- Waterbased selective rust remover for steel, cast iron and chrome platings - Short-term corrosion inhibitor – Removes weapon finishes such as bluing, parkerizing, zinc phosphate, and browning within 30 minutes – Density >1,042 kg/Lt - Consumption 60 gr/Lt – Watermixing ratio up to 1:1.
- Distaccante selettivo della ruggine a base acqua per ferro, acciaio, ghisa e cromature - Inibitore della corrosione a breve termine – rimuove anche rivestimenti superficiali quali bruniture, parkerizzazioni, bluing e foso di zinco in circa 30 minuti - Densità >1.042 kg/Lt - Consumo 60 gr/Lt – Rapporto di diluizione con acqua massimo fino a 1:1.
- Selektive ablösung von rost auf wasserbasis für eisen, stahl, gusseisen und chromierungen - Korrosionsschutzmittel für die kurzfristige zwischenlagerung - Auch oberflächenbeschichtungen wie brünieren, parkerisierungen, bluing und zinkphosphat werden in etwa 30 minuten entfernt - Dichte >1,042 kg/Lt - Verbrauch 60 gr/Lt – Wassermischungsverhältnis bis 1:1.
- Agent de decollage selectif de la rouille a base d'eau pour fer, acier, fonte et chromages - Inhibiteur de corrosion à court terme - Même les revêtements de surface tels que brunissages, parkérisations, bluing et phosphate de zinc seront enlevés en presque 30 minutes - Densité >1,042 kg/Lt - Consommation 60 gr/Lt – Rapport de mélange jusqu'à 1:1 avec de l’eau.
- Removedor selectivo de óxido a base agua para hierro, acero, hierro fundido y cromaduras - Inhibidor de la corrosión a corto plazo - Eliminará acabado azulado y otros tipos de acabados de óxido como parkerizing, foso de zinc y browning dentro de los 30 minutos - Densidad >1,042 kg/Lt - Consumo 60 gr/Lt – Proporción de mezcla de agua hasta 1:1.
Product description
-------------------
PRELIMINARY DEGREASING: first always remove oil & greases by
using dedicated detergent/degreaser prior to derusting. DIP: take
a sufficient quantity of EVAPO-RUST required to fully submerse
the rusty object; then submerse it. The duration for derusting
will depend upon the severity of rust: for flash rust removal it
takes about 30 minutes and up to 24/48 hours for extremely heavy
rust. Periodically check the object during the derusting process
to know the status. It is highly recommended to fully immerse the
metal items, because some items not fully immersed for extended
periods may experience etching at the water-line. If water-mixed
the above time interval will increase: the more you water-mix,
the more time it needs to complete the rust removal process. To
avoid the rust removal process became too slow, do not further
water-mix beyond 1:1 ratio (eg.: 1 Lt. EVAPO-RUST plus 1 Lt.
water). NOTE: for extremely heavy rust, periodically rinse item
with water and/or softly brush item with a scrubbing tool (e.g.:
a wire brush). AFTER-: after , the part can be
water rinsed for painting, plating, or other type of corrosion
protective coating. It is important to always rinse the metal
after a with EVAPO-RUST: tiny molecules of iron will
still be embedded in the EVAPO-RUST solution, and these molecules
must be rinsed off with water or they will activate the
re-formation of rust on the metal object. If left unrinsed, the
fluid will dry on the treated surface to a hard, short-term
corrosion resistant coating with no corrosion removal properties.
As a dry film, it inhibits oxidation indoors up to 14 days,
depending on local room-humidity & temperature and metal item
shape (the more irregular will be the shape (with high energy
points), the shorter the protection will last). For long term (up
to 12 months) metal protection use the innovative water-based
anticorrosion protective with dewatering properties: RUST-BANDIT
Legal Discler
----------------
NOT brushable; recommended application methods: Dip, Fill,
Ultrasonic, Pressure Flushing, Spray, Wrap - Minimum recommended
operative temperature: 15°C - Do not use on Cadmium, Magnesium
and relative alloys - High carbon steel and tool alloy steel
items, when derusted, will have a darker appearance; much of the
carbon can be partially removed simply by wiping with a cloth -
It is highly recommended to fully immerse the metal items,
because some items not fully immersed for extended periods may
experience etching at the water-line - Use appropriate
containment to avoid environmental contamination during handling,
storage and disposal - Do not empty into drains - Keep out of the
reach of children