SYNCWIRE Adhesive Phone Ring Holder, Cell Phone Grip, iPhone Ring Stand

How did I live this long without this product?! This simple little ring has completely changed the functionality of my new iPhone. I love the new phone, it has a huge screen, it has amazing cameras, and so much more. The main issue is that it's physically huge! It's massive and quite difficult to use with one hand. It's easy to hold but when it comes to typing with your thumb on one hand there's a very real risky feeling that the thing is going to slip from your hand.My wife has one of those pop things on her iPhone X case and she sort of likes it. She likes it because it makes it more secure in her hand but she doesn't like that it's plastic and not really confidence inspiring when holding it. Once she put my much larger phone in her hand and used this ring she said "order me one now". Seriously, it's that good.The back of the ring comes with a 3M adhesive circle and says to wipe clean the phone or case (and it comes with an alcohol pad which is nice) and then peel off the sticky backing and hold for 10 seconds. Well, as you can see from the picture I did more than hold it for 10 seconds. I used a vice grip to hold that sucker on there for a few minutes as tight as I could squeeze that thing. Is that overkill? Maybe, but I wanted to be sure that if this thing ever lost its hold on the phone it wouldn't be for any mistake that I made.I love that this is made of a hard metal and not plastic. As I mentioned before that is one big plus that my wife loved instantly. It really feels solid and sturdy. The ring itself rotates endlessly 360º around the base that sticks to the case allowing you to hold the phone in either hand however best feels comfortable. It's important to note that the ring does not "spin" as in fast. There is some tension behind the ring so you actually have to raise the ring at a 90º angle to the phone and gently rotate the ring gently so as not to rip the dang thing off the phone/case. I don't know if that would happen - I'm not disparaging the 3M sticky - I just don't want to test it and find out. But again, it doesn't just spin around the base like some spinner toy, you actually have to position it where you want it and it stays firm.When the ring folds down it is only very slightly more thick than the extrusion that goes around the camera housing portion of my particular case. Of course all cases very so keep that in mind. I have an extremely minimalist and thin hard case that is more form over function but still keeps the case secure and allowed for a very good adhesive surface for the 3M sticky.When the ring is extended it can be used as a kickstand for the phone itself as you can see from some of the pictures. Of course I had the phone out of the case to take the pictures but rest assured that it functions flawlessly with the phone in the case as well. I installed my ring a little south of center on the phone as that felt more comfortable in my hand to use. Even at this slightly lowered location it functions beautifully as a kick stand for the phone.Seriously, there is truly nothing I don't like about this ring. I hope that the 3M sticky pad holds firm for a long long time because this is the best thing I've bought in a long time. Well, best two thing since my wife demanded I buy her the rose gold version for her phone now too!Just buy this! You won't regret it.

I've bought these at least four or five times over the years, I love them. The adhesive is really strong, and I especially love that I can fit two fingers in the ring, which helps me keep my phone stable as I scroll or type. The only times I've had to replace them were when I was switching cases, or when they came off a silicone case (more on that below) because the adhesive can't be reused more than maybe once.Sadly, these do not stick very well to silicone, although probably still better than anything else on the market. They stay put for a couple of months but eventually come off. After a couple rounds of this happening, I decided to glue the ring to the case using sil-poxy. On the plus side, that's never coming off; on the minus side, that's never coming off 😂I've never had one of these break, and I wear the absolute heck out of them. However, my latest one did become a bit loose and wobbly over time. Rather than play chicken with a $1000 phone, I decided to go ahead and replace it. Unfortunately, since I permanently attached it to the silicone case, I had to replace the case as well 😂But seriously, love them, can't live without them. Have tried other ring holders and they all just suck in comparison!

