ArmorSuit 6 Pack Screen Protector for Apple Watch 38mm Series 3/2/1 Anti-Bubble HD Clear MilitaryShield Film - Made in USA

I received my screen shield on time, and ironically, I just got my Applewatch. The first installation went well, but a small piece of dust caused a minor imperfection which I ended up taking off and using the second shield provided. I have a need for perfection, especially when it comes to your beautiful Applewatch that you spent a lot of money on! I installed it that same day, and it turned out great! The only problem was after a day or 2, the 2 top corners started pealing off. I tried using the liquid to reapply, but it wouldn't work. I went a few days dealing with it until it started to collect dust, and I was about to buy a new set. I forgot though that they have a lifetime warranty, so instead of buying a new set, I contacted ArmorSuit for a new set! They were very understanding, and sent me out a new set promptly. I took the risk of taking off the old shield until my new set arrived, but I found that without a screen protector, I was constantly having to clear my screen of fingerprints! The military shield not only covers the whole screen of the Apple watch, but in my opinion, it also prevents finger prints. Sure sometimes they end up on the screen, but I wasn't needing to "clean it" as often. The screen is super smooth, and this time it adhered to all corners!! It does help letting it dry overnight as you won't bump it when it's still drying. My only advice is to install it in a clean environment!! I saw a tiny little hair from my dogs that ended up on the new shield somehow, but it was so minor I didn't want to rip it off and use the last shield. I did notice though that if you accidentally push your nail onto the screen, or bump it on an edge, sadly the shield takes the hit, and causes it to have a dent. All in all though, I can't complain because it really is made of a great quality material, it looks great (it's very smooth and you can barely tell you have a protector on it!), it covers the whole screen (unlike tempered glass, and other competitors), and they have a lifetime warranty! So if your looking for a great screen protector, I would recommend ArmorSuit!! The price is great, and if you use the 2 and need new ones due to mistakes or just wear and tear, their customer service is great! They communicate with you fast, and all you need to do is take a picture of the old shield showing the problem, or sending them in an envelope after you relieve the new ones! I am very happy with this brand, and I think everyone will too. Even if you make mistakes, remember they have a lifetime warranty!! And sure, it takes 5-7 business days to get to you, but it's worth it! You pay such a fantastic price to get the shields to begin with, and with them sending you new ones if need be, you can't beat it!! Thank you ArmorSuit!!

If you can get this one correctly, it's pretty darn stellar. The reason I mention this is because it is the most labor intensive screen protector you'll probably ever apply. Takes about an active 10-30 minutes to get this on correctly. Another reviewer posted a video of their installation, and ArmorSuit has their own video, both are very similar and can be applied to the technique of application. My variation involved constant massaging of the edges. As you know the Apple watch has rounded edges, so the protector will not initially lie flat on the edges upon initial applications like most people are used to. After about 5-10 minutes, depending on how much you're able to squeegee out (the more the better) the edges start to dry and get a little stickier. At this point start messaging them down making sure you have a good edge on each side. The constant massage imo is like a squeegee and gets more liquid out to make it stick quicker. In the beginning it won't stick, just keep doing it to make sure the edges line up, but after a couple more minutes you'll notice the edges start to stay. Constantly keep massaging opposite edges to make sure it lines up right. Readjust the protector as needed, there should be enough liquid to allow it to move with a small amount of force applied. Keep going until all the edges lay flat. Keep watch of it though for about 30 minutes after as some edges may peel off again. Do not worry, just press them down again. I've applied two protectors in this fashion, took much longer than I was accustomed to (of just spray, squeegee and leave to dry), but the results are pretty stunning. Usually these types of protectors are the types that are noticeable, but this one, once applied correctly is literally invisible. I've used them for two days, no peeling so far, and feels glass like still (probably because one does not do large touch gestures on devices this small). It really is hard to tell its on besides from the texture you see when it reflects at certain angles.

