eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Pine Green

No issues, fits, prints perfect, no breaks, nothing. Just works perfect with the PLA temperature default settings in 3d printer I have. It was sealed air tight went sent and the color is perfect.

I’ve used a lot of different PLA+ brands, and eSUN continues to be one of the most dependable options out there. The filament feeds smoothly with zero tangles or breaks, and the diameter consistency is spot-on, resulting in precise, clean prints every time. Layer adhesion is excellent, and the surface finish comes out beautifully glossy without needing any extra tuning. This PLA+ also has great toughness compared to standard PLA — parts feel stronger and less brittle, perfect for both functional prototypes and aesthetic prints. It sticks well to the bed without warping, and cleanup after printing is effortless. If you want a filament that performs well across different printers and print speeds, eSUN PLA+ is a solid choice. Great value for the quality and reliability!

eSUN PLA+ has become my go-to filament for most of my prints. I mainly design functional parts for use in tooling and fixtures and have never had any problem with the structural integrity or dimensional accuracy of this PLA+. I have run through dozens of rolls of black, grey, and fire engine red with no issues. I don't follow any strict climate control processes or store the rolls in any particular way. I try to remember to remove the filament from the AMS gearing when I don't plan to be printing for a little while, which I believe is a good practice. I always check the end of the filament for brittle arears before loading into the AMS and snap off the end by hand until I run into the first part of the filament where it just bends back and forth in my fingers. That's typically just an inch or two from the previous end of the filament and I never have any issues following this process. I'm more concerned with accurate prints that have great layer adhesion, so I don't typically print for speed, but I have no reason to believe that this filament could not be pushed to limits that I have not tested. Affordable, reliable, and consistent - I count on eSUN PLA+ to get the job done.

So far the best pla I’ve bought. Decided to try a brand that was directly supported by bambu and thought what’s a few more dollars for plus if I have less failures. First benchy already can tell the build just looks better has a shine to it almost and just better quality and experience from the get go. The red is a rich rich color and couldn’t be happier with it. Definitely worth the increase in price, don’t cheap out you save money in the long wrong not having repeat failures and spaghetti. I will definitely be replacing my other filaments with this brand and plus where available! Note: this is the first time I’ve ever been able to clearly read the benchy text on the bottom.

I love esun pla+ this filament is easy to use and good quality. I haven't had any temp or sticking issues with this filament, no clogging issues. Highly recommend.

I’ve already gone through 6 rolls of the stuff and it’s been great. The only reason it’s not five stars is because every once in a while you’ll likely get a spool that isn’t wound very well so you have to sit there and make sure it doesn’t catch on itself and ruin your print

I’ve used eSUN PLA+ for several projects now, and it consistently delivers excellent results. The Pine Green color in particular is stunning—deep, rich, and professional-looking without being overly glossy or flashy. Why I Love It: Prints Like a Dream: This PLA+ flows smoothly with no clogging or stringing. It adheres well to the bed (I use a glass plate) and layers bond cleanly for sharp, strong prints. Durable and Tough: Unlike regular PLA, this PLA+ has a bit of flex and doesn’t snap easily. It’s perfect for functional parts that need strength but don’t require ABS. Excellent Dimensional Accuracy: My prints came out to spec with zero warping or layer shift. The advertised ±0.03mm tolerance seems legit. No Weird Smells: While not completely odorless, this filament emits a very mild, inoffensive smell—definitely better than ABS or PETG in my experience. Consistent Roll: The filament is neatly wound and tangle-free. I’ve gone through nearly the whole spool without a single feeding issue. Minor Considerations: Requires a Bit Higher Temp Than Regular PLA: I print this at 210°C nozzle / 60°C bed, and it works perfectly. Just don’t assume it’ll behave like standard PLA at 190°C. Color Can Look Dark Indoors: The Pine Green is a beautiful shade, but depending on lighting it may appear almost forest green. Still elegant, just not neon bright. Final Verdict: If you’re looking for high-quality PLA+ that balances strength, reliability, and aesthetics, eSUN delivers. The Pine Green color is perfect for nature-themed prints, miniatures, cosplay props, and durable parts. I’ll definitely be buying more.

This is my first time trying eSUN PLA. Work great with no issues. Package was sealed well and was not brittle. It could have been spoiled neater but so far it hasn't affected print quality. Will be ordering more from eSUN.

The product itself is sound. It is the cheapest PLA filament I have ever bought. One downside is that it won’t fit in my A1 AMS, but it makes it all so much more affordable. One thing that bothers me though is the delivery, it was left in the elevator of our apartment complex without telling me a word about it. As I live on the first inhabited floor, I never take the elevator. I talked to neighbours and called customer support. I thought it got stolen because a big amazon package could be something pricy. Eventually before I went to sleep, a neighbour rang the doorbell, he told me that a package to my name was in the elevator. It is very inconvenient to have it delivered like this and not have any information about its location. All I knew is that it got marked as delivered. My delivery instructions also state that I want it left in front of my door if delivery fails, not in the elevator..

Works a little bit less good than bambu lab pla but that is expected with the a1 mini. Is cheap for it's quality!

Das Filament in Knochenfarbe macht bereits beim Auspacken einen hochwertigen Eindruck. Die Farbe ist angenehm dezent und wirkt natürlicher als reines Weiß, was besonders bei Deko- oder Prototypenteilen gut zur Geltung kommt. Beim Drucken lief das Filament sauber und gleichmäßig durch den Extruder, ohne Verstopfungen oder starkes Stringing. Die Layer haften gut aufeinander, wodurch stabile und optisch saubere Druckergebnisse entstehen. Die Wicklung auf der Spule war ordentlich, was ein ruckelfreies Abrollen ermöglicht. Im Vergleich zu normalem PLA wirkt die PLA+ Variante etwas robuster und weniger spröde.

Perfect filament , works great on my bambu p1s and x carbon.

جميل اللون نفس الصوره