VIVO Universal VESA Mount Adapter for Tablets, 2-in-1 Laptops, & 15.6 inch Portable Monitors, Max VESA 100x100, Adjustable Laptop Holder, Black, MOUNT-UVM02

Just what I needed for my portable extra screen. The screen didn't have a mount so this worked perfectly with the Vivo arm to mount the screen on the wall for my couch desk. The mount was easy to install and the screen doesn't move around. The clamp holds well.

This solvevd the issue very well. Needed a setup like this because my new 15.6" screen had no VESA mounts. Works perfectly. I even had the same brand VIVO as a rack. All's well in computer land!!!

As far as I know, this is the only readily available VESA mount for portable monitors. In my search across retail websites I couldn't find another at the time I purchased this. I have several VIVO items in my home (TV mounts and stands) and while none are incredible quality they have always done thier jobs as expected. So far, this item is no different. This monitor mount is made mostly out of plastic (the arms and clamp mechanism are plastic). The only metal is a thin sheet that wraps around the back of the plactic clamp. This is where your adjustment screws and your VESA mount would marry with the clamp so adding metal there was a good decision on VIVO's part. The little feet that hold your monitor are padded so there isn't much worry about this clamp scratching the surface of your monitor bezels. The weight limit is 5.5lbs according to the manual that came with the mount. I am using this clamp with a Lepow portable monitor. The face of my monitor measures just shy of 9" tall. This VIVO clamp opens just enough to fit this monitor. If you have a monitor that measures 10" tall I don't think this would work for you. My monitor came with a built in stand....I had to remove the stand from the monitor before installing it in this mount in order to keep the monitor's ports accessible. I wanted to mention this in case anyone else had the same monitor. Basically this mount is like a bigger version of a clamping tablet holder. Tension from the clamp is what is holding your monitor in place. There are a couple of thumb screws that you can tighten down on the back of the mount to further secure your monitor in the mount. Be careful to not pull on the edges of your monitor when using this, though. I was attempting to adjust my screen to avoid some glare when I almost pulled the monitor out of the mount on accident. Pulling forward on the corners of your monitor will pop it out of this mount. When adjusting the angle of your screen, adjust it by moving your monitor arm directly instead. I have turned my monitor vertically and this mount held it just fine in that position, also. Overall, this is doing a good job of holding my portable monitor. I would recommend it. I just wish the whole unit was metal instead of mostly plastic.

Great place for my 16” travel monitor to live when at home. Works great for a peripheral or raspberry pi monitor off to the side of a larger work monitor!

This VIVO VESA adapter is exactly what I needed to mount my 2-in-1 laptop and portable monitor. It fits securely thanks to the adjustable spring-loaded arms and thumb screws, and the low-profile black design blends nicely with my setup. Installation was quick, everything I needed was in the box, and the instructions were clear. Works perfectly with my 100x100 VESA arm. Great value for anyone looking to mount devices up to 15.6 inches!

There’s a lot to like, but it’s just not great for the Amazon Fire 10 tablet. It’s too wide to hold the tablet on “portrait” orientation, and in “landscape” orientation, there’s no orientation where the clamps won’t block at least one of the buttons or ports. I chose to put the clamp down low on the device so that the charging port is available and the buttons are not being pressed. But now the headphone port is blocked. This is probably designed with iPad in mind, and it just doesn’t qualify as “universal”. Also, I like that it’s got some heft. It’s mostly metal and is definitely heavier than I expected. I wish it was even heavier—like around 5 lbs. if you are using this for a monitor arm with a tension spring (the kind that raises and lowers), those are not designed for tablets because they need more weight to counteract the spring. If this were heavier, it would be an almost perfect way to adapt a tablet to a monitor arm.

Apparently not many tablet stands don't open up enough to accept a 14.6" tablet (Samsung S8-S10 Ultra), so I used these vesa mount clamps. This allows tablets larger than 13" (thanks Apple for that ceiling) to be attached to arms or table stands with a Vesa base. It comes with 4 screws to attach it to the base. The only complaint I have is that two of them is meant to make the adjustable clamp side (top) stay in position while you push the tablet onto the bottom clamp to put it in. I found my monitors or tablet too heavy for me to feel comfortable with the bottom clamp "fingers" too loose and let them fall forward. So I flip it upside down and if I need to take it out, I just pull up on the fingers on top. I adjust it via the now bottom fixed fingers. Those rubber padding that is on the "fingers" do come off after a while and ive lost the bottom ones (probably vacuumed them), so glue them or put some new foam down there.

This works really well. I've got this attached to a stand on my desk and my laptop pops in and out of it easily.

Exactly what I needed. I purchased a portable screen off Amazon and needed a holder which could be attached to a screen arm for my work from home set up. This item sturdy and holds the screen perfectly.

Recientemente me compre la base Vivo para dos monitores, pero no me gustaba tener el iPad tan abajo, así que compre esta base junto con un brazo y la adapte al poste de la base vivo que compre, así el iPad queda mas a nivel de mi cabeza y no tengo que bajar la vista, queda mas firme y no hay forma de que se caiga.

Cher mais pratique. Robuste et compact.

Una sorpresa inesperada. Pensado para acoger mi Galaxy Tab S11 Ultra en modo "portrait" con su funda de 400 gr (total aprox. 1100 gr), básicamente para lectura. Muy sólido. Encaje perfecto, con fácil inserción y retirada del tablet (para un tamaño de tablet mayor, ya habría que aplicar una fuerza quizás excesiva), sin ninguna acción adicional. Por cierto, la funda proporciona una adherencia adicional del tablet en las garras muy dimensionadas. Ancho total incluida la funda: 23 cm. Para un tamaño de tablet menor, siempre sería posible montar los tornillos adjuntos en el lado de la "garra" sin presión elástica. Encaja además perfectamente en un soporte Vesa. Excelente producto.

想像していたよりはしっかり保持してくれていて、また上側の爪も思っていたよりは邪魔にならずいい感じ。 もともとVESA穴がないモバイルモニタとかタブレットをアームに装着するために購入したのですが、使い勝手が悪くないし、装着し直すのが面倒になったので、VESA穴のついているモニターもこれで装着してます。