are only two sizes of screws provided in these kits so it is easy to find the parts needed. All parts are well labeled and match the instructions. Follow them and you will have no problem. The outlet panel on the back has two 120 AC outlets and two USB charge ports. This is a nice touch. I do wish the power cord was a couple of feet longer. If you don't place these tables within about 30 inches of a power outlet, you will need an extension cord. My only other concern is that these tables are very narrow. I would prefer a couple of more inches to provide more table top space. These are particle board tables so beware! Do not leave your favorite beverage sitting atop these tables as the condensation will soon leave you cursing! Use coasters religiously with these tables. I do like the hide away space. The lid tilts up to access the hidey-hole which may be a concern if you have a lot of items sitting on top of it. I would have liked to see some rubber bumpers under the lid so when you close it down you don't get that wood to wood clunk. Overall I'm impressed with the design, fit, and finish of these tables. I think they would work well as a bedside table. They are not "fine furniture" but then again, they don't have a "fine furniture" price on them. They are a table. great for small items or maybe to sit in a corner with some plants on it. Check the measurements closely before ordering and understand what you are buying. Pros: well made, easy to assemble, outlets on the back, comes with tools, comes with one each extra screws. Cons: narrower than I would prefer, longer cord needed, rubber bumpers under lid would be nice.

I bought two of these and the first one I put together must’ve been an older version because the screws did not really screw in to their slots as well as I expected. After complete assembly, it was a bit wobbly. Definitely have to be very careful and pay attention to the instructions as they are not as definitive as they need to be. Second one came with much better quality screws, and I was able to put it together quite easily. Much more sturdy than the first one. These are the right heights and they take up minimal space. They are conservative in looks and the woodgrain even though it’s fake looks quite nice. They function quite well for what they were made for. Not a bad investment for the money.

I recently purchased the LIDYUK End Table with Charging Station, intrigued by its innovative design featuring a flip top and built-in USB ports and outlets. While the table itself is functional and stylish, there's one notable downside that hindered my overall experience: the instructions. The design of the LIDYUK End Table is sleek and modern, making it a stylish addition to any living room or bedroom. The flip top feature is a convenient addition, providing extra storage space for books, remotes, or other small items. The built-in USB ports and outlets offer added functionality, allowing for easy charging of devices without the need for additional adapters. Unfortunately, the assembly process was marred by the lackluster instructions provided with the table. The diagrams were unclear, and the written instructions were vague at best. Assembling the table became a frustrating and time-consuming task, requiring trial and error to decipher the correct steps. While I eventually managed to assemble the table, the poor instructions significantly detracted from the overall user experience. Once assembled, the LIDYUK End Table feels sturdy and well-made. The materials used are of decent quality, and the table appears to be durable enough to withstand regular use. The flip top mechanism operates smoothly, and the USB ports and outlets function as expected, providing reliable charging capabilities. The LIDYUK End Table with Charging Station offers a blend of style and functionality with its innovative design and built-in charging capabilities. However, the assembly process was hindered by the inadequate instructions provided with the table. If you're willing to overlook this flaw and appreciate the table's features, it may still be worth considering. Just be prepared for a potentially frustrating assembly experience.

Perfect size, nice looking, good, simple directions to assemble it. Sturdy. Love it.

Love our tables by our chairs. Charger for phone and ear buds. Electric outlet for lamp, etc. Great weight, yet not heavy. Top opens halfway for remotes or books. The finish is very nice, and they are easy to put together. Just what we were looking for. Price was perfect. And the perfect size. You won’t be disappointed.

Easy to put together, looks good, color is correct, and is well built, but the drawer is hard to access unless you keep everything to one side.

His table is perfect very good quality and the colour is great beside my chair.I bought it so I could charge my iPad can do phone also.I’m 100% happy with this table and they even sent a screw driver and Allen key.

Pequeña pero muy util

Looks nice. Easy to put together. No issues.

Nice table but darker than picture.

I received this side table when expected. I found it easy to put together. It looks nice and is strong enough for my use.