It is easy to see the reviews that sellers plant. This is not one. I bought this item shortly after buying my Apple Watch. I thought it would be a simple way to protect its screen. Recently I thought about it and realized the idea of screen protectors is a huge scam. I have owned many watches in my life and none needed to be protected. Really, think about it. Since they were invented, how many watches have been manufactured? How many have shattered? The percentage must be minute. Apple has a protection plan for those unlucky few who crack the glass on their watches. It is $49 for 3 years of protection. Apple will not say how long one can expect its watches to last, because the company doesn't know! So why spend the money on a screen protector that may outlive the watch? I paid $7 for mine and received two in the package. The price you expect to pay to "protect" your Apple is a small sum. The price is actually in the time and aggravation spent applying the item! It is much more than the $7 cost and much less than the $49 Apple protection plan! Until I began applying the product, I could not understand how it could be the headache about which I read in the reviews. To begin, directions are not included in the box. The side of the box has a few sentences about application. On a piece of paper included with the product is a web address one can visit to view an edited video which clearly skips most of the time required to apply the product. Obviously the manufacturer doesn't want potential customers seeing the hell involved with its product. Buyers are sent a bottle of liquid to apply to product before applying to watch. Do NOT apply as much as is directed unless you want your fingers sliding when application time arrives. If the item is wet you are in for a long wait, so have plenty of food and water available. You could use the wait time to write that novel that has been rattling around in your head for decades... There is one reviewer who gave great instructions but I cannot in good conscience list his name because that might be construed as me suggesting one waste money, patience and time on this product. After doing your taxes, writing your novel or solving the problems in the Middle East, the solution MAY become tacky. If so, wait a wee bit longer and then use a hair dryer to get the film attached to your watch. Hopefully you didn't previously use the squeegee because if you did, it was in vain. By the way, though I watched the video for the Apple Watch, I did not watch anyone use a squeegee like the one I was sent. The corners will be difficult, so do not get the idea you are the only person who has been unable to apply this item. I believe that if many people find something difficult it is because something IS difficult! Just when you think you have the corners affixed you will notice you don't. At some point, things will look good and you will set the watch aside for twelve hours, or whatever "overnight" means. Beware of companies giving ambiguous directions for their products. It seems to mean said companies are creating a loophple allowing them to claim directions were not followed by the buyer. With my watch, I waited about 26 hours before touching it so I could be certain everything was dry before putting a band on the watch and wearing it. I DO recommend removing the watch band if you read the truthful reviews and are still foolhardy enough to think the application is easy AF. One needs as much space of the watch perimeter as possible to apply this thing, so remove the watch band!! After 26 hours of not wearing my new watch I picked it up to see two corners of this film had peeled up. I then applied more of the supplied liquid, which is likely water, and heat from my hair dryer to redo the application. I did the corners only this time, as they were the only parts not adhering to the watch face. I then waited another stretch (12 hours) before picking up my watch, attaching a band and wearing. I thought I was awesome because I was one of the few who went to battle and survived! The reviewers who commented negatively just didn't want it badly enough, but I gave it my all and the Apple Watch was now as protected as an American president or the Pope himself. Nothing would harm my watch because the screen was protected and the film couldn't be seen. Until the next day when I saw two corners with raised curves of film. They seemed very hard and solid so, though it annoyed me, I thought they wouldn't move. It had been about a week when I saw the film was lifted. I was not one of the chosen after all. The product is simply not going to remain in place. I now believe all the smug comments about this shield being easy to apply, or fantastic once one makes it through and sees daylight were made shortly after application when things seemed rosy. Amazon should not allow reviews to be written until at least a month after purchase so that customers would be able to read about how the item has performed, not about how it looks or how buyers think it will perform. My guess is that after the newness wears off, a buyer won't be as inclined to write a review as he would be shortly after receiving it. Because there were so many negative reviews about this product I decided to give it time before I commented. I am thrilled I did. I actually hope I can go change my rating to one star. No clue why I started with two. Just don't buy this product. Your watch doesn't need a bodyguard.

