Bora Adjustable Conveyor Rollers Stand Expandable 14 to 50 Inch Table Saw Outfeed Roller for Woodworking 300 lbs Capacity Locking Casters PM-2700

because of the sturdiness, weight and quality I think this is a good product. my husband has a bad back but loves building things. I got him this so he can do carpentry work and not have to carry the heavy lumber every time he has to change the position of the wood that he is cutting. its a nice size and adjustable height. I but it together easy enough. I have not priced these so I don't know if it competitive price but I saw it and to me it seamed reasonable for saving his back.

I'm a little puzzled by the assertion that he height adjustment scratches the tape. Just turn the posts 90 degrees during assembly and the locking bolts won't contact the tape. Problem solved. Legitimate criticisms: the rollers aren't coplanar when the stand is fully extended. That's correct; every other roller is approximately 1/8" lower. This doesn't impede function in my case, but if you intend to use the rack for anything other than infeed/outfeed support, especially if you are intending to move heavy items on a conveyor line, this MAY matter. Like other reviewers, I wish that the rack could be adjusted an inch or so higher because it cannot be set high enough to be coplanar with my Bosch saw on its gravity stand. An inch of drop at a table saw's outfeed is no big deal at all, but it can matter when supporting heavy stock for crosscuts. It's a simple issue to overcome; I put some 3' long scraps of 2x6 lumber under the casters. It's quite safe because the casters Do. Not. Move. once locked. I also agree that scaling the legs' measure to final height would have been useful. In my case, it's not essential since my slab isn't level and I use the measures relative to one another and then dial in final height and level at each leg. It takes a couple of minutes.to set up, no big deal. The rack has enhanced my ability to cut large stock safely and accurately with a jobsite saw. It collapses and stays out of the way when I'm not using it. It rolls around smoothly on large casters and stays put when the casters are locked. The (inbuilt) ability to gang multiple racks together and to create 90 degree turns in a conveyor line may appeal to some, but if that's your use case, then the non-coplanar rollers at full extension may cause you to look elsewhere. Overall, I'm deducting one star from value for money because I believe the rack to be a little pricy given the limitations mentioned above. However, overall, I'm pleased enough with its sturdiness, flexibility, utility, quality of fit and finish, and footprint when collapsed to consider buying a second one.

Roller is sturdy, works as advertised and good value for the money. The only drawback I have is the max height is about 3-feet or 36-inches. This would probably be ok for equipment setup on the floor but most of my machines are setting on moving bases. This raises the machines to about 38-40 inches forcing modifications to the roller to match the elevation of the machines.

I purchased 2 of these Bora Portamate PM-2700 Adjustable Conveyor Roller stands and they work very well. The sturdiness surprised me and the rollers easily flow with moving product along the tops. I only have one gripe and that is I wish they would have made the stand adjustments higher as they barely make the correct heights of my table saw and router table. Honestly, the legs are just too short and they need to be long enough so that you are able to reach your equipment and tightly secure the legs to metal without them falling out. "An accident waiting to happen"!

Bought two of these for our production shop. Wish I had a long time ago. Works great as supplement to our heavy duty rollers for longer stock. Easy compacts and rolls away when not in use. One showed up with a bad wheel- bad bearings. The seller responded quickly and a new wheel arrived at my door a few days later. Totally blown away. Thank you so much!!! I know I will be ordering more for our box beam shop. Thanks again.

Poorly packaged, so it arrived with various dents, etc, that affect functionality. Most of the rollers don't spin freely for multiple reasons: some of the rollers are slightly bent, some of the bearings are bad, some of the bearings and bolts aren't seated or tightened down properly, and the design isn't great in general. The height adjustment is bad, the legs don't fit snugly in the guides and the max height is pretty low, below my bandsaw's fairly standard table height. The wheels are impossible to tighten on fully because the nut they screw into is recessed into the legs an inch or so. I have quite a few Bora products that have been great, so this is definitely disappointing that this is so highly flawed in numerous ways. The only reason this doesn't get 1 star is that for any similar off-the-shelf product, it would be more expensive. I'd recommend you just build your own custom roller table if you're capable and have the time vs buying this.

Very sturdy, excellent price, the size works perfectly. I wish I would have made this purchase years ago, so handy. Love it!

Just what I’ve needed in my shop. Going to order another one soon.

Pièces toute rouiller Pas stable Catastrophe

Excelente producto

Hauteur ajustable avec longueur rétractable lorsque non utilisé c'est super.

Good value

Parts all rust Not stable Disaster