WOBANE Under Counter Light, Dimmable LED Under Cabinet Lighting, 6 PCS LED Strip Light Bars with Remote Control for Kitchen,Shelf,Pantry,Showcase,Desk,Cupboard 6000K White, Timing, 16W 1500LM,9.8 ft

I really like this LED lighting kit. It gives a warm, cozy look to my space and makes a big difference, especially under cabinets and around the TV area. The brightness is just right—not too strong, not too dim. Installation was easy, and everything worked as expected. The adhesive holds well so far. It also looks very modern and clean. Overall, I’m happy with this purchase and would recommend it to anyone looking to upgrade their lighting at home

I really like these lights and I hope they last! My kitchen work area is U shaped and has no window so I need light to brighten it up. When we built the house we knew this so we did have electrical plugs placed above the cabinets for that purpose. For years we had puck lights up there and that helped but with new kits like this I wanted to update and add task lighting beneath the cabinets as well. We were able to install them easily above the cabinets as well as beneath them for task lighting, although it took a bit longer than expected. I customized the length of some of the segments with 3 pin solder less connectors or by cutting them a little shorter depending on my needs. For the upper sets we drilled through the cabinets to completely hide connectors and run lights above the cabinets that are different heights as you can see in the picture. I used the U shaped connector to run a double row of lights on the deeper cabinet above the fridge to provide enough light there. These lights provide nice even light that is so much cleaner and pleasant than puck lights. When I had puck lights the light was spotty and created shadows on the ceiling from the plants and items that are set up there as decoration. For the lower sets I used the plugs inside my cabinet above the microwave and inside of the appliance garage and we drilled through the cabinets to run connector strips and completely hide all wiring and not use the visible plugs under my cabinets. I need those plugs available for other things and I did not want to see the wires from these lights all over the place. I set the light strips inside the lower lip of the cabinets shining toward the backsplash to reduce the light spot glare on the counter and it worked perfectly while still giving plenty of task light under the cabinets. I also did not want to buy the little light diffusing tracks to put these in and mess with installing those so this was the perfect solution. It all looks completely neat and clean. The remotes were easy to match to the additional receivers so one remote controls upper lights and another remote controls lower. This way I can adjust the brightness for each separately. I have them attached to smart plugs and Alexa turns them on or off with voice command but the remote is needed to change the brightness. They are very bright when needed and have a lot of flexibility to dim them to your liking. With just a little planning these were so easy to install and I love the results!

I purchased two of these kits based on the high customer satisfaction and price. Based on another reviewer's recommendations, I also purchased a package of LED cover diffuser tracks (which @ $36, cost more than than the lights themselves!). I only needed 2-1/2 tracks for my cabinets, so the other 7-1/2 tracks that came with the 10-pack will likely be discarded ($$). Oh, and the special "nano" tape used to attach the tracks firmly under the cabinets is another $7. The tracks are nice, but not really necessary. They help to make the lights slightly less intense (the "diffusion"), but the main thing the tracks do is allow you to install the lights under the cabinets more neatly, in a straight line. Would I buy that accessory again? Probably... (especially now that the price is less), but I would order fewer track pieces. The most challenging part of the project was cutting out a small wedge where some of the cabinets meet. For my project, I only had to cut out three. I think most people who purchase these lights don't bother to cut out any wedges under the cabinets, opting instead to just route their sticky lights around each wedge (there are some photos of this posted). Since I was using aluminum diffuser tracks, I needed to cut a few wedges so the track could continue in a straight line (see first two photos of the finished wedges). It wasn't that difficult using an oscillating/ vibrating saw (see third photo). Using the advice of other reviewers, I held the lights up to the cabinet before installing, to determine if I wanted to face them down toward the counter or toward the back wall. As some here mentioned, facing the lights down does result in a more noticeable reflection of the lights (in the shiny counter), so I opted to face the lights toward the back wall. There's still a subtle reflection in the counter, but it's not quite as stark. These lights are plenty bright on their max setting so no worries about them not being as bright if you opt to face them toward the wall. To hide the power cord, I just stapled the wire under the cabinet in a couple places, and hid the excess cord behind the refrigerator on one set of cabinets, and up into a gap next to the cabinet in the other set (see the 4th & 5th photos). The whole project took about two hours, including putting some colored led lights inside the liquor cabinet. No tracks used in there... just taped the colored lights along the inside perimeter, facing toward the middle of the cabinet (facing each other), so the lights wouldn't reflect as much off the mirror in the back of the cabinet. The colored cabinet lights I purchased from Amazon as well. (See last two photos of the finished project.) After the lights were all installed, I was able to quickly & easily pair one remote to both sets of the [white] undercabinet lights. Even though they are on separate walls, they now turn on & off, dim, etc., together at the same time when I use the one remote. (The colored liquor cabinet lights use a different remote with different features.) To pair (or "match") the second set of lights to the one remote, just hold the button down on the wall-mounted dimmer about 3 seconds as instructed on the manufacturers description above, then use the remote to turn it on/off. It's now "matched" to the remote.