I've purchased other ArmorSuit products for various devices and have no problems, they are great! In fact they might be just as good if not better than those screen protectors that cost way more. With all of that being said I've had nothing but problems installing and keeping my ArmorSuit screen protector on my Apple watch. I do not believe its a bad screen protector, but rather the rounded corners of the apple watch and trying to get the screen protector to lay right around those edged. I noticed somewhere that someone had mentioned using a hair dryer to aide with the install, which I did on a very low setting, but just make sure your screen protector isn't super wet or the blow dryer will cause it to peel right up and if your not lucky it might even blow away, which is what happened to the first protector that came in this order....lol! I'm pretty sure I spent at least an hour trying to get the second screen protector on correctly and without any bubbles, once applied to your liking it's definitely a must to let it sit and dry overnight or 24hrs, which is what I did just to be safe. After waiting the 24hrs I went to put my watch on and immediately noticed the bottom left corner lifting and bubbles beginning to form on the screen, I wet my finger and the back side of the screen protector and was able to get it to stick again and all the bubbles worked out, however it's been well over a week now and the bottom left corner is once again lifting along with the bottom right and top left, bubbles are also starting to appear on the screen. I e-mailed ArmorSuit last week in regards to the above and they quickly responded offering to send me replacements and asking if I would require more spray solution, which I did need. My package arrived this morning....on a Sunday. I'm sick of looking at bubbles on my screen and a screen protector that is peeling up on the sides, so tonight I will be replacing it. My reason for the 4 stars is because I know ArmorSuit makes awesome screen protectors and are easy to apply on many devices, which I have done. I believe the issue lies in the Apples watch design which is causing the screen protectors to not work correctly...bummer, but I'm determined to get this screen protector to work and protect my little investment...lol.

I'm a little surprised that this item has as many low 1, 2 & 3 star reviews as it does, but I think the product is fantastic so I guess I'm biased. Installation was easy, not a single problem encountered, though I will say, WATCH THE INSTALLATION VIDEO. If you've never installed this type of wet install screen guard. I have done this on iPhones, many times, but I still watched it. The main things to remember: 1) make sure your hands are clean. 2) the area you use to install it in, make sure it's not dusty. 3) have paper towels (viva works well it bounty, less linty bits coming off) along with the microfiber towel when you start. 4) when you start, start by spraying the back of the shield w/ the included solution. If you want, since there are two shields to a sheet, cut it in half & put the other shield away. Then spray the non adhesive back, then your fingers. 5) carefully peel off the shield from its backing, if you sprayed too much solution, use your towel to get off the excess by letting it drip to the edges. Don't try to wipe it off! 6) let the shield adhesive side down on the screen of a powered down device, moving it around until it's where it needs to be. (Don't panic, it will slide around a lot, if solution comes to the edges, use your towel to absorb it.) 7) when you have it where you want, use the squeegee to work out air bubbles, keep your towel nearby for excess liquid. And be aware the shield WILL MOVE ABOUT when you do this, just shift it back in place. Try holding it in place while you squeegee. 8) once you're satisfied that the air bubbles are dealt with & the shield in place, you can leave it to dry a bit, 15 or so minutes until the edges get sticky & you can press them down. OR, you can employ a hair dryer & speed up the process. It takes a bit, hold the heat to the shield a little & as you do this, try to get the corners to adhere to the edges. They will continue to lift at first, eventually staying in place after you smooth them down. It's a laborious process for a beginner. But it works. 9) plug in your device or just leave it overnight to dry or "cure" (I turned my watch on, it was fine & then put it on the charger to cure) by the next morning the shield was dry & it looked perfect, no air bubbles or streaks. I barely put in any special effort, installed this while watching tv, while reclining on my chaise, in low light & it turned out flawlessly. But I've put stuff like this on before... It's been about 3-4 days and the shield is still looking good, I'll post pictures & the edges are all still wrapped to the screen nice and tight. If you want something that covers your watch screen rather than a small glass square that looks obvious, I urge you, TRY THIS PRODUCT OUT. It's easier to install than you think. Love this! **posted pictures...as you can see from the front view, the protector is invisible & crystal clear, the side view, the edges are covered, nice & tight, no lift at any edge. The feel is nice as well, smooth & your fingertips glide right over top like the actual glass of the watch. Great product!!!!

38 mm Clear HD screen protector I gave it three stars because it is a pain in the butt to install. You really can't get a decent screen protector for the watch as of right now except for this one. Someone needs to design a decent tempered glass one. Being that I can't get a screen protector anywhere else, I can't really complain. It works. It's great once it is completely installed. Issues with installation process: 1. Worked fine - Clean watch with microfiber cloth. 2. Worked fine - Spray exterior of screen protector with cleaning spray solution 3. Worked fine - Spray hands with cleaning spray solution 4. May have caused issues - Peel and spray adhesive side with cleaning spray solution. (Maybe I sprayed too much?) 5. Issues - Center and place screen protector onto watch and use applicator to press out bubbles. The solution caused the protector to become so slippery. I kept squeezing as much liquid as a could out with the applicator. The center of the screen started to stick to the watch after maybe 7-8 min. The edges would not stay down. I let the watch sit for about 15-20 min so that some of the liquid would evaporate and the edges of the screen protector could adhere more. After waiting 20 min, the screen protector was no longer too slippery and was able to stay in place so I used the applicator to squeeze any unseen bubbles and liquid. The edges still would not stay down. Waited another 15 min and then continually pressed the edges down and held it there. Finally it started to stick. As other reviewers recommended, use a hair dryer to help application so I used a hair dryer on warm and low to help set the protector especially the edges which took about 5 minutes. I let the watch sit for another hour to hour and half to help it set even more. After a couple hours and a few days it looks great. Initially I was skeptical because it didn't seem to be settling well. Now I can't even tell that it's on there. We'll see how it holds up after a few months.

