RGBZONE WS2812B WS2811 SP108E WiFi Controller DC5V~24V, Support WS2811 WS2815 WS2801 SK6812-RGBW WS2813 SK9822 etc Almost LED Strip Module Light iOS/Android App Control AP Mode/STA Mode, Suit Indoor

Very easy to use has a lot of different pattern options I'm running it on ws2812b led strip the app on my phone was OK to set up to overall have had no problems

Super good (for now) A little weird to set up but nothing crazy. Will update soon.

Bought 3 units for separate configurations. Literally all of them have issues. App is super hard to connect and won't connect to a primary network, so you have to use your phone to switch to the device local 2.4 ghz network.. but goodluck telling the 3 devices apart. App doesn't consistently control the LEDs. Worst thing is the LEDs constantly go in and out of the sequence that they are in by default into spasmatic light flashing. I've set this up in my work area for a next level ambient experience, instead I'm being triggered with near epileptic seizures. I will be looking for a new control unit that is much more reliable. Too bad I can't return these now, even though I'm just a few days outside of the return window.

I’m happy with the unit but there are a few gotchas you should know about. Wiring was very straightforward from my DC 24V 15A 360W power supply and then out the DAT and GND lines. I’m using 22AWG wire to power the SP108E and the same wire for the data line for this entire 72 feet of WS2814 RGBW LED strips. I am running the data line in series so that the whole thing is one giant segment. I am running 12AWG from the PSU for the 24V+ and 24V- and this is run in parallel and each 12 foot LED strip (I cut the 24 footers in half), gets the V+ and V- from the trunk using 18AWG wire. Everything works great. The only issue I have is with the LED Shop app which does not provide an option for the WS2814 and the only option that makes it work is the SK6812_RGBW. With that selection, the red, green, and white colors look great but in order to get blues I have to tweak the sliders for hue or tint. Overall though, this was a fun project and it looks great. I’ll come back and add photos once they are installed. For now, here is a photo of my home made ABS enclosure. Not perfect by any means but functions quite well. Photos show a work in progress, I’m waiting on some 12AWG fork spades.

This is not easy to connect or mine isn't working. You guys should have a step by step video tutorial on how to connect the wires to the different LED strips and how to connect your phone to the app because nothing seems to work with mine.

When it works, it has some nice patterns and ability to generate patterns. But it needs your home wifi to work and it disconnects often. A sneeze and requires time (and patience) to reconnect. Should be bluetooth and have audio like many other controllers out there.