QC3.0 Dual USB Power Socket, Quick Charge Car Charger USB Adapter for Smart Phone PDA iPad iPhone Android GPS Use for Toyota

I have a 2019 Limited and TRD OR. I used two of these in each 4Runner to add a total of 4 USB ports. These are pretty easy to install, it's very nice they can connect to the car with out cutting into any wires. I soldered both together to feed off of one 12V power port (cigarette lighter port). You just disconnect the trucks wiring at the very back of the trucks power port and connect the USB plug's wiring harness then reconnect the UBS wiring harness to the power port (like a pass through), perfect with zero cutting of the factory wire or needed to wire anything to the fuse box. My first 4Runner I connected to the power port in the center console storage compartment - this was a bit of a pain because it so tight and hard to remove the factory connector and with one hand connect everything up. The second 4Runner I connected to the power port under the stereo next the factory USB port, it's a little bit more involved from taking the 4Runner apart but much easier to hook up everything. As you can see in the pictures this looks very factory, the USB ports fit very well and nice and snug in the factory openings. The green LED's aren't overly bright at night. Overall I am very satisfied.

Put this in my 2012 Scion XB. Very easy to install and worked great. Adding this solved a lot of device charging problems that I had. I was actually using a portable battery to charge things in my car and this let me do away with the battery.

Beautiful soft green LEDs behind the charger look great. They're not overly bright either, they're a level of brightness that lets you see them but doesn't blind you in the dead of night. They connected in a virtually self-explanatory way to the cigarette lighter of my 2009 RAV4 and the fit was perfect. The AUX/USB port beside it is fairly loose, and it won't come out if it's pulled, but it feels cheap. This quick charge port fits a LOT tighter, and I'm extremely happy with this product. For about the same price as a charger that would plug in, this is a permanent solution that frees up your lighter socket for a large power inverter. I needed this ability since I wanted to power my laptop when I'll be "working from home" in my car while we are moving.

Product fit in 2011 Tacoma, but would not connect to the 12V connector. Ultimately I had to buy T-tap terminals to splice the connections. Easy to do, just took extra materials. Hardest part is getting access to the install location below the AC controls. I also "turned off" the green LED by cutting into the side of the housing with a razor blade and breaking the LED connections with a small screw driver. I then covered the hole with some electrical tape. Ultimately installation was more involved than I hoped, but the end result is great.

Got this to replace another one from another seller. The first one was narrower and only lasted about a year. Has cool green light and charges fast. Easy to install, just removed old wire connection clip and she fit right in the same hole. This one is snug and doesn’t move around. Fair price, quick delivery. So far so good.

This was described as specifically fitting in a 2007-2017 Toyota Corolla. I can honestly say it is not a good fit for a 2009. It only goes in abut halfway, and then gets jammed. Instead of being flush, it sticks out about 1/4 of an inch. I cannot figure out where it gets hung up, but the locking tabs do not make it far enough in to engage. Therefore, the only thing holding this in is friction, as I could only wedge it in the opening as tightly as possible. I didn't want to start trying to randomly shave plastic to see if I could make it fit, and end up making it worse. I will leave it as-is and hope for the best. The sockets work for providing power to the accessories in the car. I have only used one socket at a time so far, so I don't know if there would be problems using both simultaneously. Power is only provided when the ignition is turned to "Acc" or "On". When the key is "Off" or you remove it, the sockets do not have power. The green lights in the sockets show you when power is being provided, and are neither too bright or too dim. Installing the socket was not too difficult, but was a bit confusing. Disassembling the center console was the most difficult part. However, finding the correct plug on the cigarette lighter was a bit confusing, There are several connectors behind the dash, and the only way to find the right one was by trial and error. There is plenty of length on the socket to allow you to place this pretty much anywhere along the dash. Mine was replacing the "AUX" port, so it was within inches of the lighter. I had tons of excess wire to cram behind the console. In my case I would have preferred less wire, but this is helpful if you have a longer run. Considering the price, and that it was supposed to be an OEM fit, I'm a bit disappointed. It works, but it should be less confusing to install, and it should fit like a glove. If you're OK with it not being flush this is an option, but you have other choices that might fit better.

I got the dual usb-A version with QC3 and the green lights. One thing no one seems to mention about this is that these are usb-A but you can plug your cord in both ways! I've seen flimsy iterations of the bi-directional usb-A but this one actually seems sturdy enough to last. The slight increase in port thickness is hardly noticable so I suspect many users assume you can only plug your cord in 1 way and call it a day. Both ports output 18w (9v/2a). Fit was a little snug in my 2019 Corolla LE and required a little extra pressure to fit into my empty socket. Installation was simple with a few YouTube videos on how to remove the trim. Green LED is not bright enough to be annoying but it really doesn't light up anything but the inside on the port. If I don't update this, it means the port is still working.

perfect fit and fubctionality