I received my Apple Watch on Black Friday and wore it all winter naked, i.e. without a screen protector of any kind. I felt comfortable with that because it was usually covered by sweaters, sweatshirts, jackets, etc., so it was pretty well protected from most bumps and scratches. However, now that spring is here and I have started wearing short-sleeved shirts, being the paranoid klutz that I am, I was worried about a bump or scratch marring the screen on my beloved Apple watch. I ordered this product after reading the reviews and comparing similar products because I felt this film offered the easiest installation and best protection. In addition to being a paranoid klutz, I am also not that good at installing things, so I was a bit nervous about installing the film on my watch. After watching the video guide several times and reading the well written instructions, I gave it a try. The installation itself was very easy, and they provide all of the items (spray, lint-free cloth, tiny squeegee) you will need to complete the application successfully. After I had the film applied, smoothed, and squeegeed, I noticed there was a speck of lint underneath. Ugh! I could not live with looking at that, so I removed the film, re-sprayed it, and tried it again. This time I was able to apply the film without any lint, and there were no unsightly air bubbles either. The film covers the entire top of the watch and down the sides for a nice, smooth fit. I let it dry overnight and put the watch on in the morning as usual. I have been wearing it for several months now and the film is staying put and not peeling up on the edges. I would absolutely recommend this product if you love your Apple watch as much as I do. Now that my watch is well protected, bring on the summer!

Several yeares ago I applied an ArmorSuit Shield to an Apple iPad with great success. When I traded in my iPad for an updated model my original iPad looked good as new. The ArmorSuit screen protector performed exceedingly well. I wish I could say the same for the ArmorSuit Military Shield for the Apple watch (38 mm). First, there were no application instructions in the box, just a 3x5 inch card directing me to the ArmorSuit web site to watch an installation video. I was able to cut an paste the installation instructions from the web site into MS Word and then printed them for reference during the installation of the ArmorSuit Military Shield for the Apple watch. The Armor Suit Shield bonded with the flat portion of the Apple Watch screen but with much less success on the rounded sides and corners. Four days later I have some noticeable bubbles where the screen rounds over. There is no adhesion on two of the corners. I purchased the ArmorSuit Shield because I wanted something to protect the sides and corners. I will use the present Shield until it no longer bonds to the screen and then I will try the second Shield. If I have the same results I may revert to the tempered glass shield that I used on my first Apple Watch. I found the application process cumbersome, complicated and tedious. Update 20 November 2016 Following my less than stellar review of the ArmorSuit Military Shield for Apple Watch 38mm, I received a reply from the company giving some suggestions for better results. The suggestions looked valuable but when I clicked on the link to read the entire reply I received a message error, link unavailable. I attempted to follow the link using both a PC and an iPad; unsuccessful either way. Since the ArmorSuit Military shield was peeling off one corner of my watch I thought I would retry the application with the second shield in the box. My results were even worse the second time. Three corners peeled off within the first 24 hours. I waited for 20 minutes after installing the shield to attach the sides and corners to the rounded screen of the Apple Watch. The shield would not stick. I covered the shield with a towel hoping the weight would hold down the corners and rounded sides. I placed the top of a shave gel can over the towel and watch, thus isolating the watch. I piled a half dozen wash cloths on top and let the entire assembly sit for 18 hours. When I removed the above it appeared that the shield had stuck (plus a few bubbles). Six hours later three corners had peeled off. I have read many excellent reviews of this product but that has not been my experience.

perfect

Perfect fit for the Apple Watch - Recommended

Me gusto mucho. Cubre muy bien el reloj y dura mucho.

The best protection for your Apple Watch around. It may be expensive, but after trying the cheaper options... it's worth every penny.

Bon produit, bonne qualité.