Bilt Hamber Auto Foam (5 Litre)

A very good and safe way to contactless pre wash your vehicle - definitely one of the better pre washes on the market. Bilt Hamber uses PIR (panel impact ratio) to calculate the correct mix ratio of product/water so you are always going to get good results as the mix ratio is calculated to the performance (flow rate) of your pressure washer. It is very easy to calculate, instructions are on the container or can be found online. Overall the results are very good; it is not a high foaming product as some pre washes are, but thick foam does not mean good performance. Leave to dwell for 5 minutes then rinse, all light dirt will be gone and any heavy soiling will have been softened, making it easier to remove with the pressure washer or by hand. A useful thing to do if you have heavily soiled wheels & tires with plenty of brake dust build up is to spray each wheel with your wheel cleaner before applying this product, then spray this over the top covering both wheel and tire as it will increase the dwell time of your wheel cleaner making wheel cleaning a lot easier. I’ve used about 20L of this so far on a number of vehicles and it has always performed well. Half a litre is usually enough to cover a medium sized car, so 5L does go a long way. It’s also kind to any pre applied waxes or treatment on the bodywork and will not strip or thin these out.

The difference from the Karcher supplied foam is night and day. Goes on brilliantly via the Karcher wand bottle - only used 100ml for all the car and almost went round it twice to use up. Strips the UK winter grime and salts easily - brilliant product.

Bought again as my BH snowfoam had depleted. Really good quality car snow foam which I apply via Kranzle Snow Bottle attached to a Kranzle cold pressure washer. This BH product is really great for cleaning your car BUT you need to get the ratio of snowfoam to water correct. Takes a bit of trial and error. Apply using snow foam lance at correct spray setting and leave to dwell on vehicle for 10 to 30 mins then simply spray off with pressure washer attachment. Have tried various snowfoam products over the years, Auto Finesse, AutoBrite, to name but a few but have always found BH products to be the best. Again only gripe is that the prices of BH always seem to creep up as is always the case with a superior product. This review is my own personal experience of using this Bilt Hamber Snow Foam and oothers will disagree. Thanks in advance.

The best snow foam. It is not thick, but is effective. You can see the dirt being dragged off the car with this foam. I’d highly recommend.

Not overly foamy but shifts dirt none the less. Expect good results from this brand. You don't need to use much as it has a high dilution rate

Has to be the best snow foam on The market!

I use this Bilt Hamber snowfoam by diluting 8:1 in a Monza foam lance. It goes on less clingy than some others and it does not smell of tropical fruit but when allowed to dewll and then pressure washed off, it removes enough grit, traffic film and other grime, to allow the contact wash to go ahead with much less risk to your pristine paintwork. All of my cars are coated with either a carnuba or a hybrid ceramic wax so just the snowfoam is great for a non contact intermediate wash during winter. In summer I always do a follow up contact wash using two buckets and I use this Bilt Hamber in the shampoo bucket as well. It is unly my subjective opinion but this is better than other brands of snow foam that I have tried in getting a car clean as either a foam only or a foam plus contact wash. That said, my cars are very well prepped, suface wise, because of the wax or hybrid coatings. I have even used this stuff at a 1:30 dilution as a clay lube prior to paint correction or polish plus glaze and it works as well as quick detailer or clay lube IMHO. I have compared with both 'cherry' and 'polar' products and I think this is better.

I’ve used other brands of snow foam before and had varying results. I wanted to try this as I’d seen several YouTube videos showing how good it is. I found that it does seem to remove the dirt and road film better than the others I’ve used. I must admit I do agitate the foam once on with a micro fibre mit as in the past I haven’t had good results just rinsing off the foam. I tried this foam two days ago when my car ( a RAV4 ) had been down a muddy farm track which sprayed mud all up the sides and had dried on. I gave the car an initial spray over with the pressure washer to remove the majority of the thick mud then sprayed the foam on. I agitated it with the microfibre mitt then pressure washed it off and the results were very good, probably better than I’ve got before with anything else. There seems to be a lot of discussion as to whether you should use a pre wash or not or put the foam on a dry or wet car but the above method worked for me. I’ll probably keep buying the Bilt Hamber product as it does work and doesn’t work out that expensive compared to some brands.

J'utilise le nettoyant à mousse Bilt Hamber depuis quelques semaines, et je suis impressionné(e) 🤩. La mousse est dense et adhère parfaitement à la carrosserie 🚗✨, ce qui permet de décoller la saleté en profondeur 🌟. Résultat : ma voiture brille comme jamais 🤍. Facile à utiliser et super économique 💰. Je le recommande à tous les amateurs de voitures propres et éclatantes ! 💦

高圧洗浄機のフォームガンで使ってます。 プレウォッシュとして5倍ぐらいの希釈で噴霧して、数分したら水で流すとかなり綺麗になります(さすがに全ての汚れは落ちませんが 一回に使う量は100ml程度なので回数で金額を割るとかなり安いと思います。 アルカリ性なので水で流した後は中性シャンプーでなんとなく中和してます。

It doesn’t foam much which I already knew, however, I read and heard that it is one of the best prewashes out there. I used it in my pressure washer foamer before washing and it removed practically all the dirt and dust making for a very thorough wash. Again, this doesn’t foam much but it doesn’t need to. It lifts all the dust and dirt right off the paint. This also makes for a good “in between” washes product. Merely foam on, rinse off and car looks great

Sin duda un producto realmente eficaz

Perfektes Produkt.