3M Bondo All-Purpose Putty, Designed for Interior and Exterior Home Use, Paintable, Permanent, Non-Shrinking, 1.9 lb., 1-Quart

3M Bondo All-Purpose Putty is a versatile, two-part filler ideal for repairing a variety of surfaces like wood, metal, masonry, and drywall, offering fast, non-shrink, and water-resistant repairs. For best results, start with a small amount of hardener to avoid rapid curing, especially on hot days, and ensure the surface is clean and dry before application. Mix the putty and hardener thoroughly on a non-porous surface until uniform, then quickly apply using a putty knife or plastic spreader, working in layers for deep repairs if needed. Bondo becomes sandable in about 15 minutes, allowing for smooth finishing, but curing time may vary with temperature. Clean tools immediately with acetone and store the product in a cool, dry place with tightly sealed lids. With proper preparation and technique, Bondo delivers durable, professional-quality repairs for both interior and exterior projects.

For those of you familiar with Bondo filler in any form, don't hesitate to use this product... you'll be happy to know it's like the good ol' product you're accustomed to. "Have at it", as they say. For those of you that are even moderately handy and can follow some basic directions, you'll also do well. Almost all the 1- to 3-star reviews are obviously from folks that mis-used the product. They're even a bit humorous and worth a read if you need a smile. My primary recent use has been to fill and fix rotted wood on the exterior of the house - primarily windows. Common sense will tell you to remove all the rotten wood first. If there is some wood that is still suspect, use a wood hardening product. When you're ready to use Bondo, know that while the product is fairly thick, it can flow a little until it sets, so you may need to form a "dam" of sorts to keep it from migrating for a few minutes. When mixing it, follow directions and scoop some out... don't mix it in the can! Also, don't overdo the hardener... and if your first batch still hardens too quick, reduce the amount of hardener used, per the instructions. It really is not hard to use as long as you have a bit of common sense and can read. Also, be confident that you will get better at using it as you go along! I've tried many wood fillers, and this is my go-to product. For finishing, I use relatively course files, shapers, and sandpaper to get it close to desired shape, and then finish it with 80-120 grit paper. Sand/shape at a moderate pace so as not to clog your paper or tools... this material is actually quite easy to sand and shape as long as you don't go crazy and sand too fast or use too fine a grit. Bottom line - buy it and use with confidence - the product is very capable of enabling you to restore your exterior wood pieces.

I got this to do some repair work for a friend's wood party/event props to fill some larger chunks. Regular putties and spackles would not have been the best choice for many reasons so I decided to try this Bondo product. I have to say that it works rather well and it should hold up longer than other products. It was easy to mix and spread, but I have to say that you will need to work quickly when using this product. It does start curing rather fast, I would say the 3-5 minute range before it starts setting. Make sure you have everything you need to make any repairs set out and ready to go before mixing this. Also make sure any pre work is done before mixing. Then mix the product, spread it where needed and then let it sit a couple hours. After that you can start any sanding that might be needed, and it does sand pretty well for what it is. I would recommend this product for many repair needs due to its ease of use and durability. If you have ever used regular Bondo for cars, this is basically the same thing so it works the same.

Worked great!

always good！

Bondo putty requires a little experimentation to get the hang of, but works incredibly well once you get used to it. The two part system and mixing in a hardener might seem like a hassle compared to one material putties and similar products. However, being able to choose the amount of hardener you mix in is a huge advantage. This lets you choose the "stiffness" of the putty - you can get from quite stiff (dryish peanut butter) to very liquid (Nutella-ish) depending on your application. This also affects the dry time - stiff mixtures harden very quickly (a couple min) - thinner, more liquid ones give you more time to work or allow doing multiple small jobs with the same batch. Clean-up is pretty easy and straightforward. The cured putty sands well (though does clog sandpaper - just hit it with a stiff brush to clear the putty dust out). It also takes paint well. Two coats and it looks fine. The tub here is also an incredible value - a little goes a long way, and this gives you plenty of material to mix many batches. It also lasts longer without drying out than some products you might use for similar applications like wood putty.

I used this to patch a large (4in diameter, 1.5 inch deep) hole in a table. It worked well, but I would say that it might have been better to do what the container suggested, and make multiple applications. Also, the smell is VERY strong, so windows open, and fans on, and probably use a respirator as well. A couple of days later, and the material still has a slight smell. Overall though, it got the job done.

I ordered this product to repair chipped ceramic tiles. I therefore needed a product that would be white or light gray. The description for this product is incorrect, as it says that it includes a White Bondo Cream Hardener and that it turns Light gray when mixed. The Bondo Cream Hardener is actually blue and the product turns Light blue when mixed. I could not find the white Bondo cream hardener anywhere so I ended up calling the manufacturer who confirmed that the version with the white hardener is no longer manufactured. If you are going to paint over the product, it does not matter but if you need something with neutral color, this will not work.

I’ve used 3M Bondo All-Purpose Putty for everything from repairing wood trim and drywall to patching dents in metal and plastic. It mixes easily, spreads smoothly, and dries hard in under 30 minutes. Once cured, it sands down perfectly for a paint-ready surface. I really appreciate how strong the bond is—it doesn’t shrink or crack like some other fillers. It’s a true all-in-one solution for both indoor and outdoor repairs. A must-have for any DIYer or homeowner who wants professional-level results without the cost!

Really wanted this putty but took forever to arrive.

I have tried numerous epoxy fillers and this is the most manageable I’ve encountered. Excellent properties, spreads consistently. Hardens quickly and predictably over and over. Sands well, can be tapped, drilled, contoured. Very workable. Holds primer and paint. I’ve done a lot of wood restoration and this has become my go to product.

Great product to work with... exactly what I needed to fix my damaged door. Wish it was sold locally but still glad Amazon had it.

I used this to fill holes in a countertop that will have a new urethane coating applied. Does an excellent job. Dries rock hard but easily sandable.