







🔊 Silence the noise, amplify your vibe.
The BOSS RCA Amplifier Audio Systems Ground Loop Isolator B25N is a compact noise filter designed to eliminate high-pitched alternator noise caused by your car’s electrical system. Weighing just 113 grams and measuring 3.4 x 1.5 x 1.5 inches, it ensures crystal-clear audio by isolating ground loops in your car audio setup. Ideal for professional-grade sound systems, it requires independent grounding of amplifiers for optimal performance.



| Warranty | no warranty available |
| Height (inches) | 1.5 Inches |
| Width (inches) | 6 Inches |
| Weight | 0.17 Kilograms |
| Product Dimensions | 8.59 x 3.81 x 3.81 cm; 113.4 g |
| Item model number | B25N |
| Manufacturer | Boss Audio Systems, Inc. |
| Item Weight | 113 g |
R**K
Five Stars
It is an excellent item to reduce unwanted sound% distractions in your live telecasting
D**.
Super
Good quality audio
K**H
Plz dont buy and don't waste u r money and time
This is increasing noise instead of reducing. Plz dont buy and don't waste u r money and time.plz
D**R
Four Stars
Good enough but slightly humming still there.
A**N
Working seamlessly. Ensure that in/ot are connected accordingly.
Working seamlessly.Ensure that in/ot are connected accordingly. otherwise volume will decrease drstically
R**O
Worst product
I used to reduce humming sound of my car speaker, end up with blowing my components speaker woofer drive
R**A
Worthless
Worthlless... doesnt not work at all... wasted a lot of money and time to get this...
M**3
Ok
W**E
Listening to music is probably my favorite hobby. I went through three different home built PC's (have been building my own systems for a while now) to get rid of noise emanating from these builds i.e. Home entertainment PC based systems. This little box cleared up the noise completely. It does exactly what is was designed to do, i.e. get rid of input noise. For more details read on. I'm a PC enthusiast with audiophile taste but not their pocket. My previous system was an Amd FX-6350 CPU and a Sound Blaster X-Fi Platinum sound card for a 5.1 sound system. Two power amplifiers and 15" and 12" speakers for sub's and front and other smaller speakers for rear and centre. My FX-6350 System had no noise problems but I was dissatisfied with it's performance. I messed up my system striving to extract more performance from it. The system froze during a bios upgrade ending my MOBO's life hence the need for my new build, an FX-9590 PC. I went for an upgrade of my sound card as well. The first new system an AMD FX-9590 with a sabertooth 990fx and an upgraded Soundblaster Z sound card was working well with the exception of noise coming from the sub-woofers and to a lesser degree from the front full range speakers connected to the pyramid PA-1800X and PA-800X power amplifiers respectively. The whining static like in and out white noise morhed with a high pitched sound of a few kilohertz was unbearable especially since my new sound card was rated @ 116db S/N ratio. I tried a different power supply and video card which helped a little but the noise was still there. Bought another MOBO but the thermals of that board was too low for my new 220w tpd processor, but worked well my FX-6350. I then sold the first MOBO the sabertooth 990fx which locked up on the boot screen. I thus gave up the second MOBO which according to my research had a few successful builds with a FX9590 CPU. I sold it along with the FX-6350. I'm now down three MOBO's I have a powerful new CPU and no working system. I then purchase my final MOBO a Crosshair V formula Z and guess what the noise is back. I researched the problem on-line and tried sheilding the sound card with foil and cardboard - no significant difference. With my MOBO bios one could save various bios setting profiles, so I underclocked the machine significantly from 5.0ghz to 1.5 or 1.8 ghz. It helped but noise was still there but more tolerable but the machine's performance was significantly diminished.. Frustrated with performance I went back up in clock speed and turned off two of the eight cores, it helped but not enough. I was convinced that the problem was processor based I had no intentions of buying another MOBO. SInce Sub-woofer output is mono I used two ten band equalizers in series i.e. channel into channel and then equalizer into equalizer and attenuated everything from 300 hz and above. total attenuation 12db per channel times 4 - 48db this yielded the largest reduction in noise and I used this system for a while but in a quiet room, anyone with a keen ear could still hear the faint noise. While searching for a better solution on-line I came across a number of possible solutions and one of them took me to a device similar to this one on amazon. I reviewed the specs and especially the reviews of devices similar to this one and despite a few negative reviews after careful consideration I decided on this one. That is a decision I will not regret. My noise problem persisted for several months and could be detected in a room from a distance of twenty feet or more feet even with the volume muted on my PC. I tried a number of possible solutions which had limited to no success at all. I went through three different motherboard at a cost of a couple hundred dollars and guess what the solution was this device available right there on Amazon for less than 10 bucks. I highly recommend this product it works. I experienced no audible signal loss as some reviewers claimed but I did experience full noise loss. I think it was designed for car audio but it certainly works for home audio. Now I can put my ear to the grill of my 15's and hear no noise whatsoever with the PC soundcard volume at one hundred percent while nothing is playing. Thanks Boss audio for a great product.
J**P
Had terrible hum/whistle sound from my speakers after installing a 4way amp to power my front/rear replacement speakers. Tried everything, rewired it all 3 times, moved cables around and all sorts of youtube "fixes". Bought 1 to try out and see if it would solve the issue of my front and rear speakers. Installed and got rid of 99% of the noise. Ordered a second right away to fix the front ones now! Well worth the money!!! *Please realize just placing this in will not solve 100% of the issue if you put them in beside a power source. I placed them behind my headunit where the issue was being created originally. Behind the head unit it removed 70% of the noise in one spot and if it moved an inch, the noise was back. Moved the product around the RCA line and found FOR MY USE, before the amp away from the power line was the best location. So if not fully satisfied, move the product to a few different places before giving up.
H**T
Al instalar un Dimer en un negocio, se generó interferencia en el audio y el sonido era bastante molesto. El instalar este producto solucionó por completo el ruido generado por el dimer, así que no solo es útil para autos, sino que también se puede utilizar en situaciones externas como casas o negocios. Estoy completamente satisfecho con el resultado.
Z**E
works very well in eliminating all alternator whine and interference noise for my subwoofer in my car
Trustpilot
1 month ago
2 weeks ago