Hard Protective Case

I really love this switch case, it is the perfect color and I love the ergonomic grips! It wasn't too much trouble to put on the adhesive, but I could see how it could be challenging if you are not good with your hands or if you struggle with art projects/ arts and crafts. For me, I got this case instead of going for a switch skin or changing the front place, so it was a much easier and less permanent alternative. Only the actually switch console/screen piece gets adhesive-d on, the joycons just snap on. I did not use the provided button covers. At first I wasn't sure if I liked the ergonomic grips, but after testing out both I can say they do help compared to the standard grips. It's not like having a full on grip, but much improved over the standard and my switch still fits in the case. Dockability- Mainly I wanted to leave this review because YES the Switch is dockable. I would say you probably have to line the bottom piece up very well with the holes or you could infere with dockability. I had no issues fitting my switch into the dock and getting the switch to connect with the dock. I tried a couple other cases and this was my favorite because of the quality - many of the other cases snap on very delicately, especially for the joycon piece, and this one seems MUCH sturdier. I would also say the switch is a hard device to make a case for so I'm OK with the adhesive as it feels a lot more secure. The color is very nice, more of a sage green which is what I was looking for. I cannot speak on the removal of the case. It seems very stuck on there, which is good and bad. I think it will be possible to remove and luckily there's only a few strips of adhesive on there. If you are worried about removal I may suggest skipping the game card slot sticky piece as that one feels very stuck on there. I also like that with this case I can use the kickstand. Lastly - this isn't an issue for me, but with this case you cannot fit the joycons into the controller slider thing. Personally, I use a separate pro controller so I don't use the included joycon controller device anyways. Luckily, the joycon pieces just snap on so in the rare event that I do need to use that, I can just snap on and off the case. I do think its protective, if I were to drop my switch I could see the case potentially cracking, but would rather the case break than my switch.

It have that nice feel like Those Joycon grips you get for free Like very alike so decent Make my switch look new after the original Discolored It have Does colorful buttons but only for one pair do yea Comes two set of grips but you can only use one of them at time So You can't use the other grip for another pair of joycon The application was pretty easy I have shakey hands like bad But I got it done nicely comes with extra double sided tape incase you mess up (Tip pull the Double side tape to remove the layer) Only bad thing I didn't like it wasn't packaged for protection as the case it self not very strong when comes out the box So it could break when Delivering It Fit for an oled the New switch Scratch resistance it white so I wouldn't see the Scratches anyway It could discolored soon like the picture but I hope not

Very nice, it felt sooo great when I first put it on and held it and it makes the experience of playing the switch way better but the only thing I don’t love is the button caps can sometimes be a little bit slidy if I’m like dashing in super Mario but other than that it has a great design and is a lot more ergonomical for my hands. Great quality and worth the price. Very easy setup and an overall great product! I recommend this for all the switch owners who want to keep theirs protected and more comfortable. Some reviews say you cant dock it but you can, all you gotta do is push it in and line it up and it charges good if you get it in there. The console cover is easy to take off but the joy con covers are a little bit more difficult. And another good thing is how it comes with extra adhesive if you want to take it off and then on again. I dont think it gives you enough, but it should still work. If you want to get the BEST console i cant really help you there cuz i havent gotten them all, but this one is definitely a good one. its not super clunky and plasticy like some. Overall great product. Ps. Don’t mind the stickers I put on the dock. (See pictures)

I've had it 8 months on my OLED and I have loved it. Sadly, I noticed today that it is starting to break. My switch spends most of it's time in it's dock, it's carry bag, or my hands. I don't let children play with it, it is very gently used, so to see it is breaking... is a bit of a let down. I really enjoy how I can still use the kickstand with this case, and it feels really nice in my hands. Fits my OLED perfectly. Even after the 8 months of having it, it looks amazing. The colors are holding up, it hasn't faded and has kept it's look very well. As for protection, it's ok. I haven't dropped my switch at all. As I mentioned my switch is typically docked or in it's case or in my hand. I play for a few minutes each morning and that's about it. So... it might be protective, I haven't wanted to test it. I might get another to replace this due to it breaking on it's own.

Looks good at first until you actually use it. It’s highly uncomfortable, the buttons sink in when you put the skin on the joy cons and the silicon membrane they give you to equate for that looks terrible and feels like it’ll come off in no time. Which it did. One of the joy on shells constantly snap apart and I just put it on. The adhesive alone was a pain to work with, it kept pulling apart to where you cannot use it. Overall it just feels cheap and sad.

Overall this is a great case. Nice colors, great looks. Couple of issues with it though. One of the joycon covers were warped making it very difficult to put on the controller. The case does not dock with the kickstand cover on it. It seems like it is too big for the dock (I have the original dock not the OLED dock). Once I took off the kickstand cover it fit nice and docked without issues. I Can live with the kickstand cover on it but really wish I would fit in the dock with it on.

I’m new to switch and I got this case so it would feel more protected, and it definitely does. I feel a lot more secure when I hold it and the angled grips on the back make it much more comfortable to hold. The color is beautiful! It still fits in the docking station and my carrying case, so that’s perfect. Would recommend

Update and only a minor complaint. The buttons on the dpads are little rubber pads with a 3m adhesive. They slip off a little during gameplay. Not completely but they do move and have to be pushed back into place. I could see them just slipping completely off within 6 months to a year. The rest of the case is great. Definitely worth purchasing. Designed thoughtfully and improves grip/feel of the console. This case makes it much easier to hold and the texture of the case feels good to hold. Completely worth the money. Easy to install but you will need finger nails or tweezers for the 3m adhesive pads.

This case seems to be well made and gives your OLED Switch a clean, streamlined look. The installation of the cover is a little cumbersome as the components of it are held on with provided strips of nano tape. The tape does hold well and I understand that the thin nature of the cover requires the tape, but it's an awkward way to secure the case to the Switch. The set comes with 2 different styles of JoyCon backings. One flat and one more ergonomic. The issue with both styles is that the JoyCons will no longer fit in a controller handle with the covers in place. You will have to remove the covers if you want to use a controller style handle. Other than that issue with the JoyCon covers, they fit will and are comfortable to use. I didn't put the coloured button covers on mine because quite honestly, I don't like them. But the covers are thin enough that they don't interfere with the stock button's operation. The joystick cover is a pain to get installed but once you finally get them on, they provide extra grip and protection for the joysticks on the JoyCons. The cover that goes on the main console fits well and looks great but if you are using your console to project to a television and you are using an older version of the Switch dock, the cover prevents the console from making connection. It will work in the OLED console dock though and as long as it is fully seated in the dock, it will work. Older docks are too narrow and don't allow the Switch to seat completely. All in all, this is a great little cover that will go a long way to protecting your game console. Looks great and the price is reasonable as well.

Great product! Looks great and fits my new NS oled model perfectly despite other reviews.

I accidentally dropped my Switch OLED on a stone floor—every gamer’s nightmare. Thankfully, I had this screen protector on. Not a scratch, not a crack, and no loose parts whatsoever. Truly impressive! It was also really easy to install. I’d highly recommend this product to anyone who wants solid protection for their Switch

Bellissima anche se richiede di usare del biadesivo (incluso) per rimanere ben salda alla console. Il problema è che questa cover rende la console più spessa e non è possibile inserirla bene nella dock per usufruire della modalità tv, il che rende questa cover a mio parere completamente inutile. Peccato perché, ripeto, è davvero bellissima

Super teil. Liegt gut in der Hand. Held super. Alles funktioniert wie vorher. Sehr pflegeleicht.