such a great price for a simple to install product. This is my 2nd purchase to extend lighting to undercabinet on other side of kitchen.

We've wanted under cabinet lights for a while, but we had some criteria that made it challenging to find a solution that checked all the boxes. Happy to say these lights worked for me! I'll share the products I used in case anyone is looking for something similar. My criteria: -Didn't want to drill into the cabinets -Didn't want to hard-wire, as we have an outlet in a corner that doesn't get used and the plug can be hidden easily. Not to mention, hard-wiring would be costly for how our kitchen is set up. -Wanted to be able to control remotely preferably through Apple HomeKit What I used: -10-Pack 3.3ft/1Meter U Shape LED Aluminum Channel System with Milky Cover, End Caps and Mounting Clips -Wire Covers for 2 Cords, 68in (4X L17in) Wire Hider on Wall Mounted, White Cord Cover Kit -2 Rolls Double Sided Tape Heavy Duty - 240" x 1.2" & 0.8" - Removable Nano Tape for Poster Carpet Picture Hanging Strip Rug Wall Outdoor -Accessories for WOBANE Cabinet Light Kit, 3 Pin Extention Connecter, FPCB Connecter -Eve Energy (Matter) - Smart Plug, App and Voice Control, 100% Privacy, Matter Over Thread, Works with Apple Home, Alexa, Google Home, SmartThings The channel system was for aesthetics (the reflection of the LEDs) and to protect the lights. I can easily remove the lights and replace them in the future, if needed. It comes with mounts, but I opted for heavy duty double-sided tape so I didn't have to drill into the cabinets. Time will tell how that lasts and this is personal preference. I also ran the cables down the corner of my backsplash and covered them with a wire cover, which I painted to blend in with the backsplash. I purchased the WOBANE accessory kit mainly for the extra extenders, which I needed to run under the microwave. The extenders included in the kit with the lights weren't long enough for my purpose. Finally, I bought the Eve Smart Plug, which is compatible with Apple HomeKit (as well as other smart home systems) so I can turn on the lights remotely and connect them to other scenes I use. We also attached a magnet to the remote that comes with the kit and keep it on the refrigerator just in case. In the photo, I'm using an Innr plug, which works with Philips Hue (plus Alexa, SmartThings, etc) but not HomeKit. This photo was before I swapped the plug. Installation was very easy. I used tin snips to cut the channels to fit my cabinets. It's worth mentioning that the AI summary and some reviews say you can cut the light strips, which is true, but you can't reconnect them without additional tools. So it's best to cut the strip at the end where you don't need to attach more. Overall, I'm very happy with this solution, especially for the affordable price point just over $100 at the time of writing this.

I am obsessed. My display case was so dark without these lights and I love that you can cut them. I got the 10 foot one and cut it to size. Keep in mind that you cannot use any pieces that you cut off so just fold it around a little bit to fit. Stuck nicely and I love the remote function. I also love that there are different lighting levels. I actually have mine on the lowest because my shop is so dark, but it does get very very bright if you want to! I also like how this is a warm light, a cold blue light would not have worked well, but this is absolutely perfect. Stunning. And so affordable! I was specifically looking for a plug-in one because I didn’t wanna have to ever replace batteries.

