







Review: For my Ranger, this was such a simple install PROVIDED you have the trailer tow package - Zero issues with the controller, was probably the easiest installation I've done given my Ford had all the wiring tucked behind the driver side left kick panel, literally. NOTE: this only applies if you have the trailer tow package pre-installed from the factory, if you don't the wires may not be provisioned and additional wiring may be required. Always check with the mfg of the tow vehicle and the RV dealer. I simply had to pop off the panel and the wire was there, the only thing I did was pull it up into the wiring area just below the dash, mounted the controller with the hardware there above my left knee (some say don't do it in the event of an accident, I'm going against that due to accidents will provide you with other issues), and it's far enough away and to the left I can fully see it and I don't want to be looking at it after it's set up for my trailer. Set up of the controller ..took all of 7-minutes (3min to read the instructions), after the trailer is hooked up, adjust the amount of signal being sent to the trailer brakes, do a pull test and adjust/set. These are now pretty straight forward but if you don't want to install it when you buy your trailer/RV, the dealer can do it for about $50-$100 ish. Tekonsha has been in the business of brake controller and other electronics for years, sure there are others but when it comes to stopping, I trust this brand. Review: Excelente desempeño - He cambiado un Hopkins por el tekonsha y mejoro bastante, excelente compra


















| ASIN | B001P11SCM |
| Assembly Required | No |
| Brand | Tekonsha |
| Country of Origin | USA |
| Customer Reviews | 4.7 4.7 out of 5 stars (7,429) |
| Date First Available | 6 August 2012 |
| Item Dimensions LxWxH | 11.4 x 6.4 x 21.6 Centimeters |
| Item Weight | 454 g |
| Item model number | 90160 |
| Manufacturer | TEKONSHA |
| Manufacturer Part Number | 90160 |
| OEM Part Number | 90160 |
| Outer Material | other |
| Position | Front |
| Product Dimensions | 11.43 x 6.35 x 21.59 cm; 453.59 g |
| Voltage | 12 Volts |
A**R
For my Ranger, this was such a simple install PROVIDED you have the trailer tow package
Zero issues with the controller, was probably the easiest installation I've done given my Ford had all the wiring tucked behind the driver side left kick panel, literally. NOTE: this only applies if you have the trailer tow package pre-installed from the factory, if you don't the wires may not be provisioned and additional wiring may be required. Always check with the mfg of the tow vehicle and the RV dealer. I simply had to pop off the panel and the wire was there, the only thing I did was pull it up into the wiring area just below the dash, mounted the controller with the hardware there above my left knee (some say don't do it in the event of an accident, I'm going against that due to accidents will provide you with other issues), and it's far enough away and to the left I can fully see it and I don't want to be looking at it after it's set up for my trailer. Set up of the controller ..took all of 7-minutes (3min to read the instructions), after the trailer is hooked up, adjust the amount of signal being sent to the trailer brakes, do a pull test and adjust/set. These are now pretty straight forward but if you don't want to install it when you buy your trailer/RV, the dealer can do it for about $50-$100 ish. Tekonsha has been in the business of brake controller and other electronics for years, sure there are others but when it comes to stopping, I trust this brand.
M**O
Excelente desempeño
He cambiado un Hopkins por el tekonsha y mejoro bastante, excelente compra
N**N
Reliable, Easy-to-Install Brake Controller That Works Perfectly
The Tekonsha 90160 Primus IQ Brake Controller is an excellent trailer brake controller and a great value for the money. Installation was straightforward, especially with the plug-and-play wiring harness, and the unit mounted cleanly under the dash. What I really like is how smooth and responsive the proportional braking is. The controller automatically applies trailer brakes based on how hard you press the vehicle’s brakes, which makes towing feel much safer and more controlled.  The LED display is easy to read, and the diagnostics help confirm the trailer connection and braking activity. The boost feature is also very useful when towing heavier loads because it adds extra braking power when needed.  Overall, this controller is reliable, simple to set up, and works exactly as advertised. If you’re towing a trailer with electric brakes, the Primus IQ is a dependable choice that delivers smooth braking and great peace of mind on the road. Highly recommended! ⭐⭐⭐⭐⭐
R**R
Works perfectly!
Easy install. Works great!
Y**Y
Great product with lots of hauling options and easy installation
Controller works flawlessly the way it was intended. It is very versatile with the options to choose from based on weight and amount of axles on trailer. I own a 2005 Chevrolet Silverado 2500hd and Paired with: Tekonsha 3015-P Brake Control Wiring Adapter for GM. The harness made the install a breeze and made no need for splicing wires. Was quoted $350 in Calgary for this setup that costed half and took a whole 7 minutes to install and I had to supply zip ties to keep wires from the mentioned adapter out of the way. All in all works for me and keeps my trailers braking safely at a reasonable cost.
Trustpilot
2 weeks ago
2 months ago