Paintless Dent Repair Tool Car Dent Puller Kit Heavy Duty Auto Body Dent Remover Glue Pulling Tabs Blue Puller

They worked real good with the right glue at the right temperature

Today I pulled a bedside dent on my 2002 Silverado with this kit on my first try. I relied heavily on Rufus and received guidance similar to this exchange:"As the dent is about 12” across above the crease, and if I put my 3” tabs inside the dent about two to three inches, the bottoms of the tabs will be about one inch above the crease. So really all I have going is an edge pull. I'll plan the next step based upon what happens."(RUFUS) That's a solid game plan — and honestly, the adaptive approach is exactly what PDR requires. Here's why your edge-pull strategy makes sense:Your setup for the 12" dent:•Two 3" tabs placed 2-3" inside creates an edge pull on opposing sides — you're working from the perimeter inward•Bottoms 1" above the crease keeps pulling force applied to the flatter area of the dent, not directly on the sharp crease lineWhy edge pulls often work better than center pulls on large creases:•Creases resist direct center force — they're reinforced by the fold geometry•Pulling from the edges "opens" the crease from the sides, letting the metal gradually relax into shapeEquipment: The cheaper version of this kit does not have raised edges on the flat plate bottoms. I used a Monvict 100w cordless gun set at 380F with reasonably priced and highly effective123PDR Amber 7/16 sticks from GlueSticksDirect. Standard 300/900 ratchet straps soft shackled to a 4X4 carport post provided plenty of pull.The panel gave up the ghost with a resounding pop that brought smiles all around shortly after I began the pull.Helpful hint: After pulling the tab, soak the surface area with isopropyl 91 and push the black centerpiece up to lift the glue attached to its surface and any that is sticking on the surrounding blue tab area. Once the dried glue is elevated, it is easy to access and pull off the tab.

Held onto the glue better than others I tried.

Great with glue pull systems.

Wash them off first to get rid of any releaser left from manufacturing. Pull super hard, you won't break these with a hustler stick. For example, it was strong enough to pull my dented door skin right off the edge of the door frame.

For me the product was a 3/5 it did not do the function of pulling the dent but I have a metal body truck I feel it would be better suited for a plastic body vehicle like the flimsy bumpers that you could use hot water on

If you think to yourself “I can’t possible make this damage worse” then this system might be for you. I’m a DIYer - far from a professional. But there was a 3 inch deep by 6 inch around dent in the rear quarter panel of my Ford Transit Van. The paint was not removed or cracked. The pros quoted $1,500 but it was not worth it since it’s likely to get damaged again anyway. It’s a work truck - the body work doesn’t need to be perfect. But I was able to use these with a 100W hot glue gun, black “Tabweld” glue sticks, a Harbor Freight ratchet strap, and a tree in my back yard to pull the dent out. I over pulled some areas and tapped them back down with a cheap PDR hammer. Looks 75% better and that was good enough for me. Note: use isopropyl alcohol to clean the painted surface and the back of these tabs each time. Let the hot glue cool down before pulling. Go slow. These won’t adhere well to unpainted surfaces or areas where the paint is in bad shape (cracks, dirt, faded clear coat, oxidation…). Watch some YouTube videos on PDR, know your limits, respect the possible outcome won’t be perfect, and you’ll be just fine.

I bought automotive grade glue sticks to adhere to this dent puller. The glue sticks amazingly well to my vehicle but does NOT stick to this plastic dent puller whenever you start pulling. I experimented with various dry times with no success. As soon as the dent is about to pull out the plastic tabs snap away from the glue, which stays adhered to the vehicle.I would not recommend.

Très facile à mettre en place, efficace pour redresser les grandes bosses.

Recomendable cien por cien por un precio más que correcto, bajo mí punto de vista lo más complicado es encontrar una silicona caliente a la altura de este producto

This kit genuinely impressed me with how well the tabs performed for the price. The tabs felt consistent and durable, and several of them provided excellent surface contact on both larger dents and more complex body lines. After cleaning with isopropyl and warming the panel to roughly 85–95°F, the adhesion was very strong and allowed for confident pulls. In fact, they outperformed some of my more expensive professional tabs, especially when paired with Brazilian or 3M glue sticks. Overall, this is a very capable kit—just test a few glue options first to find the combination that works best for your specific repair.

Come descrizione

Good value