AUTOSAVER88 Headlight Assembly Compatible with 2005-2006 Toyota Camry

My Toyota Camry's headlights were getting to be so clouded as to become a risk. So I replaced them with this set of headlights. I was hesitant to do the installation myself. But I watched several YouTube videos and became convinced I could do it. The installation was easy. This set is an exact fit. Everything worked perfectly. I am surprised that my car looks so new. The body was well cared for. With the new headlights and fresh wax on the car, it almost looks like a new car. When you install the headlight, I suggest that you use painter's tape to stick each screw to the car right where you took off the screw. That way you'll have no problem matching the right screw to the right hole when it is time to reassemble everything. It took me 1/2 hour to watch videos and 1 hour to replace the headlights. You'll need screwdrivers and a socket set.

Was replacing my original headlights on my 05 Toyota Camry....these are shorter than the originals. Seem to be well made and have a nice appearance and would have looked great if they had fit......

Have had these on the car (Toyota Camry) since July 2023. Still bright- still look good

This was the worst after-market product install I have ever done. The outside metal alignment pin diameter on both headlights is too large. It is only approx 0.040 too large, but just enough to not allow the pin to seat properly in the plastic cup/clip until it broke the plastic cup and now I was in a jam. I had to use a piece of rubber tubing after that happened or I would not have a drivers side headlight until I get a new cup/clip (if I can find one and not have to go to a junk yard.) Even with the flexibility of the tubing, the headlight assy did not align properly to the body/drivers fender. No matter what I tried, not good. In addition, the outside rubber gasket is flimsy and not attached to the headlight assy well at all. Kept getting in the way/out of position when installing, I finally decided to super glue them in place. Turned out to be a very good idea. The passenger side alignment was much worse (approx 3/8".) I took out the new assy over-sized pin and used the one from the original headlight assy so the alignment cup did not get broken, but after the headlight snapped in, the alignment was way off with the passenger fender. Nothing was bent or twisted taking the old headlight assy. but when snapping in this headlight assy I bought here, alignment is just way off. My 2005 Camry is not a "pretty" car. I bought it w/ 109K miles and shortly after, the hood clear coat started peeling really aggressively and looks very very poorly now. The fenders just started the same bubble and peel earlier this year. Because of this, I have given up on the appearance of the car and concentrate on keeping it running well. I decided to keep these junk headlight assy's even w/ the horrible gaps. I cut off the old gasket from the original assy's and actually double stacked the gasket. It is going to rain tomorrow, so I did the best I cud and used a lil form-a-gasket to seal/secure the additional gasket. It was almost completely dark when I finished and had to reassemble the car to use in the morning (leave the house in the dark.) I will add pictures of the extra gasket on both sides. It is suppose to rain tomorrow and will see how these hold up. I just can't believe how far off the alignment is. The rear plastic moldings/covers are different than the originals, these being after market. These differences as a whole, I believe are the root problem along w/ the alignment pins size and mounted location. If my car appearance was better and it was not mid November (getting colder,) I would have returned these no doubt. The main worry I have now is if/when I have to go back in to change any future marker lamps. Have to pull the assembly to change. Anything that is headlight related I will be leary about in the future because I plan to keep the car until it's end life. I hate doing mickey mouse on anything. So, if these don't work out, I will chuck these and get some used headlight assys (factory made) and use one of the methods to clear lens haze off on You-Tube. I wish I had done that rather than buy/install these. Recommend not buying these because of the alignment/gap issues.

This is a great item! My headlights are much brighter and work way better now. However, my only issue is that it doesnt fit perfectly and you have to get a little creative for it to fit, but thats expected with aftermarket parts. Overall a great product!

I needed to also buy the plastic clips that hold the inner bottom edge of these to the car chassis because they were cracked. Once that was done they were easy to install and aim. Old headlights were yellow and cloudy. These are water clear and look amazing. Really makes the car look better.

03/26/2018. I had them installed by friend in a lil more than an hour. They fit purfect. So clear and clean. Makes car look brand new. I am very happy with them. There are several videos on I Tunes for installing them. The lens were covered in a wrap to keep them from scratching. The pointed corners had a foam sleeve. They came in timely manner. I don't have them installed yet, but can't wait! The price was very good too. Ty, the ones that were in it had two treatments. They didn't last. PS I will let you know how I like them later.

Ajuste casi como el de fábrica si eres inteligente los llegas a poner exactos

Excelente servicio!!! Calidad al1000% Felicito al vendedor y a Amazon por la cálidad y atencion en mi pedido. Lo mejor de lo mejor. Me encantó mi paquete Gracias!!! Amazon eres el mejor!!!

Excelente relación, calidad precio. Además llegaron antes de lo esperado.