E-Z Fletch Mini

It works really well, just be sure to clean all the glue off of it so the moving pieces do t get glued together

I need the large not the mini but this is really nice too , I will order the large full size now and just have both best fletching jig out there!!

Does the trick, probably should be cheaper as it’s all plastic. Clean your arm hinges or they’ll glue shut after you’re done.

If you're a beginner or even experienced at fletching your own arrows this thing is fool proof.

So far I love the new jig. Definitely cut down on time, easy to use, and the helical has been consistent.

Very nice and quite simple to set all 3 vanes at once. Accuracy is good. I glued blazer vanes on 4 arrows and have been shooting them for awhile, probably 100 times each. Absolutely no failures or loose vanes! Accuracy is as good as any arrows I have used in the past. I fully intend to fletch my hunting arrows with the EZ fletch for this falls hunting.

This is a very simple but extremely effective tool for fletching you arrows.I can fletch a ½ dozen arrows in no time.This has a very aggressive helical, and I must say it really has tighten mine & my sons groups.Our groups have been getting so tight that we have to re-fletch quite a bit because we will shoot through the vanes, even bust some nocks.Tip: For keeping excessive glue form getting on the jig, and a Good set.1. Place Glue on vane firstI use and Old “Super Glue bottle” refiled with G5 Blu-Glue that has the brush. Dab and spread evenly2. Then place vane in jig3. Hold jig on with your hand on the counter, using a finger to pry the arms apart to insert nock end of arrow.4. Twist close & place cap.5. With G5 Blu Glue I leave clamped for 90 second then remove.G5 Blu Glue:http://www.amazon.com/G5-Outdoors-Llc-54410-G-Lock/dp/B0001M4C06/ref=sr_1_sc_2?ie=UTF8&qid=1423253108&sr=8-2-spell&keywords=blueglue

On the plus side, this jig makes applying vanes super quick...when it works. Three vanes at once...when it works.The problem I have is that it doesn't work that well for me. I am not new to applying vanes, but I struggle to get all three vanes to adhere correctly. Plus, even though I only use the small amount of glue recommended by the vane manufacturer, the slots on this jig keeps getting crusted over, creating odd pressure points between the plastic of the jig and the rubber of the vanes. As a result, the jig does not consistently apply pressure to the vanes, and sometimes even pulls them off when opening the jig up. I have to routinely scrape out the residue, or use acetone to clean things off...and with the added time I have to spend on maintaining the jig, I could probably applied three vanes using a normal jig.That all said, I love the idea of this product. And when it does work...it is a true treat to use. But when it doesn't work just right...it is a pain.