AC Infinity CLOUDPLATE T1-N, Rack Mount Fan Panel 1U, Intake Airflow, for Cooling AV, Home Theater, Network 19” Racks

This exhaust airflow fan was installed last month and has been operating efficiently without any issues. The controls are intuitive and easy to use, and the fan provides strong airflow, though it can be quite loud at maximum speed. It is important to note that this is an exhaust fan and should be positioned near a vent for optimal functionality. Additionally, for effective air circulation, it is advisable to install an intake fan at the opposite end.

I have a unique guitar amp set up. I have a rack mounted pre amp going into a Mcintosh power amp. I made my own custom made rack mount so that it wouldn't take up too much room. After assembling the rig, I became concerned about heat build up in such a small space. I bought the Cloud Mount rack mountable fan and put it in the back to cool the two units. It works perfectly. To my surprise, there are many different settings. Constant fan at any speed from 1-6, a thermostat for it to go on and off when needed, and a smart setting that will turn the fan on and off or vary the fan speed. A display with the temp, fan speed and mode tops it off quit nicely. Awesome product and very easy to set up.

I currently have a rack box with the Blackmagic Design Switcher set up in it. The unit has a fan in it that may as well be as loud as a freight train. By adding this unit, cool air is introduced into the box lessening the need for the fans on the BMD device to kick on. This unit is whisper quiet, has easy to read LCD screen with temperature alarm set, fan on temperature set and a couple of other things I have not figured out yet. Have not been able to determine is this can push or draw in settings. Mine draws air into the box. I assume there must be another model that pushes air out. All in all, this unit seems well made, looks good and works perfect.

It is great to have the ability to blow the hot air out of 1U gaps between high-density high-power nodes! Really glad this product exists. The power adapter took datacenter standard line to line 208V fine. They look great too. Some wrinkles/suggestions for improvement, that's why not 5 stars: The power adapter has household current plugs, not datacenter, and is quite bulky (airflow issue in HPC). I ended up buying adapters to plug them into the PDUs but that is not ideal either, the PDUs are vertical, and the power adapters stick out more and sag. I ended up setting the speed manually because the temperature sensor is on a cable, it gets in various places in the rack, and it can't be relied upon for reproducible values. Some kind of a long stiff spine sticking out of the back would be much better. The power line pulls out easily. Good luck putting it back in a full rack when you pull on the cable just a little when working on a full rack. The nuts don't catch the thread easily and are really hard to attach in the confines of 1U space. I lost quite a few of them falling into the dark depths of the rack. Some sort of removable push anchor that requires access only from the front, with a screw only to secure it, would be much better. The 1U height is tight fit. This is a challenge even if you (re)populate the rack in one direction. Do not expect to be able fit one of these great fan strips into an existing 1U gap.

This installed into my rack easily with the temperature sensor. It detects the increase temperature and turns on as expected and quickly cools the rack down. I use this with an 8U rack for audio equipment. It is mounted in the back to pull warm air out. It isn't noiseless but compared to other units I have used it is the quietest. If you find it is running at level 6 I would suggest either it isn't mounted correctly or you need an additional unit to better circulate the air.

The unit is pretty easy to install. I like AC Infinity and have quite a few of their blank panels and wasn't aware of this 1U fan (intake) unit so decided to try. I just swapped out my blank AC Infinity 1U and popped this in. Works great, but.....it does start to get louder at speeds of 2+ but all this is relative to where your rack equipment is to your listening position. So you kinda have to choose. I didn't go/add the Outtake version because my desk/rack is open back and not enclosed. All I was looking to do was move/push air through the rack so hot air isn't just sitting/cumulating around. All said, I would purchase again if the unit fails!

If you have expensive gear, and want it to last a very long time, you must protect it from heat deaf. I see many people complain about units cutting off at smaller venues and some recording studios. This type of equipment requires 2 things in the rack.... a power conditioner and a AC Infinity Cooling System... :-) I wasn't expecting it to have such an extensive set up intellegent features, I was merely looking to keep this unit cool. I plan on buying serveral more for other rack cabinets that are nolonger in an AC controlled closet. Very pleased customer.

great product

Nicht die billigste Kühlerlösung (wird importiert aus US), aber leider gibt es - soweit ich weiß - keine ähnliche Alternativen. Wird verwendet in Kombination mit dem AC Infinity RACK ROOF FAN in einem Netzwerkschranken. Die Fan-Geschwindigkeit wird abhängig der Temperatur durch dem Cloudplate gesteuert.

At higher levels this is far too noisy and the fans have a non-standard connector, which makes switching them out for quieter Noctua fans overly complex. Which is a shame as the built in controller and general design is excellent.

サーバーラックで10GBHUBはかなり熱を持つので、熱を下げるために利用してます。静で良いです。中の温度もわかるのでとても良いです。説明書に日本語があると良いです

I have both the exhaust fan and intake fan. My rack needs it. The features are great, build is solid. My only wish is the exhaust fan is on the noisy side for a broadcast studio application. The intake is fine.

Excellente 1U Lüftereinheit.. Netzteil allerdings weniger cool - ist ein US Standard mit Adapterstecker - der jedoch sitzt nicht so fest. D.h. wenn man die leiste wie ich mobil betreibt und das Netzteil aus der Schucko Dose zieht - bleibt der Adapter in der Dose.. Abhilfe - Tape - beide zusammenkleben. Löst das Problem, ist aber aus meiner Sicht nicht optimal - zumal man Netzteile ja auch in der EU mit einem Passenden Trafo Stecker kaufen können müsste. Daher ein Stern Abzug - Über die Lebensdauer kann man hier noch keine Aussage treffen.. Wie setze ich das ein, ist als Lüfter Panel im 19Zoll Rack Case verbaut um einen Rackmixer den "Kopf" zu kühlen. Optisch sieht das Gerät top aus - Temperatur wird angezeigt, Lüftersteuerung easy.. Würde es wieder kaufen, bitte aber um ein EU Netzteil! (also der Stecker ist der Trafo)