Bed Sheet Holder Straps- Adjustable Fitted Sheet Clips Bed Sheet Fastener Suspenders Elastic Gripper Holder Used for Bed Sheets,Mattress Covers, Sofa Cushion(Set of 4)

These work well with my full size mattress. They are a bit tricky to attach so I only use 3 of the 4 straps, 2 from head to foot and 1 across. My sheets aren’t perfectly taut in the morning, but they’re MUCH tighter and more flat than without the straps. To attach the first time, I put on the fitted sheet as usual then clipped the first strap about a third of the way along the top edge of the sheet. Then I pulled the strap diagonally to the side and walked along the side of the bed to the foot. I stretched and shortened the strap to how tight I though would be ideal and then slightly lifted the mattress and slid it under the side and to the foot where I wanted to clip it, around a third of the way in from the side edge. I repeated this process for the second clip on the opposite side of the bed (from head to foot). For the third clip, I started by laying the strap on top of the mattress to gauge the right length but left it longer than ideal just so I’d have enough length to push it as far under the mattress as possible. I clipped it to the sheet around midway from the head end of mattress to the foot of it but slightly closer to the head as that’s where I get the most bunching. Then I pushed the strap as far as my arm could reach under the mattress. From the other side, I lifted the mattress and leaned under it to grab the strap. From there, I stretched and tightened the strap the rest of the way to ideal and clipped it to the sheet. After that first time, it’s much easier to detach and reattach the clips. I don’t wash the mattress cover every time I change the sheets so those weeks, I attach the clips to the mattress pad. When I do wash the mattress pad, I have spindles on my head and foot boards and clip the straps to the spindles. I leave the strap that goes across the bed underneath the mattress but it’s not to difficult to reach under and grab the ends when the sheets are clean and ready to go. Reading all the reviews where people struggle to use these clips, I was hesitant that they be a bigger pain than they were worth, but I didn’t find it nearly as challenging as I expected. Yeah, it takes longer than just putting on the fitted sheet and being done, but they save so much time every morning when I make the bed and I don’t have to retuck the sheets along the sides, head and foot. Plus the sheets look great even first thing when I get out of bed. To me they’re 100% worth the extra time and effort when I change the sheets. If these ever lose their elasticity or the clips break off the straps, I will mend or replace them for sure. I love these things! Even though they’re a challenge to use and the sheet isn’t perfectly taut in the morning, I’m giving these 5 stars because I can’t imagine anything that would be easier and have the same smoothing and tightening effects. To me, the “faults” are not in the product or their design but simply in the nature of my sheets and my slippery mattress pad.

literally the best purchase I've ever made. they're a pain to get on, but once they're on they're really not going anywhere. my partner and I toss and turn all night every night and these clips have kept our sheets perfectly stuck on since I bought them in October. and since they work so well, we haven't had to buy new ones, so the price point is insanely worth it. definitely recommend

Edit: don't recommend for microfiber sheets, material doesn't hold tight in clasp, but work as described on cotton, cotton blend excellently. Org: Love these straps! Work great! Using on a king size bed that has 3 dogs sleeping on it with me. I've tried many different straps but these really held the fitted sheet on the whole week. I put it to the connector/clasp, it gives plenty of room to get the material in it &being made of a metal material it actually holds the cloth tightly. I did 2 straps from the head to the foot length wise & the other 2 straps from 1 side to the other side, 1 close to head, the other close to the foot. My sheet didn't come off one time the whole week, I'm on week 3 of using them. I'm in bed alot due to medical issues & my dogs are jumping up on the bed multiple times throughout the day & night. The smallest is 46 lbs the biggest is 70 lbs so it's a lot of movement going on & these straps hold the sheet in place perfectly! Only negative to me is I wish the designer would figure out a way to keep the strap end staying out on edges of mattress when unhooked because they literally slide under top mattress when loose which makes it hard to find/grasp when putting new sheet on, but this doesn't affect the actual sheet holding ability. My 4 star rating is because nothing is perfect, this item is close though.