I bought these led strips for under my cabinets. Everything working great. Here are some (important) tips on installation. (Or, as the "Franz" character from SNL would say, "hear me now, believe me later". Look it up in the urban dictionary if you don't get it) First, DO NOT STICK THESE LED STRIPS DIRECTLY ON THE UNDER-CABINET SURFACE! Why you might ask? 1) You can not clean these LED strips. All electrical components are exposed. They will get dirty and it's almost impossible to clean them. 2) You will likely never get them off or adjust them without wrecking them. It is very hard to lay the flexible LED strip straight and once you stick them to the underside of the cabinet adjustment is almost impossible due to the strength of the adhesive. 3) These bare LED strips stuck to the underside of the cabinet just looks "cheap". So, take advantage of my early mistake and do this instead: 1) Buy some aluminum channels to hold the LED's and attach the channels to the underside of the cabinet. 2) Use the new-fanged 2-sided "nano-tape" to attach the aluminum channels to the underside of the cabinet. How this solves the problems: 1) The channels come with a cover/light-diffuser. So, the LED strip is inside the channel which is covered and can be easily cleaned. 2) Using the channel they will be dead-on straight. Using the "nano-tape" you will be able to easily adjust (and remove, if needed) the lights from under the counter. No holes to drill in your cabinet. This tape is very strong and the channels and LED strips are very light. 3) Looks good. The items I used which I purchased on Amazon are: These channels to mount the led strips. These fit exactly, no cutting Starlandled 10-Pack Aluminum Channel for LED Strip Lights Installation,Easy to Cut,Professional Look,U-Shape LED Cover Diffuser Track with Complete Mounting Accessories for Easy Installation This double sided tape to adhere the channels to the bottom of my cabinets. Nano Double Sided Tape,Removable Gel Grip Tape Transparent Sticky Tape,Reusable Traceless Mounting Adhesive Tape Heavy Duty for Fix Carpet Photo Poster,Home Office Car Outdoor Decor(2Rolls 9M/29.5FT) Good luck with your installation; enjoy your under-cabinet lights.

PROS: I have purchased many of these packs. I have them all over my home and have installed them for my father at his home. They look great and are very easy to get installed in almost any area. We use our over and under ambient lights in our kitchen every single day. They work amazingly and I love the warm glow and extra diffused lighting to help see during kitchen projects. The adhesive is very strong and seem to stay in place very well. CONS: I use my fish tank and my bed surround lights the least often (compared to my kitchen which is on daily for most of the day and has no problems as of yet). Recently both lights have started turning on and off whenever they please as well as changing brightness randomly. It seems to be that the little chip with the green light is not reacting to anything from the remote or even physical presses to the green lit button itself. I have to unplug it from a power source and try again. The bed will just keep strobe-lighting no matter what we do, so now that has been unplugged. The fish tank seems to be ok for a few hours at a time. This is a major bummer considering how intense the adhesive is on these strips. They were installed hoping they would be as permanent as possible. These light kits should definitely be 5 Star Rated. I am hoping the seller will get back to me with a solution to the seemingly faulty in-line light controller. I would love to find a solution and give this the 5 Stars it deserves.

No esperaba mucho por el precio, pero realmente me sorprendieron, el control funciona de maravilla y es muy fácil la instalación, solo queda ver su durabilidad, actualizare si es necesario

So I previously had these yellowish looking under cupboard lights that were dim and ... well yellow!!! Renovated our kitchen and wanted to change the lights out. Was very hesitant to purchase these as I wasn't sure they would meet my needs, so I only purchased one package. Well I was totally AMAZED on how bright they ended up being, but more importantly, how easy they were to install. Pull the tape off, connect each strip and voila!!! The lights themselves, come with a remote that you can adjust to 100%, 75%, 50%, 25% and a few other funky settings. So during the day we have them at 100% and then in the evening we drop them to 50% or evening setting. SO PLEASED with this item. And yes, I went back to purchase the second package (came in 2 days) so I could finish the look on the other side of the kitchen cupboard. Would recommend and re-order this item again and again. Only reason I scored it as a 4 star is that the package came with "U" connectors (so you can go back the other direction) but nothing for right/left angle connectors. Would recommend the COMPANY make/offer such things as cupboards are not always in a single row. Was able to curve the light bar to accommodate a gradual curve in the row.

Hasta el momento todo bien, lo instale y todo funciona correctamente, veré mas adelante si continua así y haré is comentarios.

Muy buen producto, sólo que los conectores son muy cortos

A nice enough kit to class up my original 1963 built cabinets a bit. I used and folded one of the "U" connectors to make a 90° to turn the corner, and still have bits and pieces from the kit to spare if anything fails. I'll probably never have them set higher than 50%, currently set to 40% via individual brightness up/down setting. Ran them to a smart plug to be controlled on/off via routine. Can definitely be very bright, even in daylight. Here's hoping they last!