Red Devil 4166 7-Inch Soft Grip Stainless Steel Scrub Brush

Good, soild brush. It has stainless steel bristles, and thet are molded into the plastic for a secure fit. I use this as a BBQ grate cleaning brush. Works great. After about 4 yrs it will loosen up, and will need to be replaced. Overall it's a great brush, highly recommend!

It scrubs moss off concrete, at least I do when I use it. I followed a fellow customer's suggestion of applying hot melt glue to the base of the wires--it was easy to do and my brush continues to look new, with no wire bristles damaged in use. Reasonably priced. I used a handle I removed from a broom or a mop, it works well. The size is good, if it were larger it would be harder to apply sufficient pressure to remove moss. Recommended!

This Red Devil wire brush removal moss from our aggregate driveway 8-12 times as fast as the pressure washer. Brushing is more labor intensive than the pressure washer, but not 8 times more. Also, the pressure washer on aggregate tends to throw bits of wet muck a long way. If there is anything within 10 feet, plan on extra cleanup with the pressure washer. I also tested the "Aquatix Pro Heavy Duty Pool Brush", but its wire bristles were too soft to remove moss from aggregate. While it is better than everything else I tested, I took off a point because the Red Devil wire brush lost bristles until I used a heat-gun and hot-melt glue to secure the bristles. Pro: - Removed moss from aggregate 8-12 times as fast as the pressure washer. - Much more uniform moss removal. The pressure washer tends to leave streaks like someone was scribbling on the driveway. - Doesn't throw muck like the pressure washer. Con: - Bristles were too close together and tended to clog up. - Bristles were softer than the stuff wire hand brushes I use when removing rust. My stiff wire brush works really well, but requires being on hands and knees. - Bristles fell out until I secured them with hot-melt. To secure the bristles: 1. Turn the Red Devil wire brush so the bristles are up. 2. Use a heat-gun to warm up a section of the brush and bristles. 3. Use a hot-melt glue gun to put a puddle of glue where the bristles attach to the base. 4. Work the hot-melt glue around the bristles using a stick and keep the glue flowing with the heat gun. 5. Repeat a section at a time. Just spend a few minutes. The bristles that are easiest to access are also the ones at most risk of falling out, so don't worry about the ones that are hard to work on.

Does as intended. Very stiff and nice grip.

Used to prepare wood deck for resealing after a long lapse. Takes some effort but it works. Use with threaded broom handle. Better than getting down on hands and knees with sandpaper.

This is a very well designed and constructed wire brush product. I've been using it as both a hand brush and with a broom handle. It's holding up extremely well. The stainless bristles are very durable, with the correct density of bristles and they are held into the brush extremely well. The plastic brush head is very durable and high quality. I've been working it hard and it's performing better and holding up better than others I've used. This is a "go to" for me now.

Bought this to brush sand and gravel off a bunch of filthy gritty sandy firewood logs. With our new weather paradigm the firewood log supply is a whole lot dirtier than "back in the day". I hand sharpen my chains on sight and the cleaner the log the less time I need to spend sharpening. A dull saw is a dangerous saw, an abused saw and a waste of time and energy! Plus chains dont last forever in regard to sharpening wear and tear and they have gone up quite a bit in price. I leave the brush outside by my log pile without worry for rust and rotting. It also has threaded holes for a handle which I imagine would be handy for some other applications!

Who in the world designed the top and bottom of the handle? There's a gap right in the middle, and it puts fingers into a channel that causes pain over time. Why not a solid handle for goodness sake? And maybe a thumb thingy so your hand doesn't slip forward on the handle??? Crappy design.

These brushes work very well, are very easy to use

Solid handle would make it 5 star but overall good product.

A escova tem boa empunhadura, é resistente e bonita.

Works well for removing loose and flaking paint. The scraper on the end is a nice touch but not as effective as a dedicated tool. Handle not uncomfortable for me.

I used this brush to remove moss from rocks in the rock garden & in the lake. Very tough brissel brush made with steel Brussels. Highly recommend.