PIONEER A-Series TS-A2000LD2 Shallow-Mount 8" Subwoofer 700W Max

Perfect replacement for stock 4th gen 4runner. Extremely easy to install -20 mins total frin pulling the cover panel off, pullinf old bad sub, cutting off stock connectors, feeding the 4 wires into the push down connectors, securing down the new sub & stock sub-cover with the original screws, then puting the panel back on. 20 mins, a leathermam, and 2 screwdrivers (flathead to pry off panels & pull out sub and a star bit on the drill for removing/securing the fasteners) - Easy Peasy. The upgrade in sound exceeded my expectations. I wish I bought it sooner, but didnt buy it until the price dropped to $100. Looking back I would have bought at full price months earlier if I knew how quick and easy it would be to have such a great upgrade for my ol' 4runner. If you have the weird 2 ohm JBL stock system - buy this! Dont wait.

Great speakers. Replaced my OEM lower door speakers in my 2006 Ford Mustang GT. Had to do a little modification on the back side of the door panel but after that they fit nicely. Even put back on the original speaker cover and ring.

Sounds great! Factory stereo in 2002 Chevrolet Suburban Z71. Fitting is a little difficult

Delivery was quick. The item looks and feels of good quality. I installed this to replace a busted subwoofer on my truck. It fit perfectly fine. I had to cut the coonevtor and use bare wires as that was what my truck worked with. Not an issue on this speaker. I wish the holes were a bit easier to line up. Perhaps a small jig to help one person install. It had good power range. The sound was nice and deep. I recomend it for the money.

This speaker was designed to upgrade those factory systems that came with deluxe sound systems but which had relatively cheap speakers. In my case the car came with a Rockford Fosgate designed system with an 8" sub in a factory box (I had another car, 2003 350z that I bought new back in the day, Bose system, probably similar). The sub wasn't great - ends up the foam ring was disintegrated - so I got this. I planned on replacing the 2 ohm factory amp because it seemed like it didn't work well with anything because a lot of stuff was 4 ohm or higher. I think it was $100? Amazon now has discounts on things, seems like it's based on your history looking at them. When the stars lined up and the discounts were all over stuff I was looking at, I ended up buying 3 subwoofers, door speakers (3 sets), and 2 amps, for 3 different vehicles. This one was on sale and so I got it. To my surprise I saw that this speaker would be compatible with the OEM system. 2 ohm amp so you want a 2 ohm sub otherwise it'll be very quiet. To get to speaker just pop off the metal grille. This exposes 4 screws that hold the plastic ring on. Unscrew those and the sub comes off. After I got the speaker loose, I cut the factory soldered wires as close to the OEM speaker terminals as possible. I trimmed the ends off the factory wires, put them into the Pioneer's spring loaded terminals in the same bridged set up, put things back (after quickly testing that the speaker was making noise). Installing the Pioneer sub was easy. I used the same mounting holes, the same mounting ring, the same metal mesh speaker cover/protector (which is nice because I sometimes have sharp edged things in the trunk that would damage an unprotected speaker). I have no slamming system but this is definitely an improvement and lets me be a kid again. I have Pioneer 3 way 6.5" speakers for the doors and deck, and I'll probably put a smaller amp for those speakers. Right now the sub is a bit stronger than the rest of the sound system.

A perfect replacement for my 2005 4Runner woofer!.. Easy replacement, and sounds awesome!

Perfect fit for my 2011 Toyota Tundra. Easy install, and a definate upgrade from the factory subwoofer that was in place. Was on my doorstep in less than 24 hours...

I bought this subwoofer for my car, but honestly, for a Pioneer product, I'm quite disappointed. It's not as good as it should be. It sounds decent at first, but when you push it, it distorts completely, and the voice coil rattles quite a bit. I didn't like it as much as I expected.

Smooth desgn & very good quality of 8 inches subwoofer.

It's a good replacement for stock 8 Inch subwoofer in any car. Everything fit nicely to existing screw holes. The Sub is more powerful than the stock Sony Subwoofer. And I recommend you to limit the subsonic to 25Hz, below that it will vibrate more.

The product corresponds to its description, the speaker is shallow so it can be easily adapted to the factory car's low-frequency equipment. Compatible with PIONEER factory amplifier, no additional amplifier required

Having difficulty to find exactly match to my custom made subwoofer and this one fit perfectly and bass is incredibly deep and loud,not to compare to big boxes but it does what it says, very happy with my music set up,highly recommended

Tengo un Ford Mustang base 2007, agregaré estás fotos para alguien en mi mismo caso las quiere instalar, realmente valen la pena? En mi caso tengo de bocinas TS-A6880F 6x8 que recomiendo 100% igual Pioneer y apenas actualicé los SubWOOFER, tengo el estéreo de stock el Shaker 500, los instale bueno, tienes que remover los pines de la base paso como dato, el cambio que sentí al escuchar mis canciones con los nuevos, fue bueno, no fue lo que esperaba pero puedo subir todo el volumen se escucha bien, claro sin distorsionarse algo bueno que me encanto, ya no se me escucha el traqueteo jaja, una duda que me surgió fue que las bocinas originales función a 1.2 Ohms y estás nuevas son 2 Ohms quiere decir que reciben menos potencia, mucha gente lo que hace es conectarlas en si para obtener 1 Ohm y que reciba más potencia y se escuche más fuerte, pero conectadas a 2 Ohms se escucha bien, si no eres de mucho ruido, realmente no sé si sea buena idea conectar a 1 Ohm ya que puedes forzar el estéreo y dañarse, ahora no esperes mucho si tienes el mismo estéreo pero a mí gusto me parece bien ya que reitero se escucha más limpio y claro así como lo tengo sería todo de mi parte. PD- las imágenes de las conexiones son de las bocinas originales de stock no de las Piooner.