FENRIR Motorcycle Handlebar Bar End Mirror Adapter 801-0380 For MT09(2013-2020) MT07(2014-2024) MT10 MT01 MT125 XSR700 XSR900(2016-2021) Niken TMAX FZ07 FZ09 FZ10 FZ1 FZ6 XJ6 XJR1300 XJR1200 SMAX

I recently installed the FENRIR Motorcycle Handlebar Bar End Mirror Adapters on my 2024 Kawasaki Z900, and I have to say, they exceeded my expectations. Initially, I was worried that they wouldn’t fit or that the installation would be a hassle, but I was wrong—they fit perfectly and took less than 10 minutes to install! 1. Perfect Compatibility with FENRIR Mirrors: I bought these adapters specifically to pair with FENRIR’s bar end mirrors, and the fit couldn’t have been better. They lock the mirrors into place securely, without any wiggle or movement even during long rides or when hitting bumps on the road. The compatibility is spot-on, and it feels like these adapters were made to work seamlessly with FENRIR’s mirrors. 2. Quick and Easy Installation: I was pleasantly surprised by how fast the installation process was. I had both adapters and mirrors mounted and adjusted in under 10 minutes. The adapters screwed into the handlebar ends effortlessly, and the provided hardware made tightening everything down easy. No need for any modifications or complicated adjustments—it was straightforward and hassle-free. 3. Solid and Durable Construction: The adapters are well-built, made from high-quality materials that feel sturdy and long-lasting. They have a premium finish that matches the mirrors perfectly, giving my bike a clean, integrated look. After several rides, I’m confident they’ll hold up over time without any corrosion or wear. 4. Secure Fit and Vibration Reduction: One of the concerns I had was whether these adapters would hold the mirrors steady at high speeds, especially on highways. But once installed, the mirrors stayed rock-solid, with no loosening or vibrations affecting the clarity of the rear view. The adapters ensure that the mirrors are perfectly aligned and don’t budge, giving me peace of mind during every ride. 5. Affordable and High-Quality Solution: For anyone looking to install aftermarket mirrors, these adapters are a must. They provide a secure, precise fit at an affordable price, and the ease of installation makes them a no-brainer. You get a high-quality, durable product without breaking the bank, which is a huge plus. Final Verdict: The FENRIR Motorcycle Handlebar Bar End Mirror Adapters are the perfect addition for anyone using FENRIR’s mirrors. My initial worries about fitment were completely unfounded—they fit perfectly and only took about 10 minutes to install. If you’re upgrading your mirrors, these adapters are a must-have. Highly recommended!

Fit perfectly. I did reuse the original handa bolt it was a better fit. This is the adapter you need for the 2025 Honda Rebel 1100.

Works. What can I say? 🤷🏽‍♂️. Easy install. Don't think about it, just buy it if you need it.

If you want to save money and get these instead of the RhinoMoto ones, do that. Quality material with no complaints. Installation went smoothly with some loctite. Any bar end mirror that you are able to open the clamp all the way on, will work for these adapters.

They appear to be of good solid quality but didn't fit for my use so I returned them

Wanted to put bar-end mirrors on my '26 Aprilia Tuono 660, and needed caps like these to replace the OEM bar-end weights. Get some fender washers that will fit inside these caps. I needed to stack two washers inside the throttle side, so the grip would turn freely. Didn't need any washers on the clutch lever side.

This comes with a plastic spacer for the Hayabusa gen 3. The spacer needs to be 1.5x longer and made from cnc metal like the adapter is. Otherwise the plastic spacer crushes against the grips making them bunch up. The stud ends up being to long since the spacer is t long enough which then in my case became gauled into place making it almost impossible to remove. Having to buy a magnetic induction heater for $189 to heat up the bar to expand to hopefully get the stuck stud removed. I was hopefully able to remove most of it but it’s stuck now with about 3/8 stuck in the bar. Only thing I can think of is when fighting up the stud the first time that the stud ended up cutting new threads in the bar which then left shavings in the bar locking up the stud. What a pain im the butt and expense to remove. Do not recommend since it’s a plastic spacer not cnc metal. If you use this then order separate shorter 10mm Allen head studs.

Great option for Yamaha bars to accept standard 7/8" (22mm) bar end mirrors. I bought some round mirrors and was going to return them when they didn't fit but I couldn't find anything for Yamaha's 28mm bar ends. These give me lots of options now. Super easy to install, just screw them in. They do feel quite a bit lighter though.