Heavy Duty Welded Pull Up Bar Wall/Joist/Ceiling Mount Chin Up Bar | Multifunctional Pull-up Bars w/Resistance Band Hooks for Home Gym Strength Training, Sturdy Steel Construction Support 500 lb

Decided it was time to improve my pullups. I chose this one because of the length of the bar and I wasn't limited to a couple of hand-hold positions. I mounted this outside on my back porch to a 2x10 exposed beam. Instead of the included screws, which are heavy duty, I used 5/16-inch lag bolts to attach it to the beam. That worked great and is super sturdy, though using the included screws on an unexposed beam would have been fine too. This bar is really heavy duty and there is never a worry about whether it can hold the weight, especially with my lag-bolt installation. The finish is also excellent, and I have no worries about rust developing, even though it is exposed to outside moisture. If it ever did, a bit of sanding and repainting would suffice. The surface has a slight texture which makes the bar easy to grip. Once installed, I found that I couldn't do even one pullup. Not one! But, several times a day I would still give it a go, which I continue to do. After 5 weeks now I can do 4 good pullups!! So, I happy with the progress, and I have a target of 15 pullups by years end 9 months from now. I also use the bar for hanging: just grab on, hold and see how long I can last. Initially I could go about 30 seconds. Now I'm up to 75 seconds, so big improvement there, and I think that will increase too, it just takes consistent practice. I'm thinking of eventually getting another to put outside on my arbor where I could use it to work on muscle ups when the time comes.

Very well-made and sturdy. 4mm steel on the mounting plates, and the support triangles. Very clean welds all around — looks like they laser-welded it.

Easy to install and very high quality hardware included.

I honestly have no idea how I haven’t ripped the studs out of my wall. It feels like I’m going to with every pull up since it’s only held in by the four screws but I e had this for months and have done hundreds of pull ups on it including some with added weight. It was kind of hard to install (with a drill) so I used an impact driver and it worked flawlessly. Build quality is solid and the fit was pretty much perfect in my doorway. The grip is a bit smooth but I put some hockey tape on mine and it seems to have done the trick. Great value for the money. Super simple but effective design.

This pull up bar is very well made and simple to install with some basic tools and knowledge. My suggestion is to have a second person to assist. A good product at a good value.

Use this all the time. Solid construction. Made to last. Comfortable on hands.

Nice product but a little awkward on door frames for corner fed rooms, and can really only be used on a doorway, or a ceiling beam, never on a wall you’ll scrape the wall as you pull up.

Much heavier and sturdier than expected. The bar itself is thick — feels a bit large for my smaller hands, but it adds to the “heavy-duty” feel. Compared to the typical door-hanging pull-up bars, this one is on another level. Door-mounted bars always shifted, made me touch the floor, and had awkwardly wide grips. With this, none of those problems exist. Simple design, solid performance — this is how a pull-up bar should be made. I bought a pine SYP stud (2x6x50”) at Lowe’s for $6 and mounted it above the doorway. Then I secured the pull-up bar onto the stud using my own bolts and nuts. The result is extremely stable. Very satisfied — highly recommend!

I wanted a pull up bar that I could attach to the main wooden beam in the basement. This one is simple in design but that's exactly what I was looking for. Some are less expensive but this one just seemed better made in the photos and I believe it is. The width of the bar is perfect. The diameter of the bar is slightly bigger than most dumbbells or barbells I use but that's all right. The welds are very well made with no skimping (the welds go all around the metal pieces). The powder coat finish is great as well although there is no knurling to help with grip. The mount and supplied screws work as they should and once installed, will hold a lot of weight with absolutely zero movement or creeking. The holes provided to put the included carabiners through are a great addition for those who want to use a strap system for additional exercises. All in all I think it's a great solid bar that is well worth the asking price. One word of advice: If you purchase this bar make sure you have enough clearance for your head when you pull to your chin or even higher to your upper chest. Since the bar is at the same level as the mounts, some might hit the ceiling with the top of their heads. Measure before. If you need more clearance, buy a bar that hangs BELOW the mounts like most of the other sold on Amazon.

Just what I expected. Good value.

One of the screws that this came with snapped. Luckily nobody fell off the bar. This is a huge health hazard and this product should not be sold with the supplied screws. Now I'm left with 4 massive holes and a visit to a local DIY store to buy proper metal screws to install this.

Die Stange ist gut und macht einen wertigen Eindruck. Sie ist sexy-mattschwarz Die Halteplatten sind sauber mit der Stange verschweißt, die Schweißnähte sind sauber, flach und ohne Fehlerstellen. Gleiches gilt für die Oberflächen. Die Stange ist satiniert/mikro-angerauht, was mehr Grip gibt, ohne einem die Haut von den Händen zu reißen. Preis/Leistung sind hier UNSCHLAGBAR! Lediglich bei der Befestigung würde ich wirklich zur Vorsicht raten und NICHT auf die mitgelieferten China-Bolzen/-"Schwerlastanker" vertrauen! Die Aussparungen messen 8mm. Bei Balkenmontage würde ich die Stange mittels Schlossschrauben vollständig durch den Balken verschrauben und bei Wandmontage (NUR bei massivem Mauerwerk/Beton!) dringend zu deutschen Marken-Schwerlastankern raten! Niemand möchte erleben, dass die Stange im Klimmzug abreißt! ;)

家で懸垂ができるようになりました！ しっかりした作りです！