OUTXE Magnetic Adapter Ring 2-Pack, Universal Magnet Sticker Compatible with Magsafe Accessories & Wireless Charging for iPhone/Android/Galaxy/Pixel Black

I bought a phone case that claimed to be compatible with magnetic charging, which was a joke because while it could still charge through he case, the magnetic bond was so weak that my phone didn't stay put on the charger. This ring completely fixed that problem and also allows me to put a magsafe cardholder on the back without fear of it getting knocked off. I like that this product is actually magnetic and not just a metal ring, which allows for a much stronger grip. Great adhesion despite the slightly textured case that I have. The beveled edges are also nice so you don't scratch stuff with it. I will say that the alignment guide is not super straightforward when you have a case on the phone obscuring your phone's actual dimensions, but I was able to use the weak magnetic attraction to help me align the ring and alignment card while the ring still had the plastic backing on it, and I taped the card down in the right spot for the actual placement. The lines on the card at least helped to ensure everything is centered.

I don't know how other people can say that the magsafe feature is weak, but my experience has been amazing, my magsafe wallet sticks on with great suction(?) And it will not fall off no matter how much I shake my phone. It's soo durable and its adhesive won't be coming off anytime soon As for alignment, I also had some difficulties aligning it but after planning it out, it was very easy and has satisfied me and my OCD lol and I was also able to position the ring slightly below the camera rings on my Samsung S24U so that the wallet would fit. Overall, VERY much worth the $5.99 discounted price

I would not recommend putting them on the inside of your phone case. Other than this it works okay. My phone will fall off the magnetic holder, if my car goes over any road bumps. The Manet it self is not quite flat so I didn’t want to put it on the outside of my phone case, because it would feel awkward in the hand. I do think it’s okay for the price, I think there are stronger products. But great price and does the job

I have an iPhone case that I wanted to stick to my magnetic MagSafe charger and my magnetic car mount. I first tried those cheap, thin metal rings - but when I coupled the phone to my accessories the result was a sloppy alignment and weak attraction. Then I tried the OUTXE Magnetic Adapter ring and "this ring rocks"! Now everything aligns and holds just as if I was using the phone without a case. Its simple science really - Sure, magnets are attracted to steel - but they are "super attracted" to other magnets when their polarities are lined up properly. When they attract this way they practically "snap" together with perfect alignment. I can now spin my phone around on the accssory and it seems like the phone and the accessory share a fixed pivot point. If you like the feel of quality and precision - this product will not disappoint. It also looks really nice with its beveled shape, no sharp corners and attractive factory finish. The thin, metal rings only gave me a sloppy and approximate positioning. Now I have perfection !

If ensuring your phone's complete protection is a priority, as it is for me, you might opt for Otterbox's Defender Series Case. Unfortunately, the Defender Series lacks MagSafe compatibility. The reason is clear: the case provides such robust protection that it hinders the function of a magnetic adapter ring. I tested a ring on the case's outer shell and a ring between the layers of protection without success. It only worked when placed directly on the phone's hard inner shell and connected to a MagSafe charger. However, once the outer shell was applied, the connection failed. While the product (OUTXE Magnetic Adapter Ring) is effective and aesthetically pleasing, it's incompatible with my case. I'm reluctant to switch cases since all my previous iPhones, from the 5 onwards, have remained pristine thanks to Otterbox's Defender Series. Ensuring complete protection for your phone, as I prioritize, might lead you to choose Otterbox's Defender Series Case. Regrettably, this series does not support MagSafe due to its robust protection, which interferes with the magnetic adapter ring's function. My tests with a ring on the case's exterior and between its protective layers were unsuccessful. It functioned only when attached directly to the phone's inner shell and linked to a MagSafe charger, but failed once the outer shell was in place. The OUTXE Magnetic Adapter Ring, while effective and visually appealing, proved incompatible with my case. My reluctance to switch is due to the pristine condition of all my previous iPhones from the 5 onwards, preserved by the Otterbox Defender Series.