EDIT #2: Today is November 8th, 2025. I purchased this nearly two years ago. It finally broke. For such a long time, it didn't even feel loose when it spun. This thing rocks.EDIT: It's 6/6 and this thing still has not come loose and isn't flapping about aimlessly. I don't remember if it's the same sturdiness as it was when I first bought it, but I don't care. Still working great 6 months later.ORIGINAL REVIEW:I don't know why phone rings aren't more popular - to me, they're superior in their functionality versus a Pop Socket, kickstand, or whatever else is used to substitute for the same functionality.I've tried a number of different rings over the years - MyPhoneRing, Humixx, some other rings that I can't remember but were cheap, and my top three right now are MyPhoneRing for third, Humixx for second, and this one from Syncwire for first.This has been attached to my phone case for a month now, so mileage may vary after the month mark, but so far, it hasn't come loose in the way of swiveling. That's the biggest issue with a phone ring - after some time, it becomes loose and won't stay "closed," losing the functionality of the kickstand (or at least hampering it.) So far, so good.Attaching it was easy. Just clean the surface, dry it, then attach the ring directly to the surface. Don't use anything in-between - if I recall correctly it came with a white sticker to put on your phone/case so you don't ruin the back of either, but it's not worth it. I didn't try to use it based on previous experiences and after reading a review on this one, so don't bother. If you really want to save your phone/case, buy a case with a ring/kickstand pre-installed.Otherwise, this makes for a great accessory for your phone that is versatile and can be used in many ways. My favorite is to put a hook on the dash of my vehicle and use it as a secondary device apart from the radio.I don't expect the sturdiness to stay like it is forever, but for the time being, it's great. I'll still use it regardless.

This phone stabilizer ring looks and feels like a quality product. I like the sleek, understated look. My first impression about the large ring was that it was so large that it put pressure on the adjacent finger above it. However, spreading my fingers out a little helped with this. The large ring does make it very easy to slip your finger (or even 2 fingers if they are small) in and out. One major benefit of the larger sized ring is that it works exceptionally well as a kickstand. I have mine placed lower on my phone as opposed to being vertically centered, which results in the kickstand working well for phone viewing in both the vertical and horizontal positions. The mounting button does have a sharpish top edge but I have never found it to be uncomfortable when I'm using it as another reviewer has mentioned. Since the ring is connected to the side of the mounting button, once the ring is folded back down it is very flat and smooth and slides more easily into a pocket than those with the ring connected to the top of the mounting button. I've been using this for about a month and the hinge is still holding firm. I am on my phone a lot but never use the ring as a fidget toy. At this one-month-out point I am very pleased with the Syncwire cell phone ring holder and, unless things change, will definitely purchase again.

***UPDATED REVIEW: I decided to email the company about my order & they responded very quickly by replacing my defective product. I’m really impressed because customer service can make or break a company. They asked me to email a picture of my defective product, along with some other identifying information, so I did. The response was very apologetic & sincere, letting me know they will ship out a replacement for me. I was quite surprised when it showed up at my door just a few days later! I was also surprised it was a brand new package, unopened & it’s the same rose gold color I had before.I honestly cannot fault this company on just one “bad egg” in the bunch. It’s all about the follow-up & I’m very pleased at the end result. Plus they give you a warranty that ensures your product after purchase, so you’ve got nothing to lose & I will stick with Syncwire for future purchases down the line because they did what some companies just don’t do. Offer a great product with a decent warranty, take full responsibility in the case of something going wrong with your purchase (like in my recent situation) & provide outstanding customer service, too. Thank you Syncwire for being one of the real ones!Original Review: I've had this product (rose gold color) since March 3rd (today is March 31, 2021) & truly loved how the adhesion is sturdy (plus there are replacement adhesion pads that comes with it. This product is very easy to install & I am able to remove it & reposition it on the back of my phone without any issues.Unfortunately, just today the ring holder became loose & I've done nothing shirt of take the best care of it (no dropping or spilling liquids on it, etc). I thought this was not supposed to happen, if it is great quality as I've read while researching the product. I'm just a bit disappointed, that this amazing product was useful for exactly 28 days & know I'll need to find a replacement.I've bought cheap $5-7 ring holders for my smartphone & they all lasted for at least 3-4 months. So why spend more money on a product that looses its value in less than 1 month?

It was really pretty and it stuck on my phone case very very well! However! I could only use it for about 4 or 5 days before giving up. My hand is too small, phone is too big, and I couldnt remember where I left the hinge of the ring the last time I used it. It doesnt spin easily (probably a mark on the "pro"s?) But that meant I couldnt reach the top of my phone with my very short thumbs when I was holding it normally from the bottom. I couldnt remember where the hinge of the ring was so I never remembered which side to pull from to open, so I was constantly flipping my phone over to search visually for it. I also wasnt sure how much I was supposed to open the ring to hold my phone, it hurt my fingers whether it was open just enough to slip a finger thru or all the way so that the ring rested closer to my knuckle. It was sharp or jagged, but the pressure of the weight of my phone was too much.So I think this item worked well, but it was not for me or those with smaller hands and larger phones🫠

This adhesive phone ring is a perfect size. Metal construction is Brett durable. The O ring piece has plenty of finger room. It fits perfect on the back of your phone. Allows the phone to sit up or lay down. The adhesive is Brett strong and does not slip. A must purchase. Hope this was helpful!!

