Wooden Bed Slats/Bunkie Board Solid Wood

I was a little scared after seeing some of the reviews, but this product is perfect, and it fit perfectly on my IKEA queen-sized bed. I highly recommend having someone help you install this. I did it myself, but it was very difficult, and I really wished I'd had someone there to help me, even though I am very big and strong and healthy. It's not so much a matter of strength (although that could be an issue, if you are particularly weak or frail). It's more that it will help to have more than two hands to do this, since you either have to hold the slats steady while you slide the mattress into place or you have to drop the mattress straight down. Otherwise, the planks will get bunched up or knocked down. If you are on your own, then slide the mattress into place from the side instead of from the head or the foot or you'll have no chance to succeed.I got the Queen-size for $39 through Amazon Prime. I would not recommend any bed slats ever be used on any queen-sized bed without a center support, so I think you should definitely get one of those if you don't already have one, no matter what brand of bed slats you use.

I never post bad reviews. I never get this sort of ridiculously cheap and poorly made products either!1. It is not a guarantee that it will fit your Queen bed, even if you measure beforehand. The slats are just long enough to fit on top of the frame, but also just short enough to fall through with the slightest shift in weight on the bed. Lie down? Slats fall and Hits the floor. Roll over, like I am while I am typing this review? Falls down as well.2. It's just wood you can buy from Home Depot.. with a small strip of fabric clinging each together. In fact, I think the strap of fabric makes it more complicated (see exhibit 1) since if one slightly-too-small slat falls, it pulls the rest of them with it!3. Feels amazing when the slats all old together on the bed, far superior to the box spring. However, due to the poor length, that is pretty much moot.

Honestly, this did the trick!!! We have a platform bed that needed to be reinforced. We kept our existing slats that came with the bed and the Bunkie board (the standard) which has a nice weight to them, I cannot imagine how thick and heavy the heavy duty ones are!We used these in between the existing slats and they are perfect! They fit nice they were not defective like the other reviews --yes they are unfinished but remember they are under a mattress.They work great for our memory foam mattress and queen slat platform bed. These are great if you have a platform bed where the original slats shift, by placing them in between the original slats it provides us with a solid base, since there is no longer any open spaces on the platform wood frame, this is a great and I am sure long lasting rescue for us.So happy i saw and ordered this product! Works Great!

There are many negative reviews stating the boards aren't the right length, poor quality boards, etc., but the product we received was exactly what was advertised. It fit perfectly into a queen metal frame (we ordered a queen) and spanned the width and length without issue. The boards aren't solid polished mahogany sustainably sourced by indigenous tribes of the Amazon, they're pine that is cut to approximately the thickness stated in the description. They're lashed together with a cheap piece of cloth and it works just fine to get it in place and evenly space the boards. Good buy for the price and for use in our guest room.

When i unboxed this product it seemed simple enough. But when attempting to fix it on my queen bed frame, the slats continued to fall because they didn't reach completely across. I would offer the king size for my queen bed, just to be safe,

This is actually a pretty good product, I believe it deserves 5 stars.First, it's cheap. I think $44 is really good price for a brand new slats with good quality.Second, it's super convenient. I thought I need to put them together by myself, but this slats has already connected itself with belts. All you need to do is pull it out of box and put it on your bed frame.Third, it's very stable. It can hold my queen box spring and queen mattress and 3 people on it well. It's not stable for you to stand on one of the stick, but it's stable to hold a lot of weight after you put mattress on it.

Queen - Standard: Perfect for my need. I used this to lay over my existing box spring when replacing my old mattress with a memory foam mattress (where the box spring alone would not provide sufficient support).The size was just right and all the boards were cut evenly (I recall seeing some reviews having a problem with uneven lengths).The wood has rounded edges, but is unfinished (similar to what you would find at the hardware store).Initial impressions are good. I will update if it fails to support mattress sufficiently.

I nearly returned these, but I destroyed the box they came in so I'm stuck with them. The length of each slat should be another 1/4"-1/2" longer so that it reaches both sides of the bed frame. While trying to put my mattress on the support slats they slipped off the frame ledge twice after sliding and bowing enough to fall through.It came with two pre-drilled holes for the two end slats to be screwed into the bed frame, but i had to drill 6 more holes in order to properly secure this to my bed.The wood is the cheapest possible (1" x 4") pine that came with big chunks missing out of it and stapled to some woven polyester strap along one side of the wood. It looks like something I would've tried doing when I was 21 and got my first miter saw and had a $20 budget to make an impromptu frame. If you have a miter saw and a tape measure, save yourself some time and headache and build your own bedfrom

Excellent quality. Perfect item for my Queen bed. Love the fact that slats are connected one to another thus ensuring the perfect fit.

This product is trash , the picture is very misleading I ordered this product from viewing the picture displayed hoping to get the bed frame (exact photo displayed) and headboard and I received only the slats which I don’t need and is no useless . Very disappointed and cannot return . No stars for this amazon forced me to pick 1

Works but it's squeaky that my husband and I are afraid it's just gonna give in. We resolved this by putting 2 luggage full of clothes we were supposed to give to charity underneath the bed. If it was half the price, I'll say it's a good deal but with the price I paid, too much. The reason we bought this is we got rid of our box spring since it makes our bed too high but now, we might have to buy a new box spring to help support these slats.

I had to return these because they didn't fit my queen size frame, these are exactly 60" wide and they were 2.5" too short for my 62.5" wide frame. Would have been much more helpful if the seller would have posted the ACTUAL dimensions of the slats.Condition was fine, wood was straight and unfinished, they would have been great if only they would have fit.

My bed was designed for a box spring but I've never had one. Always used some plywood pieces to support the mattress. When I upgraded to a memory foam mattress the plywood wasn't going to cut it so ordered this set of slats. Just layed them down and I was done.