I am successfully using these rings with iPhone 13 Pro and iPhone 11 Pro inside the following OtterBox Commuter Series cases WITHOUT permanently attaching the ring to the back of the phone. OtterBox Commuter Series Case for iPhone 13 Pro https://www.amazon.com/dp/B0C4BDHWKJ OtterBox Commuter Series Case for iPhone 11 Pro https://www.amazon.com/dp/B09G47PPJB I had to figure out best position for the ring on the back of each iPhone, THEN I used scissors to cut out a circle from the inner rubber layer of the Commuter case. The ring is NOT visible on either phone, but they both "snap" into place on a genuine Apple MagSafe charging puck. Prior to installing this ring, I had to hover each iPhone over the puck and find the charging location which was very annoying. Finding the ideal ring position was MUCH easier on the iPhone 13 Pro than the iPhone 11 Pro, because I could simply set this ring on the back of the iPhone 13 Pro and this ring would "snap" into place. For both phones, I figured out these installation steps worked well. I attached photos that will hopefully make these instructions more clear. 1. Remove both layers (hard shell and rubber layer) of the OtterBox Commuter case from the phone 2. Stick a standard post-it note on the back of the phone. 3. Place the genuine Apple MagSafe puck in the desired location on the back of each phone. 4. Use a pencil to draw a circle around the puck on the sticky note. 5. Remove the Apple MagSafe puck from the phone. DO NOT remove the sticky note. 6. Install the rubber layer of the OtterBox commuter case onto the phone. 7. Use a pencil to trace a line inside the existing circle cut-out of the rubber layer. Draw UP and DOWN arrows inside the circle that point toward the top and bottom of the phone. 8. Remove the rubber layer from the phone. 9. Remove the sticky note from the phone and cut out the large circle that you drew around the Apple MagSafe charging puck. This circle will serve as a template for drawing your cut on the rubber layer. 10. Place your cut out paper circle template on the rubber layer. Align your paper circle template with the small hole on the rubber layer. You may need to hold the rubber layer and template near a bright light when aligning these two circles. Make sure your UP and DOWN arrows are pointed to the top and bottom edges of the rubber layer. 11. Use a permanent marker to draw a circle around the outside edge of your paper circle template. 12. Use scissors to cut out the circle from the rubber layer. 13. Place this magnetic adapter ring on the back of your phone. 14. Temporarily install the rubber layer on the back of the phone. 15. Make sure the rubber layer of your OtterBox case does NOT overlap the magnetic adapter ring. Use scissors to make adjustment cuts in the rubber layer if your hole is not quite round enough or large enough. 16. Use your permanent marker to mark where you need to cut out the bottom "key" magnet that is below the circle. This took a little guess work. I removed the rubber layer, cut a little bit at a time, and reinstalled the rubber layer to check my work. Repeat until enough rubber layer had been removed. 17. When you are satisfied with your cuts, place a few small pieces of clear scotch tape on the bottom edge of the clear backing of the magnetic ring, then set the magnetic ring on your phone. Do not press the tape down yet. 18. Install the rubber layer on the back of your phone and ensure the magnetic ring is in place. Press down on the tape through the rubber ring to stick the tape to the phone. 19. Install the OtterBox hard shell over the rubber ring. 20. Test your MagSafe charger. It should "snap" into place. Enjoy! :)

A magnetic phone mount sticker that attaches to your phone for hands-free convenience, perfect for the car or home. Product Info: Universal design that works with any phone Strong magnetic adhesive for secure placement Easy to use – just stick it and hang your phone Ideal for car dashboards, offices, or kitchens No complicated setup required Key Features/Questions: Will it work on any phone? Yes, it’s designed for all phone models. Is it easy to remove? Yes, the adhesive doesn’t leave a sticky residue. Can I use it in the car? Absolutely! It’s great for mounting your phone while driving. https://www.amazon.com/Magnetic-Universal-Compatible-Accessories-Wireless/dp/B09PG57NXN?pd_rd_w=icbb4&content-id=amzn1.sym.55f2405b-2aa3-4fa1-95e2-48a0da8f4e9a&pf_rd_p=55f2405b-2aa3-4fa1-95e2-48a0da8f4e9a&pf_rd_r=YCN8RS58ECX2P4WECTPW&pd_rd_wg=YkXt9&pd_rd_r=46e85243-deb1-4551-9cfa-0aba40b6edc1&pd_rd_i=B09PG57NXN&th=1&linkCode=ll1&tag=joshuousmaxim-20&linkId=78e9b5d3cdc6b6cd12b4879d03faabdb&language=en_US&ref_=as_li_ss_tl Disclaimer: As an Amazon Associate, I earn from qualifying purchases.

This is a really thin product like I can barely tell that it’s on the back of my phone and honestly didn’t think it would have such a great magnetic with how thin it was. What made this a three star was that this is supposed to come with two but the second one had no magnets on it so I couldn’t use it on my wife’s phone so one was a dud. Makes me disappointed but for the amount I paid I should have expected it ig. But it was at least easy to remove from her phone so she didn’t have to have something that didn’t work on her phone and the one on my phone works wonders !

Love it. Perfect

Não colou no meu S25 ultra. Comprei para utilizar dispositivos magsafe sem capinha. A cola foi mais fraca que a atração magnética e o adesivo soltou do telefone.

El producto estaba perfecto pero según el pedido debería haber dos juegos de anillos y sólo ha llegado uno. Corrijo, error mío, ambos juegos estaban "magneticamente" pegados que parecía uno solo.

Die Hülle macht das, wofür sie geschaffen wurde, sie schützt das geliebte iPhone. Obwohl das iPhone 14 Pro schon recht schwer und meiner Meinung nach unhandlich ist, ist es mit der Hülle vom Grip und Handling um einiges besser geworden. Es rutscht nicht aus der Hand, greift sich vollkommen wertig an und durch die Wechselknöpfe an der Seite, bekommt man ein wenig Individualität. Auch der (ich denke einmal, dass es einer ist) Magnet auf der Rückseite hält bombenfest auf meinen Magnethalterungen. Empfehlenswert? Definitiv.

alors: "facile à plier": désolé ça ne se plie pas.... mais heureux les inventeurs de ce genre de choses ! parce que dès que vous adoptez une coque de téléphone (et ça ne marche pas QUE sur I machien évidemment) un peue solide et un peu "tout terrain".. et ben oui: l'aimant "de base" n'est plus assez puissant pour tenir le téléphone sur le chargeur sans fil.... Alors que là.... plus aucun souci.... et si l'on suit les instructions de collage: non, désolé, pour le décoler, vous pouvez y aller....