My wife and I both have these on the backs of our phone cases. They are great to help keep a good grip on the device, prop it up to watch videos, or hang it on a hook. They are the thinnest (depth-wise) rings that we could find that still work well.The double-sided tape they use on these is pretty good, as long as you clean the surface well before sticking. My wife had an Otterbox with a flexible outer shell and over time the tape would no longer stick to the outer shell, so I would superglue it on when that happened. On my hard-backed Spigen case, I never had an issue. She has a hard case Otterbox now and it works great.Over time, the ring will get loose on how it spins and not stay open or in place as well, so we keep extras on hand to replace them when needed. They last quite a while though. Mine lasts a lot longer than my wife's does but she uses hers a lot more too and is not as gentle with it as I am.One other nice thing is that these are metal so they work with magnetic mounts.The biggest drawback is that you can't use wireless charging with these on the back of your device. They are too thick.We have tried a lot of different brands and types of these rings and these work the best for our needs.

Die sind zwar teuer aber dafür eine sehr gute Qualität. Nicht nur gut für Handy sondern auch gut für E-Books ! Leiern auch nicht aus.

SPEDIZIONE, IMBALLAGGIO E CONFEZIONEIl prodotto è arrivato puntuale e contenuto in un classica scatola Amazon con apertura facilitata in cui ho trovato la confezione del prodotto contenente: un piccolo manuale (anche in italiano), una salvietta di pulizia, 2 adesivi di ricambio e l’anello, il tutto contenuto in un blister di plastica.MATERIALI E REALIZZAZIONEGli adesivi sono della 3M (fra i migliori collanti sul mercato). L’anello è realizzato principalmente in lega di zinco nella parte circolare centrale adesiva e acciaio inossidabile nella parte dell’anello. La rotazione massima consentita è di 360° e oltre ruotando continuativamente (per intenderci, come un fidget spinner). L’angolazione massima dell’anello invece è di 180° ovvero, è possibile stenderlo completamente. Le dimensioni sono di 35.8 x 4.4 per un peso di 18.75 g.ESPERIENZA D’USOAvevo comprato un anello per smartphone e mi ero trovato molto bene, tuttavia la struttura centrale era in plastica e quando mi si è rotta e staccata dal resto della struttura dell’anello, non si teneva più impedendomi così di sostenere lo smartphone con una mano sola tramite proprio l’anello. Ho quindi preso questo prodotto per via dei materiali, non volevo che si rompesse nuovamente: effettivamente zinco e metallo fanno decisamente la differenza, si sente anche al tatto la differenza netta con il vecchio anello che avevo, anche per via della differenza di peso (apprezzo sia un po’ più pesante). La pezzetta per la pulizia rimuove sporcizia accumulata sul retro dello smartphone poggiandolo o impugnandolo permettendo così di incollare l’anello senza che si possa scollare. L’anello è veramente solido e la “cerniera”, se così si può chiamare è abbastanza rigida da permettermi di usare l’anello anche come stand sulla scrivania per tenere lo smartphone landscape/orizzontale e persino in portrait/verticale (dipende ovviamente da dove lo posizionate). La presenza del magnete nella parte rotonda centrale è comodissima per poter agganciare lo smartphone ai supporti magnetici della macchina o anche ad altre superfici metalliche. Veramente comodo!CONCLUSIONIFra quelli che ho avuto è decisamente il migliore: in metallo difficilmente si potrà rompere, o sicuramente non in breve tempo e la verniciatura non potrà andarsene. Anello solido, pesante e compatto. Cerniera resistente e piena libertà di movimento. Lo ricomprerò se mi si dovesse rompere, possibilità alquanto remota.

Lo uso para poder escribir mensajes, correos en fin , es mucho más facial sujetar el celular.

Followed the "mounting" instructions thoroughly and this baby sticks perfectly!(Happy to back of phone / backkof Cover & Do Not use for 12hrs!)My phone has never felt more secure in my hands 👍🏾.#iRecommend.

Além do bom preço!