Venom Motorcycle Stand Lift, Front & Rear Combo, Universal Paddock Lift Stand, Front Wheel Fork Stand Rear Wheel Swingarm Spool Stand, Compatible With Most Yamaha Honda Kawasaki Suzuki BMW Motorcycles

Stand shipped faster than advertised. It was very easy to assemble. Lightweight but feels sturdy. Fairly adjustable, the springs are a nice touch adding to stability. Size is good, works with all of my bikes I've tried so far. I wish it came with paddle type arms as well. I would have rather paid a little more to have them included instead of ordering them separately. My only complaint is I was missing one of the small bolts that locks the adjustable arm in place. I'm sure it was just a fluke. I contacted them and they offered me a 10% but I asked them to just send me a replacement bolt instead and they sent it out to me quickly. This stand came recommended from several people online and all in all I agree. I also recommend this stand. It's a good value and works well.

Fast shipping arrived before what it said. Great quality. Easy to assemble. Makes maintenance especially chain cleaning 100x easier. Workes great on my aprilia shiver 750

I was looking for cheap but good quality motorcycle lifts. Being that it is 2023, I assumed that Amazon should have some good quality lifts from overseas. Sure enough, they do! I've a 2002 Kawasaki ZRX1200r - about 475LBS dry - and these lifts seem to lift it without much concern from my end. They assemble very simply, but snugly. The tube steel is strong for the task and overall looks good and is well designed. One problem - not all spools and bikes are the same. BE SURE to FIRST slowly fit the rear lifts on/around the spools, making SURE that the brass "claw" wont touch anything other than the spool. I made a mistake by trusting the hooks themselves, and it scratched and took some paint off of my aluminum swing arm. That sucks, but things happen. I subsequently took some Gorilla tape and wrapped them up. Seemed to work well the first time, but will probably have to apply it again moving forward. So, overall a good value for the money. Look and work well - be careful to wrap the brass so you don't scratch your baby :)

I was searching for bike stands for my 2015 GSX-S750 and seen so many comments that say they are unstable, and cheap, but I figured I'd give them a chance because I didn't want to spend a ridiculous amount of money on something that's the same quality but a brand name. After receiving them I brought them to the garage and assembled them. Assembly was quick easy, and after assembled they appeared sturdy. Anyone with a motorcycle should have already known the stands dont come with swing arm spools, so that wasn't an issue with me, and bought a set here on Amazon. After assembling them I tried them out and they worked perfectly and bike was stable the whole time. So far the Venom bike stands was a perfect buy for me.

I can only attest for rear stand, as it turns out, my front forks are not even and I needed a triple tree and didn’t know (talking to you gen 3 Sv650) but I kept it anyways for future endeavors. I think it’s a deal for the price. My bike got knocked over by another bike while on the stand, and it bent it a bit but was able to be bent back and still works just fine. I’d almost worry if it was more rigid, as it might have damaged the bike, but do with that what you will. It’s not the most top the line stand out there I’m sure, but it does the job just fine if you’re on a budget! Forewarned, it comes pre scratched a bit. There is a little note that says it’s because they assemble them in factory for QC, then repackage. Doesn’t bother me.

Works well! The from one is hard to mount but back one is good

These really are solid. No movement when lifting my R9.

I purchased these to use on my 99 Kawasaki ZX7R. I read the reviews (of which most were terrible), and decided to give them a shot, anyway. My bike is stripped down, so I wasn't too worried about dropping it. I'm doing repairs for a fall already. First things first: This thing is nowhere near perfect. If there was a jig for welding these, it's never been set correctly. A few things are a millimeter or two off, which upsets things later on. Same deal with the fork mounts. They aren't level. (Side note: there was a level packaged with mine. Why, I don't know. Did anyone else get one?) I had instructions with mine. They were pretty simple, but did leave a bit of a need for deciphering. The main gripe about that, is a need for torque specs. These things wiggle and wobble unless you tighten the bejezuz out of them. If you have a welder and don't mind the work, weld the arms to the main handle. It'll be a much sturdier unit. If you don't want to do that, tighten the bolts until you just about start to bent the piping from the torque. Not the best way to do things, but that tightens up the wobble. The front stand is wide enough to fit around the front tire and brakes, but the fork mounts don't adjust wide enough to clear much at their widest setting. I had to do some finagling to get it to work. There should be a 4th adjustment hole. The attached pictures are how they sit on the front of this bike without adjustments. For me, it did its job, and doing it well enough. If you're willing to do some work to get them right, pick these up. If you want something perfect out the box, go ahead and get some Pitbull stands. I'm a cheapskate, so these were perfect for me. Lol.

Love it!!! Motorbike lofts in stores are so expensive. This works great. Strong product

Easy to assemble, quality metal product and nuts and bolts. Well constructed and machined, hard plastic on reverse to protect your flooring. Lifted my Kawasaki Vulcan S cruiser easily (weighs 500lbs). Very stable - safe and secure for working on the bike or just having it off the ground in the winter. Great deal - I will look for more Venom products. I would not hesitate to recommend this product or buy from this company again.

It works well, solid set, doesn't feel flimsy, could lift my 2004 gsxr 750 without issues, assembly not complicated but they put a sticker to tell you what side goes where on the wrong side, just an assembly distraction. Maybe not as sturdy as a one piece stand but it is more affordable and it works.

Easy to set up, and they work amazing! Used on a 2006 CBR600RR

Been using them for over a year, quality stands.