So I've used those "other" sheet holders with the fasteners (those metal teeth) and I've ruined two fitted sheets because of them. It may seem obvious, but those metal teeth that clip onto your fitted sheets can definitely rip your sheets (as they did with mine). This brand is the ONLY one I've found on Amazon that uses a different method for holding your sheets in place (and I looked quite a bit). These sheet holders have a hooking mechanism that has the sheet placed against a metal button and then the metal V-shaped hook goes over the sheet where it's covering the button and slides down to latch it into places WITHOUT ripping your sheets! I've been using them for a over a year now and have been 100% satisfied! My fitted sheets stay in great condition and it's nice and tight! The bed straps are adjustable and pretty easy to install! They're not quite as easy as the ones that just clip those metal teeth on, but these also doesn't destroy your sheets. So I'll take the tiny extra amount of effort over having to buy a new fitted sheet or a whole sheet set! I've only had one issue with one of the straps: the metal hook came apart from the cloth and makes that one unusable. I don't believe there's a way to fix that if it happens. But that literally just happened the other day and I've used these for over a year now. So I'm going to buy another set of 4 as a backup just in case one strap fails like that some time. That's the only issue I've had the whole time so I absolutely recommend this product. I bought several sets for the rest of our beds after I saw how great they worked! As a note: I do fold my sheet, at the place where it's connected to the button and hook, over itself once before latching the hook onto the sheet and button. I'm not sure if this is necessary, but I do it just to add some thickness to the place where it's connected as the connection feels a little stronger and less likely to come loose.

These are the only thing that works for holding my sheets. I just wish they weren’t made so cheap. It hasn’t been 6 months and 2 already broke. I wish the manufacturer would make them with a more durable fabric around the buttons and smelt the metal together so the fabric doesn’t slip through the slit in the metal. It would be better if the metal were thicker and not as easy to bend. Great concept, but cheap product isn’t made well. Is it because of greed? You don’t want them to last a year so people keep buying them? I’d rather pay more upfront for something that lasts years.

I can’t count how many bed sheet clips I have tried in my life. I absolutely hate loose sheets. I would find a set, use it for a month or so, throw it away and a few months later, I would try another slightly different or even very different set. . The cycle kept repeating. These are amazing. I have an adjustable bed so I can’t use these lengthwise, but since there are 4, I space them equally on the short side. Put them on and forget about them. The sheets stay in place until I remove these to wash the linens. They were a game changer for me

These have solved my loose sheet problem, and with reasonable ease. I have a king-size mattress, so there was no way I could flip it to install these. Here's what I did: I placed the fitted sheet on the mattress as usual, then attached one end of one strap about a foot down one side. Then I stretched it and pulled it between the mattress and foundation, without lifting the mattress, then fastened it on the other side. Repeat for the other three straps. It's really not that hard, and it really does keep the sheets taut without damaging them. It makes it easy to make the bed in the morning as well. Thumbs up.

I find myself delaying changing my sheets because these are so difficult to use. The problem is that you have to lift the mattress to get these in place. My mattress is a heavy latex mattress and not that easy to lift by myself. I've tried attaching them to the mattress protector while the sheets are in the wash so I can just transfer them back to the sheet when I put the clean sheet on. But this doesn't work all the time. The ends come undone and then it snaps under the mattress, and I have to lift the mattress up to get to it. And if you get one end in place but the other isn't attached yet, then the first end will often come undone because it doesn't have enough tension yet to hold it there. So, then I'm lifting the mattress again to get at it. Also, I have not been able to tighten these enough to get the sheet taut, because to get the strap tight enough, it would have to be so short that it would be difficult to pull it to the other side of the mattress to get it attached. I think the Bed Scrunchie would be much easier to use from what I have seen of the videos of that. Unfortunately, the bed scrunchie won't work in my situation because I have a Chili Pad/Ooler that I have to put under the fitted sheet and then the water tubing has to come out from under the fitted sheet at the end. The only way to make a bed scrunchie work would be to cut a hole in the fitted sheet for the tubing to go through so that the tubing doesn't get smashed under the mattress. But if you don't have that issue, then I would suggest trying a bed scrunchie rather than this. I get worn out every time I change my sheets and deal with these straps.

These are fantastic. I wish I had bought them earlier! I have a deep mattress and the fitted sheet would always slip up on the corner and get bunched up a little in the middle of the mattress. Since using these, my fitted sheet stays smooth across the top of the mattress. The clips stay on really well, even when moving the mattress into another room. They are easy to clip onto the sheet, do not slip off, and do not damage the sheet.

sturdy

It was available through Amazon. Definitely helps with keeping sheets in place.

Conforme à mon attente. Maintien bien les draps

Feel nice and stong